Acura RSX, ILX and Honda EP3 Forum banner

handle

  1. Southern California For Sale: Local Pick-Up
    Got a couple of extra things laying around i thought I'd sell. Will update if I find anything else or when anything on the list is sold. All photos can be viewed at this link: https://photos.app.goo.gl/8Ws4yVqKfGXs8ESs8 PLM Race Header - 200 Slip joints are welded and upper portion is heat...
  2. The DIY Garage RSX
    Tried to replace actuator, accidentally broke the plastic clip that holds gold rod to the door lock actuator (not the handle side). Anyone know the P/N? I check acurapartwarehouse and oemacuraparts diagrams but didnt see it. My closest acura dealer is 45 minutes away. Trying to see if I can...
  3. Want To Buy or Trade RSX
    Looking for OEM driver side exterior door handle in NHBP
  4. Want To Buy or Trade RSX
    Looking for a driverside exterior door handle for my 04 rsx type s. The nighthawk black that was factory as well. Broke mine recently. Thanks
  5. Want To Buy or Trade RSX
    Looking for a stock airbox with all tubes to it and a passenger door handle shipped to 40205 if you have either give me a price text 502-500-1591 or post here thanks
  6. Want To Buy or Trade RSX
    Wtb (abp) driver side door handle.lmk thanks
  7. Welding, Fabrication, & Tools
    New member - not a total newb, but I have a question that will probably get some slack. Is there a way or switching the exterior door handles for a different style? Maybe one that sticks out and have a bar going across as opposed to the current flap style? Idk if I'm using the correct...
  8. Problems & Solutions RSX
    Hello all :) my first post here. I don't own an RSX, I actually drive a 2000 EJ8, but looking to put RSX seats in my car. I got the seats from a friend for a good price but I noticed the driver's bottom rail handle, the handle that's used to slide the seat back and forth is missing, pictured...
  9. Turbo RSX
    My kraftwerks charger shaft broke on me so now im deciding to go turbo...i want more power...i was pushing around 400hp with the c30-94 @ 15psi...but now i wanna hit the 500 mark...i jusy need to know what the stock block is capable of handling...any info is much appreciated.
  10. Interior Mods EP3
    Anyone have any ideas on painting this? I feel like regular paint will scratch right off. Tried searching but nothing good came up. I'm guessing I'm not the first one to have this happen though. Thanks!
  11. Exterior Mods RSX
    can someone tell me where I can buy an exterior door handle that would fit on my 2002 RSX type-s because the one they sell in autozone, oreilly etc... don't fit even thou it says that is a direct fit!!!! the manufacture they get it from is "doorman help" an I'm trying to avoid going to the...
  12. Want to Buy or Trade EP3
    I need a drivers side door handle for my 04' ep3, let me know what you have!
  13. Want To Buy or Trade RSX
    as the title states, i live on guam.
  14. Want To Buy or Trade RSX
    like the title says. driver side door handle in ABP 7577482277
  15. Problems & Solutions RSX
    I searched and haven't seen this. I'm guessing it's not stock but maybe something the dealer did. It has this peeling layer on the door handles and right under neath the refill spot for the tank. I can be aggressively scratched off with a finger nail leaving the paint underneath. Was...
  16. Want To Buy or Trade RSX
    in nhbp only for cheap email me your price.....thnx!
  17. The DIY Garage RSX
    Hey guys, i found this guide, among a few others for a DIY guide on how to install an Door Actuator. http://forums.clubrsx.com/showthread.php?t=838708&highlight=rsx+actuator I cannot for the life of me get the door handle cover to come off. As all the guides say i used a small screw driver to...
  18. Part Outs RSX
    Pretty simple. Just need the plastic door handle part that goes on the outside. dont feel like going through a bunch of feeds and asking so just lmk if you have this part and shoot me a price. thanks to all readers.
  19. Problems & Solutions EP3
    Hey guys...my fuel door release cable just came apart today with a slightly rusty and frayed cable up by the barrel nut that locks into the release handle. There's little less than an inch of cable exposed past the white plastic neck but I can pull on it with a pair of channel locks to open the...
  20. Turbo RSX
    Currently I'm in a Honda Civic (em2), and looking to get a RSX Base Model (5 speed) as I would like something with a bit more potential. While I know a fair amount about D-series engines, I know little about the K-series, so I'm trying to start expanding my knowledge. Running low boost (from...
Top