Acura RSX, ILX and Honda EP3 Forum banner

intake

  1. Intake manifold

    Problems & Solutions RSX
    Hey guys what's up I'm trying to remove the intake manifold on my 02 rsx type s but am having trouble getting to the bottom middle bolt as it is directly in the center and hard to reach from the top and impossible to get my hand through the side from as that is where the throttle body is and...
  2. K&N short ram intake opinion??

    Bolt-On Basics: RSX (Base)
    Hey guys, I’m new to having an rsx (its my first car lol) and I really want to get into it but dont have a ton of money. What type of intake would be better K&N or Injen?
  3. FS: Injen cold air intake

    Canada East: For Sale & Want to Buy
    Injen cold air intake for Acura RSX Type S colour is black. used but still works great. includes Injen washer fluid replacement bottle. $225 CAD.
  4. P0506 issue with new intake and throttle body

    Problems & Solutions RSX
    Hey! I have a completely stock 05 rsx type s, i bought and skunk2 intake,a k-tuned throttle body(without deleting sensor) and a k tuned fuel rail, whene ever i installed all the stuff the idle go low(like 500rpm) and have a misfire in all cylinders, i wanna know if i need a programmable ecu to...
  5. Injen Short ram intake

    Engine & Transmission RSX
    off of my 05 Type-s. Mint condition. Easily shows minimal use. Came with car when I purchased it. Going a different route. $160 shipped. nothing less. PayPal only as a gift or no sale. Ive been a victim of a PayPal claim scam and wont conduct under a business transaction ever again. Please feel...
  6. Intake & Header for 05 Type s

    Want To Buy or Trade RSX
    Looking for a good condition, quality header and true cold air intake (not a hot air intake) for my 05 Type S non turbo. Paypal ready. Must be shipped to 98607. Thx
  7. Looking for oem intake manifold

    Southern California For Sale: Local Pick-Up
    Looking for a working oem Rsx auto intake manifold the black one got cash in my hand
  8. Intake manifold and throttle body size

    Bolt-On Basics: RSX Type-S
    What would be the best size intake manifold and throttle body for 02 type s
  9. FS: Factory OEM Intake Box & Set of Springs

    Southern California For Sale: Local Pick-Up
    Have for sale my Factory Intake Box & Set of Front & Back Springs. Items were personally removed from my 03 Acura RSX Type S myself and I am the sole owner. Everything in pictures included. Filter still has lots of miles on it, just need screws for intake box. From what I recall, I removed the...
  10. K20a PRC Intake Manifold

    Engine & Transmission RSX
    Figured I’d see if anyone here had any desire to buy this? In great condition and a nice bolt on upgrade for a 02-04 RSX Type S. In the picture you’ll see the prc stamp. PayPal only if I’m shipping it! $150 SHIPPED (In US only)
  11. Wire harness under Intake

    Problems & Solutions RSX
    Hello All, Been a while since I been here, sold my car. Trying to help a friend, believe it or not a squirrel got into his engine bay and chewed out some wires. I have posted some pics. I am not sure what wire harness this is. can it be replaced or spliced back together ? its right below the...
  12. RBC Intake Mani

    Engine & Transmission RSX
    Looking for a cheap rbc. will trade or partial cash/trade for my prb (painted black) mani.
  13. Fujita cold air intake and OBX V2 header bundle

    Engine & Transmission RSX
    Fujita cold air intake with AEM dry flow filter. AEM dry flow filter few years old and recently cleaned. Comes with all hardware and hoses. Also Comptech Replica OBX V2 header no flex pipe, great fit, great sound and gains. Has primary and secondary O2 sensors Primary has less than 20k miles on...
  14. Stock air intake temperatures.

    Bolt-On Basics: RSX Type-S
    First things first: I bought the car (2003 Type S) completely stock and I'll try to keep it as stock as possible. BUT The intake air temperature bothers me a lot. I have a Scangauge II that I used in a lot of vehicles (mine or belonging to friends) and one thing I noticed is how much hotter...
  15. Wtb samco intake duct hose

    Want To Buy or Trade RSX
    HELLO CLUBRSX, im looking for an INTAKE DUCT HOSE made by the company called “SAMCO” any color is good. Thank you Or if you know anything to recommend that shapes likr the stock or angled like the stock. Thanks!
  16. WHAT IS THE BEST INTAKE. plz help

    Bolt-On Basics: RSX (Base)
    I know this thread is popular. I live in Bronx, New York. I want my car to sound so much deeper and better. I don't know which is the best intake to install. Can you guys tell me which works best for you and sounds the best. The weather here isn't so dry but neither wet. barley rains but can...
  17. Cold air Intake + Tune

    Bolt-On Basics: RSX (Base)
    So I installed my Injen CAI on my rsx, sounds nice, speed and torque is noticeable but obviously not drastic. Do people run tunes with CAI? I did a bit of research and some people don't run tunes but I want to fully take advantage of the CAI
  18. K&N Intake, K-Tuned Fuel Rail, P2R K24 Mount

    Engine & Transmission RSX
    K&N Short Ram Intake, type s, no dents in tubing, K&N Filter $125 shipped K-Tuned fuel rail and gauge combo, no hardware SOLD P2R K24 Mount, never installed $65 Shipped
  19. password jdm intake w/ battery relocation kit

    Engine & Transmission RSX
    250 shipped
  20. k24 intake manifold adapter

    Engine & Transmission RSX
    brand new
Top