Acura RSX, ILX and Honda EP3 Forum banner

flange

  1. Bolt-On Basics: RSX Type-S
    What is the inner and outer diameter of the flange used for Mid pipe to axel back/muffler for the OEM Type S Exhaust? I am looking online, but cannot find anything saying the specific numbers. The FEL-PRO 61550 {#F32017} part from Rockauto looks promising but shows no real numbers or measurements.
  2. Bolt-On Basics: RSX Type-S
    I've search and searched and find no "official information" in the 'specs' listings of websites selling these parts and much conflicting information from other people. All I want to know is what size is the exhaust piping on a DC Sports race header and cat-back for an RSX Type-S. As far as the...
  3. Problems & Solutions RSX
    If I don't have and exhaust flange gasket what kind of noise would it make ? I'm having this nasty rattle when I start to accelerate from 1500rpm to 3500rpm on every gear an it's always coming from my exhaust area. I had one of the exhaust flange bolt and spring fall out, creating a massive air...
  4. Want to Buy or Trade EP3
    Like the title says I'm looking for a GT28 turbo t25 flange, that's got the 5 bolt v band set up. It must be verifiay in good shape! Send text to 860 978 17five 4
  5. Bolt-On Basics: RSX Type-S
    I was try to get my 2 1/2" vibrant flange for my PLM headers . But i was searching . And i cant found it . Wheres the best place to order it ? And Where i can get the best price in it , also. ? Please help me to found some good stuff . Thanks.. Albert
  6. General RSX Discussion
    I was wondering if anyone had a CAD file of the k20 exhaust flange or the dimensions, been making a bunch of cool car parts in CAD lately, I have made this already, ka24et
  7. Southern California For Sale: Local Pick-Up
    I need A donut gasket. Needs to fit with megan shorty connected to megan down pipe. 2.5"
  8. Southern California For Sale: Local Pick-Up
    Hi everyone, I am looking for two bolts and springs which are using to connect the mid pipe and the back exhaust. Please make sure those are came from 05-06 type s, I don't know that the 02-04's are going to fit or not!
  9. Canada East: For Sale & Want to Buy
    close
  10. Bolt-On Basics: RSX Type-S
    I have a 3 " k teller exhaust that i need the flange to bolt to the cat. been looking at the ones in the crsx store. will the 3" 3 bolt flange bolt to the stock cat?
  11. Bolt-On Basics: RSX Type-S
    I need to know what size flange to buy to weld to my 3 " exhaust so that it will bolt to the stock cat. Thanks
  12. Engine & Transmission RSX
    FS: 2005-2006 Type-S Flange Donut Gasket OEM Honda (not aftermarket) 18229-S6M-A61. This is the gasket that goes on the header and then is the downpipe. New not installed. Got for $35. Sell for $15 (include shipping, 48 states, w/tracking) ACTUAL PICTURE: #14 ONLY in this Illustration...
  13. Forced Induction & Nitrous RSX
    HKS Flange- 17 shipped Greddy sandwich adapter- 20 shipped. PM ME!
  14. North East For Sale: Local Pick-Up
    whats up guys i just bought an exhaust off fellow member i need one side of the vband flange if anyone local has a set for sale let me know i wanna install this asap
  15. Want to Buy or Trade EP3
    Looking for stock axleback piping and flange. Trying to make a custom axleback without messing with stock mid pipe.
  16. Want To Buy or Trade RSX
    Delete !!!!!!!!!!!!!
  17. Bolt-On Basics: RSX Type-S
    So I was wondering about the dcrh flange. I'm planning to get a custom cat back done but not sure if a 2.5 flange would work? I believe the dcrh isn't 2.5in it looks more like 2.25in. I was also wandering what's better 3bolt flange or 2bolt flange for the mid pipe and axle back connect. Any...
  18. Southern California For Sale: Local Pick-Up
    Im in San Diego area, Poway to be exact. cash pick up only im willing to meet up if its not too far.
  19. Welding, Fabrication, & Tools
    I purchased a Greddy Evo2 for dirt cheap, and it's missing the flange connecting the Cat to the B pipe. I was just wondering if this is an easy fix? I'm assuming that a local exhaust shop that does custom work could handle this easily.
  20. Turbo RSX
    I'm pretty fed up with the greddy turbo's internal wastegate not opening and causing me to over boost (Thank God for K-pro's boost protection). I have to push the arm open with my air compressor and it works for a few weeks, then it goes back to doing it. Unfortunately I don't have the money to...
Top