Acura RSX, ILX and Honda EP3 Forum banner

installed

  1. Bolt-On Basics: RSX (Base)
    62A STREET MOTOR MOUNTS*** Not sure if there's already a thread up for this but hopefully someone can find some useful info with this. * please don't stare at the rust :eek: Only one other owner & it's winter driven annnnnnyways Helpful Links i used (DIY Motor mounts thread -...
  2. Bolt-On Basics: RSX Type-S
    Edit: See new posts, as I'll be posting more updates on different mods. 5/03 Acura A-spec suspension installed 5/18 Sent out for hondata reflash This thing is great! It's much quieter than the stock box when I want it to be (under 5000 rpm) and way throatier on full throttle at high rpm. Vtec...
  3. Car Audio, Security, & Electronics RSX
    Cracking / clicking sound all 4 speakers when car is on and volume is down. When volume is up you cannot hear the clicking. Clicking is consistently the same and does not change as the RPM changes. It has been 17 years since I installed last and by no means was I a pro, but this is the first...
  4. Car Audio, Security, & Electronics RSX
    I bought an 03 RSX a week ago and decided to install a new stereo since the one in it already would turn on and off randomly. Bought a cheap Boss one from Autozone and while installing it the power and ground wires from the cars end of the harness touched and sparked and made some smoke. The car...
  5. Suspension, Chassis & Brakes
    Thanks all for the recommendations in my previous thread. I went with the Powerstop brake kit from Amazon for an extremely reasonable price of $180 My mechanic put them on today - labor was around $200 to install them, which seemed pretty reasonable. Overall - I could not be happier. This...
  6. Bolt-On Basics: RSX Type-S
    Hey, everybody. I just want to know, I installed my RBC in my RSX Type S 2005, and I want to know if my car will run lean o rich and if that will be a problem. I have Skunk2 Alpha header, 3" exhaust, 3" Vibrant 1042, custom 3.5" intake. Sorry for bothering, thanks.
  7. Problems & Solutions RSX
    I just installed new civic 01-05 cmc and rsx csc, I have no pedal pressure and no oil in csc apparently. The csc is currently pulled out/not attached to frame of car (however the oil line is attached), its sitting lower than the reservoir, no oil comes out from the csc bleed screw with gravity...
  8. Bolt-On Basics: RSX (Base)
    Looks beautiful, easy to mount--cat back, but you can arely hear it, even at high rpm. Probably a good thing and I'll keep it, but what would be one that is slightly louder?
  9. Problems & Solutions RSX
    Any inputs on this. new clutch, cmc, and slave installed. car that has been parked on a hill in 1st gear with or with handbrake stays with no issues. After the install with all new clutch, cmc, and slave installed the car will roll back in 1st gear on the same hill that it had no issues for 2...
  10. Exterior Mods RSX
    I've been looking for this since 2011 but i ended up nothing. In fact, this particular Street type axleback from Spoon has been long discontinued esp for the DC5 chassis. I tried contacting Spoon Japan, Spoon Europe and even searching on ebay in Japan but they couldn't provide even a used one...
  11. Exterior Mods RSX
    Hi I thought I'd like to share what I recently modified on my 06 DC5 last month (May7th). Package came from Japan last month (May 2nd) You know its JDM legit (not China or Taiwan) if the newspapers are written in Japanese This was how my busted styro foam bumper beam looked like...
  12. Bolt-On Basics: RSX Type-S
    I installed my Injen cold air intake and now my radio won't won't how do I make it work again?
  13. Transmission EP3
    Hey guys haven't posted in a while, well last Nov I noticed my ep3 transmission was slipping , so I decided to not use it until I had enough $$ for a new clutch, I bought and Installed a RSX type S Action Clutch Stage 2 (6 puck) Kevlar sprung kit, I also bought a Chromoly lightweight flywheel...
  14. Bolt-On Basics: RSX Type-S
    There are two o2 sensors on the header. Does the defouler go on the primary or secondary? From my understanding it is suppose to go on the one closest to the exhaust which is the secondary. Thanks.
  15. Want To Buy or Trade RSX
    Let me know
  16. Car Audio, Security, & Electronics RSX
    Hey guys. I recently picked up a Pioneer AVH-X5700bhs and installed it with the stock Bose system. All worked out well. Now I installed a kicker amp and sub and there's no sound coming from the speakers at all unless I keep the bose amp plugged in. If I unplug the stock amp I'll have no sound...
  17. Problems & Solutions RSX
    After i installed my plm header my 1st and 2nd gear drop to 6k rpm normal but my 3rd gear drop to 5k rpm sometime 5.5 rpm. Anyone know what's going on? By the way I only had one o2 sensor plug in but not my secondary sensor.
  18. Problems & Solutions RSX
    Ok so I had a Alpine IVA-W505 deck installed. Worked fine. Installed Kenwood DNX6190HD deck (far far superior audio production) Ok so... Now I get feedback from the speakers. It's constant, when the car is on or on ACC. Volume makes no difference. It was louder when connected to negative...
  19. Car Audio, Security, & Electronics RSX
    Electronic and security bros, I installed a set of Hella supertones and followed every ones wiring diagram to the T. The horns work when pressing on the horn so i don't have a clue as to why the alarm does go off. unless the relay that was installed in some way disrupts the signal for the alarm...
  20. Southern California For Sale: Local Pick-Up
    Hello, Sold the car so these parts are up for grabs! Just have the cover left...pls take it off my hands �� OEM RSX CAR COVER - $130 now $100 its used but i never used it in good condition..this is now rare SOLD ThanksA-spec suspension - $400 now$350has abt 11k on it from...
Top