instal

Installed racelands and reused top hats. The back made a rattling sound so I took a look and the washer below the top bolt on top hat is loose... Does this sound like I didn't rebuild correctly or just need to tighten the top bolt down again?

Hi all of the wonderful ClubRSX forum that have so graciously helped me in the past, I come in search of sage wisdom of those more experienced than myself. I live in Voorhees, NJ so to this is to the all the people around the area. I'm planning on having a remote starter (specifically the viper...

Hey guys. I just bought a V1.1 PWJDM shift knob off of a member on here and have heard horror stories of people having to rig up their boot for certain knobs. Anybody have any experience with this one? does it attach to the stock type s boot? He said he didn't have to do anything special for it...

I've been through countless DIYs on here only to find that my harness doesn't match up with ANY of them. I realize there are many threads for this but I'm looking to see if anybody has one for those specific ones. Ebay fogs. Ikon Motoring yellow DC5 fog lights with switch thanks!

Im looking for a DIY to instal a radiator, condensor and thrmostat !! If someone has it pleasy post it here thanks !!

i get a code for an evap purge selonoid because the line that goes into the throttle body is now plugged and the skunk2 doesnt have that vaccum setup what do i do

Well I pretty much have completely my video series. It became way bigger than expected. Both in the fact the people like them and that I only anticipated making 2 and now there are possibly 6... As requested though I am going to add them to the D.I.Y section. These are not a straight forward...

Today I'm going to walk you through how to do a pedal installation. I'm going to be installing ITR pedals onto my DC5. Tools needed: Drill/drill bits Rivet gun and rivets Center punch Towel Block of wood Lets begin! First layout your pedal to just make sure you got them and glimpse of the...

So while my buddy Gigs and I installed my sweet new fog lights he also took pictures for a D.I.Y fog install. So here we go~! First you want to start by removing the battery tie down and removing the cable from the battery. Remember always remove ground first then power. And when installing...

anyone got pics / info on install of LED mirror wiring etc on a RSX type 05? :):dontknow:

got a pair incase you want to customize it for a hid install without ruing your stock 1s.. $20 shipped

just installed the front coilovers on my car. and i was afraid to really even lower my car due to the threads almost touching the axel.? am i doing something wrong lowering it? dont flame. is there multiple ways of lowering it.? a detailed explination would be great

so i was coming home from LA last weekend and i noticed that when i pressed on the gas, my engine would over rev to accelerate just a little. then i noticed my speed was reducing for no apparent reason. i tried downshifting, but my clutch would not engage. so i pulled over, popped the hood and...

hey i'm looking for somebody that knows how to install a greddy turbo kit to come install my kit.. i'll pay you of course. i dont want to take it to a shop cuz they rape on installation and i want to see how it's done and get pics of the process and everything. so if there is anybody with a lot...

I looking for a place to install an aftermarket clutch in my 2003 EP3 w/k20a2 swap. Any suggestions. I just want to install good stage 1 clutch kit. I'm thinking Exedy Organic. Thoughts?

So i installed my CAI, and randomly my horn went off cause i was trying to do something, so i had to actually unplug the battery. What made the horn go off was me pushing the throttle body back at a dif angle. So i get done finaly everything is together.. and the car wont start! No display on...

So I just got a '03 RSX Type S and I wanted to start getting into modifying but I am worried I don't know enough. I want to install as many of the parts I buy as I can. Right now I am getting ready to order the basic bolt ons and I was wondering if a basic mechanical know how would be enough to...

Hey guys, Im looking into buying the 6500k Phillips HID kit from XenonDepot. But I have the ebay angel eye projector headlamp housing... Has anyone done an HID install with these headlights? or does anyone know if it is just "plug and play" (with the xclips that come with it)? Thanks guys I...

i have no idea how to do it, me and my friend are bored as shit, help me out i have no idea how to do it, u can call me if u watn lol we want to do it now 636 278 0415 hah ill check back later, and there is only 3 wires i hope thats right.?

Im going to install a new clutch in my car im just wondering if there is anything that i should look out for. Any tricks to making the install easier. i will + rep u for any help thanks.