Acura RSX, ILX and Honda EP3 Forum banner

flush

  1. Car Audio, Security, & Electronics RSX
    I think I missed a screw when I reinstalled my Bose Stereo system, because it is not sitting flush and is sagging. Also is there a reason the climate control widget is sagging so much? Thanks Pics: https://imgur.com/a/Id15g
  2. The DIY Garage RSX
    Hey guys, Just have a quick question about the brake fluid flushing. I was thinking of buying some cheaper brake fluids to flush the system with, before using the more pricier Honda OEM Dot 3 Brake Fluids to fill up. I am planning to buy 3-4 bottles of the 1L Honda OEM Brake Fluids and maybe...
  3. The DIY Garage RSX
    Hey club! I recently passed my 100k mark on my '03 type s and I've been wanting to flush my radiator for a while now. I was wondering if I can use Beck/Arnley Blue coolant? It says that it's compatible with the Honda/Acura Coolant. My local parts store carries it that's why. Thanks for your...
  4. Problems & Solutions RSX
    I have been wanting to flush my 06 Rsx type s trashy fluid, it currently has 55500 on the clock, would it hurt to do it so late, I believe it's never been flushed
  5. Problems & Solutions RSX
    So I changed out my headlight today because my car was in a hit and run and they hit my driver side fender and headlight. I bought a oem headlight off a local rsx guy and the headlight doesn't seem to sit correctly. The headlight sits about 1/2 inch higher than my old one idk why. And also it's...
  6. Wheels & Tires
    Hey guys, I just pick up a set of Enkei RPF1 17x8 .45et in front and 17x9 .45et on rear, Currently I'm running Stock 17x7 .45et wheels with .25mm spacers on Tein S Tech springs which give approx. 1.7" drop in front and 1.6" in rear. It's pretty flush to the fender from front to back, a little...
  7. Problems & Solutions RSX
    Hey there guys. I accidentally jacked my radiator harness and now my hood won't sit flush if I try to lower it down... Did I break anything? Is my hood the least of my problems? How will I go about making my hood sit flush again?
  8. Problems & Solutions EP3
    Hi guys I'm looking for a how to guide on coolant flush on Honda Civic Type R EP3
  9. Wheels & Tires
    I'm on stock suspension right now. I'm looking to buy Mb battles 18x9 30 in the front 18x9.5 15 in the back. I want a slight flush with the wheels sticking maybe half an inch or slightly less, from the fender with a slight stretch in the tires. Nothing crazy. It will be a daily so I want...
  10. General Discussion EP3
    Hey all. I just purchased an EP3R and I love this car. It is currently on SSR Type-F's and while these are nice wheels they don't really suit the EP3. The car is only slightly lowered. My guards are not rolled. I am after something that will sit flush with the guards without having to run...
  11. Wheels & Tires
    I have Work Emotion CR KAI 18" x 7.5, +42 offset all around. Which size of spacers should I get, or is there anything else I can do to make them flush? They are wrapped in 225/45/18 tires. Thanks!
  12. Problems & Solutions RSX
    After a transmission fluid change and oil change (that I performed myself) I noticed that my speedometer didn't work. I opened my hood and realized the VSS plug wasn't plugged in (it was bolted in however, just not plugged in) but the speedometer still doesn't work. We swapped out the VSS for...
  13. Problems & Solutions RSX
    so my fenders arnt flushed with my hood they are stick up, so when you run your hands down the line, the fender is too high? solutions
  14. Problems & Solutions RSX
    i drive a 05 rsx-s. i wanna know if i should do a transmission flush? the car as 125k mil on it. i bought it with 121K and dont know if they very did a flush.
  15. Problems & Solutions RSX
    I know their has been a diy here before well many but don't be rude and say look it up. I'm planning of flushing everything out to put fresh honda type 2 in the system so I will be taking off the block drain bolt and the radiator will be empty my question is is there harm due to the block not...
  16. Wheels & Tires
    just bought a set of wheels 17X7.5 +40, what would be the optimal offset for my car to be sitting flush.. would i need any spacers?? ive tried searching but nothing so far??
  17. Member Show-Off RSX
    Hey guys. I shot Jaycray of Royal Flush's RSX last night. 3 pictures. Enjoy :thumbsup: For photo inquiries: www.facebook.com/jordanmophotography www.jordanmo.com 1. Royal Flush Acura RSX by Jordan Mo Photography, on Flickr 2. Royal Flush Acura RSX by Jordan Mo Photography, on Flickr 3...
  18. Problems & Solutions RSX
    Hey guys I'm reinstalling my tower after installing the mtec race springs, but the tower get stuck about a centimeter from flush. The top arm that pivots back and forth will not move. I double checked and made sure everything was put together right. Any ideas?
  19. Problems & Solutions RSX
    In the past I've replaced the CMC and slave and put in a Ktuned SS line. I've changed the fluid before no problem, but now its been awhile and pedal has some mush to it. I have some Honda brake fluid laying around and some Motul 5.1 from when I did the brakes. Could I get away with using the...
  20. Wheels & Tires
    my wheels are 18x7.5 225/40 . what steps would i need to get that flush look? do i need to get wider tires? Thanks.
Top