k20a

Hello everyone, I am new to the forum so if this topic is already a dead horse I would appreciate it if anyone could point me in the right direction. Long story short, I bought an EP3 as a daily driver/winter beater because I wanted something reliable with a little bit of personality but also...

PLEASE CLOSE

Anyone selling Type R camshafts?

So my 03 type s threw a rod about 2 weeks ago and i was able to find a jdm k20a. The seller is telling me that if i swap my old intake manifold, exhaust, motor mounts and accessories, my stock ecu will run the motor just fine. Is this true?

Hay guys I have a 02 rsx type s and the engine seized and I need a new on I was looking at replacing it with a k20a because it I a lot less that a k20a2, will It work with the current ECU? they have the same cams do they not?

Had a mechanic put in an engine equivalent to my old k20a2 he bought a JDM k20a motor can't figure out all its issues now or even what this motor originally came out of if it's a true VTEC or base model 2 valve vs 3 valve here is pics of driver side below head stamps on engine block back stamp...

Looking for a 4.7 FD for K20a2. OEM preferred.

Hi there, i recently bought an RSX with a supposed JDM DC5 Type R swap. I wanted to confirm that it was because i read tons if conflicting info on clubrsx and hondatech. It has red valve cover, black dip stick, all those easy visuals. It is stamped k20a. The intake manifold is PRC which us...

So I got a Type s with a k20a and I blew the motor. Basically the block is seized. Since I don't have the money to buy a new type r, I wanna know what kind of options do I have with getting something a little cheaper. I was thinking about putting in a k24, everything is pretty much type r...

A few couple of years ago I blew an engine and bought a K20A for my 2004 RSX Base. Ive been having issues with the amount of air getting into the engine. Since the engine is from Japan, the "friends" that installed the new engine had to do a lot of swapping parts to get the car to run. Honestly...

A few couple of years ago I blew an engine and bought a K20A for my 2004 RSX Base. Ive been having issues with the amount of air getting into the engine. Since the engine is from Japan, the "friends" that installed the new engine had to do a lot of swapping parts to get the car to run. Honestly...

Hi, I'm looking for a JDM PRC K20A Short Block for my Spoon rebuild project in 2018. I'd prefer local. thanks

I recently bought a dc5 engine with 44k on it and swapped it ino my ep3, Plm header, 3" exhaust back off header, everything else stock, {ram intake that he removed during the test}, 208 hp is all we got with it on DynoJet , im wondering where to begin to at least get the 217 it came with? Im not...

Curious if anyone has one for sale (used in great undamaged condition). Will consider new too depending on cost. thank you.

I know this isn't a civic forum but this is where my home is (I still miss my '06 Type-S to death) so this is where I decided to post the question. Long story short the current K20Z3 is hydrolocked with bent rods and need to do a swap. Is the K20A a direct swap or do I need other parts to make...

Hi guys, How do you guys run water cooling lines from engine to turbo? Can I just T off the coolant hose from cylinder head the heater core, then another T from the heater core outlet before it joint back to the front of the engine? This photo should explain it a lot clearer what I wanted to do...

Hey guys, I'm new to this forum. I recently traded for a 2002 rsx type s with a k20a swap and was told it needed a new harness, I put the one that he gave me in and it wouldn't fire, after researching I found out it's the immobilizer that's causing it not to start and the k20a ecu doesn't have...

Sold.

if you have a $6000 budget for the engine then its the 195bhp JDM B18C (integra type-r ) all the way, although the k20a would be good aswell -- but will require more work, the b18 is relitavlely easy into 6th gen civics. the H22 arent as good and 2.2L will drink more feul, not to mention the...

SOLD!!! Selling a used JDM Spoon K20A 4-2 Exhaust Manifold & Matching 2-1 Downpipe The setup was purchased a number of years ago and doesn't have the Spoon logo plate badge on the manifold. The entire unit was ceramic coated when new, but it's starting to chip off in some areas. This is a...