Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

21-37 of 270 Results
  1. Suspension, Chassis & Brakes
    Ok well .. Heres whats going on .. I bought coilovers, went with progress. Installed em, first day of installation i requested for it to have no finger gap in the front and atleast half in the rear .. when we took the car off the lift it looked pretty good but somehow after that the rear just...
  2. Suspension, Chassis & Brakes
    I searched around and didn't find any reviews or talk about the buddyclub brake kit now being sold on kseriesparts as seen here: http://www.kseriesparts.com/cr/BCS-BC07-RSBRKDC5.html I'm looking for any more information and reviews of this kit as well as replacements parts being compatible with...
  3. Supercharging RSX
    hey guys figured i make a thread about my sc build since im doing a nice setup an im totally new to forced induction ive always wanted my rsx to be sc since day i bought it at honda. here is my setup of parts i have! comptech sc kit comes with all 4 pulleys merc racing auto tensioner 650 cc rc...
  4. Transmission & Drive Train RSX
    So my buddy Tony (Street Ethnics) is giving me an awesome deal on the above set up (Competition Clutch Stage 4 pressure plate and Clutchmasters stage 2 kevlar clutch disc). I am curious as to the driveability and longevity of this setup. I know longevity is relative to different factors such...
  5. Problems & Solutions RSX
    I pulled up camshaft position sensor A bank 1- ckt range /perf Car starts but won't stay running. Is it just the sensor or something more??? Please Help!!
  6. Suspension, Chassis & Brakes
    It's time to replace my pads and rotors all around. Stock prices are laughable so I was looking at after market. I was looking at centric blanks or EBC blanks with Hawk HPS or ceramic pads. I also considered the powerstop upgrade kit with stainless lines, but they only have slotted or drilled...
  7. ECU Tuning RSX
    can anyone give me some input on my calibration? i just wanna make sure my engine isnt running dangerous to the point where i shouldn't be revving it high. thanks in advance mods- i/h/e
  8. ECU Tuning EP3
    Im wondering if its ok to run the kpro in the high octane map with my setup. I currently installed skunk2 stage 1 cams skunk2 mega power race header and password jdm intake. Im assuming the high octane map is like the reflash im not trying to spend money on a tune now cause im building a motor...
  9. Turbo RSX
    I want to buy a turbo kit for my rsx this spring and I have been looking at a few different options. I am looking to see what some of you guys would recomend, I want to just run low boost on my stock engine (a2) this year and build my engine next winter. So to keep it short what is a good...
  10. Suspension, Chassis & Brakes
    So im running an 02 type s with stock struts and ground control springs. When driving mainly my front passenger side rattles a good amount. After reading this forum im pretty sure the struts are blown due to the shortness of the ground control springs. I know the ground control springs are...
  11. Car Audio, Security, & Electronics RSX
    I need help/advice on my new stereo set up. These are gift from wife/kids and friends so not really ideal combo, but I am stereo noob and checked it will not break each other and should be good on paper. However, I am not getting the sound I expected from these items. My expectation was...
  12. Exterior Mods RSX
    I understand i have to get new bumper and new headlights, but for the back what do i have to change? just the bumper or tailights too?
  13. Suspension, Chassis & Brakes
    Hey i have an a-spec suspension on my car. im satisfied with the front drop but the rear drop is not enough. So i was planning on using Progress Springs on the rear to drop 1.4 inches. But what are your thoughts on using progress springs or springs in general with a-spec suspension? Thanks
  14. Problems & Solutions RSX
    Hello All, First gear started making a nasty grinding/click-clank sound today and hasn't stopped. It only happens when driving in first gear and stops when I push the clutch in. I did some research and from what I've found from similar problems was that it's either the Input Shaft Bearing or...
  15. Problems & Solutions RSX
    I have horrible second gear grind and have tried almost everything to fix my problem and so far it still hasn't gotten any better. My question is where should I take it to get it fixed or possible send it into to get synchros replace. I live in VA if anybody knows of a relatively inexpensive...
  16. Engine Building & Design
    hello crsx, i have been looking into doing frank build motor and i am at a point where i need help. i know there are 4 types of 2.4L blocks, and the tsx motor can only safley rev to about 7300ish rpms the power im looking to net is anywhere from 250-300hp and at least 200-230wtq, i also want...
  17. Transmission & Drive Train RSX
    So my 06 rsx type s is making some rattling noise when i accelerate or in neutral but when pressing on clutch it stops...i read alot of other peoples post saying they have the same problem n its the input shaft bearing...i just want to know how to fix this problem n where do i start thanks
21-37 of 270 Results
Top