Acura RSX, ILX and Honda EP3 Forum banner

installation

  1. Rear inner fender splash guard installation

    Problems & Solutions RSX
    I own a Base 2004 model. I picked up a couple of splash guards ( part # 74591-S6M-000) for the back of the rear inner fender from a 2003 wreck since my car did not have them. How do these install at the wheel well opening? Does the splash guard go in front of the wheel well lip or behind it? I...
  2. JRSC installation manual

    Supercharging RSX
    Sorry if this has been asked before, I've tried searching the forum and through google but could not find it. Does anyone have a copy of the JRSC installation manual for a 03 type S that they can share with me. I am a second owner of the car, and do not have the original copy. A mechanic buddy...
  3. Canadian Fog Light Installation help...

    Problems & Solutions RSX
    Hi, i bought this car used, and it came with broken fog lights (lens). Anywho, fast forward, i replaced the lens assembly with an aftermarket one, but the fog lights still don't work. Looking under the dash board, i notice that the way it was wired up is that, there are no single pin...
  4. P2647: Rocker Arm Oil Pressure Switch - Diagnostic and Installation Help

    Problems & Solutions RSX
    Hi all, First off, thanks for dropping in. I understand this problem seems to be quite common with RSX from reading these threads on this forum. I want to just say I am not a expert car enthusiast, just like my RSX and have been driving it since the very first day that I bought it in 2004...
  5. noob here; quick question about exhaust installation

    Bolt-On Basics: RSX (Base)
    hey there, just wondering how difficult is to install an exhaust, (looking at hks hi power) do i need to get it installed by a mechanic or could i do it myself? if i need a mechanic about how much do you think it would be? if i can do it myself are there any tutorials that would work? thanks lol
  6. [INFO] Honda K-Series Engine Bearing Identification, Installation

    Engine Building & Design
    This is from http://www.enginebuildermag.com Honda K-Series Engine Bearing Identification, Installation Honda uses a specific bearing selection process for both rod and main bearings. It includes using a chart along with the identified parts included in the engine being rebuilt. Connecting rod...
  7. Tein street advance installation booklet

    Suspension, Chassis & Brakes
    Does anyone have the manual came with the coilover? I lost mine and I am trying to find out the suggestion ride height in the Adjustment of Ride Height section. 20mm?
  8. Type s decklid installation

    Exterior Mods RSX
    I tried looking for info but I can't seem to find what I'm looking for. I have the type s decklid and I'm trying to install it. I was planning on bolting it on but have decided to use only 3m double sided tape. Now where exactly do you put the tape on? Do you put it in around the edge? Or in...
  9. New head unit installation questions

    Car Audio, Security, & Electronics RSX
    I bought a Kenwood Excelon DPX791BH head unit. I'm trying to use it with the factory sound system (Bose amp, speakers, sub), but I have some questions about the installation. I'd really like to use the (Kenwood) HU preamp outs, instead of adjusting line levels manually by ear. Questions: Is...
  10. Installation DIY Guide - Pulstar Spark Plugs

    Pulstar Spark Plugs
    Pulstar® Installation Instructions NOTICE: Pulstar® Spark Plugs are not pre-gapped for your vehicle. 1. GAP CAUTION: Do not apply pressure to the center electrode. Do not drop. Use vehicle manufacturer’s gap recommendation; not to exceed 0.055” (1.4 mm). For factory turbocharged or...
  11. Need a DIY Shifter Cable/Box Installation.

    The DIY Garage RSX
    How tedious is this task? Do you think I could DIY it without fucking shit up or should I just take it to a mechanic. (if so how much should it be)
  12. WTB Coilover Installation service ?

    Southern California For Sale: Local Pick-Up
    :wavey: Hey guys! I am currently looking for someone to install my new BC Racing Coilovers I have just bought. Located in Murrieta/Temecula (near Fallbrook and Lake Elsinore) Will pay if the price is right! Sadly, I don't have the necessities in order to install it myself! Please comment...
  13. Type-S Head Unit Installation - No sound

    Car Audio, Security, & Electronics RSX
    So today i've attempted to replace the stock head unit in my 04 rsx type-s (has bose sound system) with a Pioneer single din and a Scosche wiring harness, got all the colors matched and everything. Head unit turns on and works fine except for no sound at all. I've been browsing the internet for...
  14. Door Actuator Installation (Gold Rod Help)

    Problems & Solutions RSX
    I'm trying to replace the door actuator on the passenger side. I'm following the DIY that's on clubrsx but I'm completely stuck on removing the gold rod. It will not budge. It does not even look like it's meant to come out. :( Does anyone know how to get it out?
  15. Spoiler Installation

    Exterior Mods RSX
    Looking at a carbon fiber spoiler on RSX Store and was wondering how hard it would be to install onto my Base RSX. Another question I had was would the carbon wing look good unpainted or painted same color as my car (Blue) Thanks as always guys
  16. Help w/ replacement hatch installation

    Problems & Solutions RSX
    So my back hatch window got shattered on my 03 RSX and I ended up buying a whole new hatch w/ glass replacement... There's a couple ways I think I can remove the old one but they both are going to be a pain. Has anyone replaced there hatch that would be of some help in Maybe the best/(easiest...
  17. DIY A-Spec Sideskirt Hardware Creation & Installation

    The DIY Garage RSX
    This DIY is for people who are tired of hearing their bulky A-Spec sides rattle going down the freeway or for you that are paranoid someone will take your precious sideskirts with just a couple smacks. Not too sure but this can also be applicable for those who have replica sideskirts as well...
  18. SuperPro Castor increase bushing installation

    Suspension, Chassis & Brakes
    So I got my SuperPro bushings today and I'm not quite sure how to install them the "Front bush assembly" shows the orientation like I have it setup on the left. but the 2 pics I found of these installed (well one installed and one almost installed) had then arranged like I have on the right...
  19. Coilover Installation?

    The DIY Garage RSX
    I imagine that coilover installation is fairly straight forward and is the only extra thing that I need spring compressors or is there something else that im not thinking of?
  20. (First DIY) foglight installation video guide

    The DIY Garage RSX
    Here's my first DIY video on the yellow crsx foglights please check it out and let me know what you think. https://www.youtube.com/watch?v=YBh4wJP_EXQ
Top