Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 48 Results
  1. Suspension, Chassis & Brakes
    https://youtu.be/GqiWzYinaI8 https://plus.google.com/113756625081569813673/posts/FXRS3xN2RQb Got them installed and ride quality is really nice. It's feels really sporty and firm. Ride height increased a bit too because the oem ones were totally dead. [/URL][/IMG] [/URL][/IMG] [/URL][/IMG]...
  2. Lighting RSX
    My driver's side headlamp assembly cracked and I need to replace it. It and the passenger side lights are both sort of hazy and scratched and that's how they were when I bought the car, so I figured I'd replace the passenger headlight assembly also or else they would look unmatched. I looked up...
  3. General RSX Discussion
    I know there has been a lot of talk about the Mugen airbox on the site thus far. Just thought I'd share my thoughts/experience on the topic as well, in case anyone is wondering about it, and how it rates to a CAI. My RSX came with an Injen CAI, so I have no experience with a stock airbox. I am...
  4. Transmission EP3
    Hi all, I installed the neuspeed SS yesterday. I also had my shifter cable bushings and shifter base bushing upgraded to alum a while back. My question is: Would these upgrades put a lot of stress on my gearbox?. I feel like after Neuspeed SS, I have to shift harder than before. I think my 2nd...
  5. All Motor RSX
    I have a stock rsx type-s and im debating before doing any other mods....i want to hear opinions from all the k24 swapped guys out there coming from the k20z1. I was looking to do a supercharger in the near future. But im starting to become a big fan of all motor reliability. Im wondering what...
  6. Suspension, Chassis & Brakes
    I believe my passenger side ball joint is bad so I'll have to order one, and while that's coming out, the rubber looks bad on the compliance bushing as well. I was thinking about getting the Mugen LCA & Compliance bushings for my control arms. My guess is that they are like their motor mounts...
  7. Suspension, Chassis & Brakes
    I swapped from base to Type-R suspension today and just wanted to share some of my initial impressions. First my impressions on the stock base suspension with Yokohama S-Drive rubber. The biggest gripe I had with the stock set-up was the amount of body roll on sharp turns. There was definitely...
  8. Auto X & Road Racing
    At long last, my suspension is stock no more. I've spent the last 6 weeks ordering and installing a GC+Koni setup that, after a day at Evolution Phase 2, I can say I'm very happy with. Pics later. Here are the details. Ground Control coilovers: 500# front, 850# rear Front shocks: Koni 8610...
  9. Transmission & Drive Train RSX
    I'm throwing calculations around with the different final drives and think the 4.052 final drive would be ideal in the 6-speed trans for the base. I found someone selling theirs with low mileage and am thinking about snatching it up. I had an Integra LS with the GSR transmission and absolutely...
  10. Bolt-On Basics: RSX Type-S
    well guys this past weekend while changing my rear main seal (which i pushed in a little to far but have driven 450 miles and no leaks so i think im good) i also added some bolt on parts. i installed an injen cai, kiddracing header and 8lbs flywheel. all i can say is what a difference! wish i...
  11. Car Audio, Security, & Electronics RSX
    I am looking to buy a headunit and was looking at the Kenwood excelon KDC-X993 The specs look great and all for 300 bucks give or take please provide some feedback on the kenwood line and this model
  12. Suspension & Brakes EP3
    I was lucky enough to be chosen by Function 7 to test this rear LCA/Sway bar brace. I am running the Function7 LCAs as well. I recommend the setup for aftermarket spring/struts or coil overs, as this leads to heavy overseer if used on a slopy supension. Now, for those with full-race setups...
  13. Suspension, Chassis & Brakes
    I was lucky enough to be chosen by Function 7 to test this rear LCA/Sway bar brace. I am running the Function7 LCAs as well. I recommend the setup for aftermarket spring/struts or coil overs, as this leads to heavy overseer if used on a slopy supension. Now, for those with full-race setups...
  14. General RSX Discussion
    Cliff Notes: Before = Mugen Catted Header + Fujitsubo Power-Getter After = Mugen Catted Header + Mugen Twin-Loop Results = Slightly louder that Civic Si maybe?? Good tone/sound, but quiet... After farting around with the idea of swapping out my Fujitsubo PG for the Mugen twin-loop, I decided...
  15. Suspension, Chassis & Brakes
    I installed my BC RSDs yesterday replacing my old Megans, and got them aligned today after work. One thing was apparent: Wow. great dampers, they were so much more predictable, lost less confidence due to road imperfections, and took bumps much better. I haven't had a chance to take them out...
  16. Motorcycles
    Welp, picked it up today and went for a short ride with jp182. First things first, stand up fellas at monmouth cycles! Got the bike for just over 8500 otd, 7 miles on the odo :) So all the mags said the r6 lacks low-mid range grunt. Oh boy does it ever. The thing is borderline anemic below...
1-16 of 48 Results
Top