Acura RSX, ILX and Honda EP3 Forum banner
joints

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 116 Results
Advanced
  1. Suspension & Brakes RSX
    Bought these right before my car was totaled brand new in box. Went with these because no need of modifying to fit like some other brands no clearance issues and sealed. $50 shipped
  2. Suspension & Brakes RSX
    Just uploaded on ebay for 100. Bought a set of BC extended ball joints and never installed them. I recently sold the car, so I have no need for them anymore, and just want a quick sale. i paid 150-200 for them, and then waited three months for buddy club to catch up to me and fill the order...
  3. Suspension, Chassis & Brakes
    Hello fellow rsx owners. My mechanic recently told me I need new ball joints (front lower) After doing some research I found some aftermarket from mevotech that they say fits 05-06 rsx (pn ms60508) these are only 30cad a piece cause its just the ball joint where as acura wants 300cad a piece...
  4. Car Audio & Electronics RSX
    Bought these brand new, never installed, to correct lower control arm angle after lowering the vehicle. Asking 160$ USD Shipped. PM is key. I haven't been on this site in a while but check iTrader, I was a very active member for years.
  5. Suspension, Chassis & Brakes
    I was wondering if the RCA Ball Joints from Hardrace will have clearance issues with the factory 02-04 Type S 16s? I don't want to install them and find out that the control arm will be rubbing the inside of my wheel. Anyone have this setup?
  6. Suspension, Chassis & Brakes
    Does anyone know if these will fit a 03 type s? I cant tell based on their description http://www.tunersports.com/buddy-club-p1-racing-extended-ball-joint-bc02-bjp1-h004_p18305.html
  7. Engine & Transmission RSX
    Cleaning out some of my stockpile to fund further projects. All parts are brand new OEM Honda unless otherwise stated. All parts are for an 02-04 RSX Type S. 43310-S84-A50 - Inner CV joint - $100 shipped 44014-S7A-950 - Outer CV joint complete with boot - $100 shipped...
  8. Suspension, Chassis & Brakes
    I searched through FAQs and Suspension but don't see much for amateurs. I bought an 03 Type S for daughter. It has 139k miles on it. My mechanic checked it out and said it was real clean - just needed a starter that was going (meshing sound on cold starts). The SRS light was on as well and...
  9. Problems & Solutions RSX
    I'm replacing the suspension on my 02 RSX. I needed to replace the front compliance bushings on the control arms and the ball joints. I brought the arms, knuckles, and parts to a local shop who ensured me it wouldn't be a big deal to press them out and in and would just charge the labor to do...
  10. Suspension, Chassis & Brakes
    hi, are typeS differences sizes from 02-04 to 05-06 ? are 05-06 bigger?
  11. Problems & Solutions RSX
    So i was doing an axle a while back and in the process i butchered a lower ball joint. So i went into acura asking for a replacement one and they say that they dont sell them seperately because theyre pressed into the knuckle. So i was wondering if anyone knew how i could get a hold of a set...
  12. Suspension, Chassis & Brakes
    What are my best options for lower ball joints on a 2005 Base model? I have searched and searched and yielded in mix answers. 1. Can I use a BB6 Prelude MEVOTECH Part # MK90469? The DIY that is available for the BB6 Prelude doesn't list parts number and which RSX it is used with. I know that...
  13. Suspension, Chassis & Brakes
    Anyone know if the 2002-2004 Type-S ball joints are the same as the ball joints on an 02 EP3?
  14. Suspension, Chassis & Brakes
    Hey gang, RSX DIY novice here. My 2005 RSX base model is at ~134k miles and Honda informed me approximately 6 months ago that I need new front passenger side compliance bushings. Honda quoted me 800 for the work, blech. Car has been driving extremely pretty rough recently (especially on...
  15. Problems & Solutions RSX
    So everytime i drive on my right side i hear a crazy vibration and a horrible noise as if my passenger side wheel is loose. I'm pretty sure its the ball joints inside due to the passenger wheel being tightened up. Now every time i drive the rattling gets worse. Especially when going on my right...
  16. Transmission & Drive Train RSX
    So everytime i drive on my right side i hear a crazy vibration and a horrible noise as if my passenger side wheel is loose. I'm pretty sure its the ball joints inside due to the passenger wheel being tightened up. Now every time i drive the rattling gets worse. Especially when going on my right...
  17. Suspension, Chassis & Brakes
    For those of you who have installed new ball joints, what are you guys using? AC Delco same quality as OEM?
  18. Suspension & Brakes RSX
    Have for sale some lower ball joints that fits only year 2005-2006. Will not fit 02-04 rsx. Looking to get $40 shipped for the pair.
  19. Problems & Solutions RSX
    I thought I would let everyone know that I found a company selling ball joints specifically made for our 05-06 rsx. Just had a shop install a pair yesterday and they work great!!! No more having to buy an entire knuckle assembly for over $150 each. :weeeeeeeeee...
1-19 of 116 Results
Top