Search Results for ‘holes’

Just purchased a 06 RSX Type S that has what i believe a replica Type R wing. Due to the removal of the deck spoiler to fit the wing it left holes. Besides bondo and painting are there any options? I included pics below. https://imgur.com/a/huaB0

Hello guys, again, I have a 2002 RSX-S with the short stock spoiler. I want to remove it and either put a aspec wing or type R. Or just a deck lid lip. does anyone know if I put the deck lid will it cover the holes from the stock spoiler? thanks:vtec:

Hey everybody! I recently bought a valve cover from K20a.org. It looks like a good K-series valve cover but it has 2 (for lack of a better word) nozzles on the backside of it. Does anybody knw what these are? and will I be fine if I just cap them up?

Does one exist? :fistbump:

ive seen some pictures on google images that are trunks with look clean with no holes that the badge goes into ill post a link at the bottom because its super long but I wanted to know how I would get one it doesn't look like its plugged with anything...

I have a Carbon Creations hood I bought a while back, but the nozzles that came on it are not only obnoxiously large, but one is way off center. Since I no longer have my original hood to reference and I'm finally getting tired of the weird look and poor water atomization, I tried searching and...

I have a 05 SSM base hatch with spoiler holes, looking to make a trade for one without. Let me know. I'm in South Jersey.

Read around but have found a lot of conflicting info. Looking to get a Type-R replica CF spoiler from Megan Racing. Currently on my 02 Type-S, I have the OEM wing. Are the original holes going to be hidden by the Type-R wing or will they need to be filled?

anyone know where they reupholster in OC?!

I tried searchig but couldn't find anything will a decklid cover my wing holes ? If not what can I do ? I'm kind of tired of the wing & wanna switch it up

Anyone have a hatch any color w/o holes drilled? doesnt matter on color and also doesnt necessarily need hatch glass let me know.. needs to be shipped to utah.. or located in utah :thumbsup: :iptf: :chuck:

I recently just hit the money shift. 3rd to 2nd. My 3rd grinds and for some reason it would slide easily in and out. It feels as if it doesn't have that resistance before shifting into gear and so I (being an idiot) failed to shift correctly. As i felt the jerk, I realized what happened, but...

So I've always loved the look of the off center license plate. Used to just use a regular mounting bracket cemented to the bumper (or screwed into it like most do) on my integra. I never like the idea of screwing holes into something I may take off later so my question is does anyone have a...

What has everyone used to cover the holes from a previous wing... Need advice please.

Well I went all nuts and decide it to do a cosmetic change in the EP3. I got board and say why don't we put something useful in the empty spare switch things. here it is and the other side let see what other have in there.

I know its a long shot but my car came with the oem type-s low wing so it has the holes there already and I want to trade it for a wingless hatch in my color. color is PWP and would like to trade for a PWP one. text me at 510-789-7844 or pm me on here

Removed my low rise spoiler and around 2 of the holes there's rust. Which would be the cheapest and most effective way to fix this? A. Sand out rust, bondo over holes and use some touch up paint. B. Have a shop professionally fill the holes and re-paint hatch. C. Buy a wingless hatch...

So i just got my Type R spoiler but dont have the mini decklid to cover the 8 holes from the oem decklid on my trunk, do you guys think this will do the job? has anyone done this? if so, some pictures will be nice before i buy it. thank guys...

My aftermarket wing has been off for a while now. My dad tack welded the holes and sprayed it for me cause I suck at bodywork. Anyway, here is the vid: http://www.youtube.com/watch?v=nAqp2TCPisg

ok guys so im drivin home n my rpms dropp to idle i pop the hood n notice the axle popped out of the trans on the passengerside well looking under the car today i noticed my axle support bolts are missing so i get new bolts start threading them in n the holes are stripped out any suggestions on...