Acura RSX, ILX and Honda EP3 Forum banner
functional
1-18 of 22 Results
  1. Wheels & Tires EP3
    So I just recently picked up a set of Eibach Pro Kit Springs with roughly a 1 inch drop on all four corners that i have yet to install. My question is what wheel and tire size should i get to have a meaty fitment? ive been browsing around for quite some time but i wanna see if any of you have...
  2. Member Show-Off RSX
    Car has been through a few changes. Was completely Stock. More pictures coming as soon as my computer stop being stupid. Engine: Ported RBC intake manifold (polished) Injen CAI Hybrid Racing Shift bushings K-tuned tps Strup race header HKS hi power 65mm exhaust Kpro with vittuned street tune...
  3. Member Show-Off RSX
    NEW PICS PAGE 4 Current State Lets just say I was lucky enough to have this car handed down to me from my dad after he drove it for 5 years. Thanks pops. Received the car in stock form and started chipping away at it! Heres the main stuff. Little stuff I'll just skip over. For starters, picked...
  4. Member Show-Off RSX
    ***Updates in post #35, 05-06 rear end conversion finished, plenty more to come*** 4/13/14 Update teaser with new rear end: Had the car for a about a year or so, spent the winter putting it together while it was in storage, didn't want to make this thread until I was finally happy with how...
  5. Exterior Mods RSX
    Is it even functional or just for the looks? :confused::confused:
  6. Wheels & Tires
    I am currently on a set of work xd9 17 x 9.5 +17. My tires are stretched right now but I want to get away from that and run wide tires. My question is basically what should i do? I love my wheels but they might be too aggressive to run 255. If at all possible it would be a lot easier for me to...
  7. Member Show-Off RSX
    http://youtu.be/FKlviR4CSYA Motor(K20A2): - ARP Head Studs - Blueprint Stage 2+ Camshafts - Blueprinted - 86.5mm Wiseco 11.7:1 Pistons - Blueprint H Beam Rods - New OEM seals/bearings/gaskets - Mugen Head Gasket - Hytech Race Header - Jackson Racing Supercharger w/ 3" Pulley...
  8. Wheels & Tires
    If you have a car with aggressive wheels and tires that fit post them upppp. FUCK STRETCHED TIRES!!!! RULES: NO FUCKING STRETCHED TIRES tires must be 235 or wider 245/40/17 s drives all around :awwyea:
  9. Problems & Solutions RSX
    2002 Type-S, maybe 85k. For the past 6-8 months or so, the clutch has worked just fine (no slippage, no problems shifting) but has pretty low resistance as a DD. Prior to that, it was parked for about 3 months while I was out of the country, and before that it was a DD. I do not remember the...
  10. nfs

    Exterior & Interior RSX
    Not for sale anymore
  11. Lighting EP3
    So I'm looking to get a pair of cheap (used doesn't deter me) CTR Projectors, because they look cool (at least I'm honest :rotfl:) and for the sake of late night safety, because just driving slow is lame :D Unfortunately, lurking was completely useless for me, all this ballast, retrofitting...
  12. Wheels & Tires
    hey guys so right now i have works xd9 17x9.5 +28/38. i have 10 and 20 mm spacers so im +18 all around, this had to do with clearance issues with the coilovers and rear arms. my tires currently are 245/40/17. i am at a 1 finger gap all around, but i want to be flush. problem is my rear is...
  13. Exterior Mods RSX
    Guys, Quick question (or maybe not?), after filtering on search, can't seem to find what I want, but to those who own a diffuser, is there much noticeable difference, and especially if you do race/track days? I'm looking to improve on all aspects of aerodynamics on my DC5 and looking for a...
  14. Member Show-Off RSX
    Hey guys, Though i'd share my minivan ;) I've owned my CTR for nearly a year, i've gone through loads of different things, different tyre sizes and i've always wanted to keep the car functional whilst being wide and low as well.. I've currently got ET25 17x8.5s with a 215 45 tyre and have no...
  15. Texas For Sale: Local Pick-Up
    I have a brand new Scoote hood made by Carbon Creations. The hood has been installed for 1 week on my car, I spent 4 hours making sure I drilled the holes perfect and installed brand new carbon fiber hood pins with key locks (2 keys included). The studs for the hood pin locks do not require any...
  16. Exterior Mods RSX
    Yes, I've searched. I've searched all over the place (and asked a couple of questions in another thread), but I still can't get a clear answer. Does the Type-R wing have an angle to the ground and/or an airfoil? Or is it for looks only? The thing looks pretty big and showy, but I can't imagine...
  17. Member Show-Off RSX
    Updated first post... Pics on most pages. Newest pics on pages 16 and 17 I have been using the car as my DD for the last 6 years and 90k miles... Just picked up a new DD about a month ago though. I was getting kinda bored with the car so, instead of tradeing it, I decided to start building...
  18. Exterior Mods RSX
    I may be imagining things, but I thought I saw someone write about a carbon fiber hood with a functional hood scoop that hooked up to a CAI. Can anybody tell me who makes a set-up like this, how much it costs, and what they think of the performance, fitment, and looks? I'm thinking about this...
1-18 of 22 Results
Top