Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 91 Results
  1. Bolt-On Basics: RSX Type-S
    I'm new to after market part but not new to fixing my own car and I went to school for it too. So I need help with my 2004 RSX Type-S skunk2 pro throttle body. My set up is Borla cat-back exhaust, skunk 2 pro manifold, PLM Headers and skunk 2 Pro Throttle body. When I installed it, it started...
  2. Problems & Solutions RSX
    Was installing cold air intake yesterday. I ordered the secondary hose from INJEN and they sent me some tiny ass vacuum hose that was way to small. So I went and bought some hose that was obviously a little to small but still fit. When I was putting he hose on it took a little bit of force , and...
  3. Southern California For Sale: Local Pick-Up
    Bought some! Thanks! Delete!
  4. Problems & Solutions RSX
    Anyone has pictures of all the hoses that goes to the throttle body and the ones to the bypass tubes
  5. Problems & Solutions RSX
    This is my 04 Type-S with ~90K miles, while I was changing the transmission fluid today I noticed that I have a pretty decent oil leak, then I saw my alternator covered in oil. As you can tell in the pictures the leak is not coming from the oil filter. What are your guys opinion? 1. It's not...
  6. Southern California For Sale: Local Pick-Up
    Got 2 sets of gold Skunk2 LCAs 1 complete with everything comes w/ 2 control arms 6 extended studs and removal socket The other is incomplete comes with 2 control arms and removal socket Missing studs but I'm pretty sure u don't need them Since Blackworks the ones I have didn't come with and...
  7. Southern California For Sale: Local Pick-Up
    I got some used samco hoses nothing is wrong with them. asking $60 bucks picked up in oceanside
  8. Problems & Solutions RSX
    I want to get this hose but i don't know if i would be able to bend them for my needs. Does anyone know i could bend them. http://www.autosiliconehoses.com/silicone-polyester-reinforced-hose-30mm-choose-from-15-colours.html
  9. Bolt-On Basics: RSX Type-S
    Hey so a friend of mines like always is to impatient and has to have it right away and bought a spectre intake filter from autozone while he waits for his injen to come in. My question is he already installed, removed the stock box, since it's just the filter piece and no piping he's got it...
  10. Problems & Solutions RSX
    I can't seem to either of these hoses off. I'm trying to remove the air filter box. I'd be fine with removing either A1 & A2 or B in the image if anyone has suggestions. Also, where would I find a replacement hose? Because mine is pretty worn, as you can see.
  11. Engine & Transmission RSX
    Hey guys I have both hoses for the radiator for sale; they are Gates brand. I thought I was going to need them when installing my radiator but didn't use them. Let me know if you are interested. 30 dollars for both. I also have these things for sale. -02-06 RSX Right passenger fender liner -...
  12. Turbo RSX
    Got a buddy that I'm helping turbo '05 Type S, We can't seem to figure out how to reroute/relocate the coolant lines coming off the block to the heater core and the engine harness. Do you guys just use new cut to length hose and reroute it or is there something else? I was told there was a...
  13. Engine & Transmission RSX
    AEM CAI off a 2006 Type S does NOT come with hoses or washer bottle . I purchased a new Injen SRI and had to cut hoses that came with the AEM CAI for install. The intake has scratches as seen in the pictures. Approx 20k miles on the CAI and the filter is pretty dirty. You can purchase vacuum...
  14. Problems & Solutions RSX
    Hey, I recently straight traded my Short ram intake for a ingen cai. I was tired of heat soak. When we traded we had trouble fitting the cai and it was sort of a quick job. Well to get to the point after we traded I now have 2 open hoses, the ones that come out from the valve cover. Do i Need to...
  15. Engine & Transmission RSX
    Hoses are used in good working condition. No cracks, tears or rips in them. Selling bc, well they are purple and dont match my engine bay color scheme. Also selling steel braided clutch line from the clutch master to the hardline, in good condition, no leaks, cracks, or splits. NEED GONE...
  16. General RSX Discussion
    I recently swapped a k24a into a Rsx and I can't figure out what three hoses go into the first hoes come off the Metal hose off the thermostat I don't know if I should block them off or what .......the second one come off of the tb witch is a a3 tb ....it hangs off the bottom of the t.b.and i...
  17. Engine & Transmission RSX
    *SOLD* I have a Comptech Titanium Strut Bar for sale in great condition. I bought it not knowing it won't fit on my 05, they only fit on 02-04 yrs. $155 shipped. I ship USPS Priority with tracking number. Need this gone, its just taking up space.
1-17 of 91 Results
Top