Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 500 Results
  1. Problems & Solutions RSX
    I recently bought a type-S with a K24a2 swap in it and it had no power steering. I realized the old owner had swapped the serpentine belt for the power steering delete pulley so if anyone needs the info for the serpentine belt, here it is: i used a duralast multi V belt with the part number as...
  2. New Member Introduction RSX
    I am swapping out my blown K20a2 and switching over to a K24a2. I was wondering if anybodybhad any experience as far as the header goes. I have the plm race header that's org8nally ment for rsx k20 but will I be able to re use the same header for my new k24a2 or will I be forced to have to buy...
  3. New Member Introduction RSX
    hello and sorry if this has been answered across multiple threads. I did try my best to look and understand but want to be correct before I buy. I have a broken k20z1 engine in my 2006 RSX type s. What parts would I need to switch to a k24a vtec 3 lobe engine? I was referred to this engine from...
  4. New Member Introduction RSX
    Hey fellow fans, I’m just introducing myself and my 2005 Acura Rsx Type S and gonna start a post just to show my progress. As of yet I have installed a type r wing rep, and drilled holes in hood since motor was getting hot at on point, I painted the whole car jade green at a paint shop, I went...
  5. General Discussion EP3
    Hello everyone, I am new to the forum so if this topic is already a dead horse I would appreciate it if anyone could point me in the right direction. Long story short, I bought an EP3 as a daily driver/winter beater because I wanted something reliable with a little bit of personality but also...
  6. Problems & Solutions RSX
    Recently ive finished putting all the finishing touches on my k24a2 swapped rsx it has just about everything brand new replaced with everything oem. Its running hondata v4, ktuned kswap race headers, ktuned fuel rail, rdx injectors, skunk 2 intake manifold, power steering relocation kit, ktuned...
  7. Member Show-Off EP3
    Hey guys I’m doing a k24A swap from a tsx into my 02 type s but the throttle body from the tsx is electric and the one from the type s is originally a cable throttle body what’s the quickest and easiest solution to get My car running ASAP? Much appreciated
  8. The DIY Garage RSX
    I just bought an 06 RSX Type S that has a k24 swapped in. How would I go about getting an aftermarket intake? Will an intake for an rsx type s fit with the k24 engine? Are the throttle bodies of the k24 and k20 in the same spot and the same size ?
  9. General RSX Discussion
    Hey guys, I have a 05 Type S with K24A2 swap from 05 TSX. I have read already and searched regarding the matter. I know the timing and fuel is different and it will run lean. How lean would it run and is it dangerous for the engine? My question is: Can I drive my car around without KPro? I am...
  10. K-Series Swaps
    Hey guys I’m new to this, and the rsx so im Pretty lost on this one. I’ve got an 02 rsx type s which ofcoarse has a k20a2 and I need a new motor. I’m searching for a k20a2 but those seem to be of high demand so it’s hard to find a good condition one and a good priced one. I’ve seen others go to...
  11. K-Series Swaps
    So I'm in the process of a k24 swap into my type s long story short I'm not sure of the exact block or head but it's a jdm k24a vtec head so I bought it as a bare longblock so I'm using all accessories from the type s and also the ktuned intake adapter, ktuned upper coolant housing, my type s...
  12. The DIY Garage RSX
    Alright so I just bought a k24a4 with what the owner said had a bent valve , now im thinking of putting a k20 head on it but I'm 15 and I don't know what I'm doing. So it would mean alot if you guys could tell me some stuff to help me.
  13. Auto Talk
    I saw a 350Z shell on craigslist and it got me thinking of a K24 350z. Any thoughs on this or how much of would even be to pull something like that off?
  14. K-Series Swaps
    So I took my car to this shop to get the motor swapped to the TSX K24, i also has him throw on a skunk2 street series exhaust manifold. it’s been around 3 weeks and the guy at the shop is saying my car is ready to be picked up but that it bogs out under 2000 rpm due to it needing to be retuned...
  15. Turbo RSX
    I had my lower built and have the larger crank end so my type s oil pump gear and balancer won't fit. Some K24 are larger so what should I look for when ordering those parts?
  16. Engine & Transmission RSX
  17. All Motor RSX
    Hey guys, I am new here but I have a 2002 RSX-S with an 04 k24a2. I've changed my map sensor, tps, and o2 sensor but the car afr goes from 16 to 20. Ive also checked all my vacuum hoses (i am running an rbb intake manifold) and they are fine. Yes i have kpro Help Please!!!
  18. K-Series Swaps
    My engine is blown. Not sure specifically what is wrong. I am considering going k24/k20 build or Stock K20. Is the first option legal in CA? Ref? Smog? Also what is the price difference, between these two options? And what additional parts would be needed? I have a 2006 Rsx Type S. Thank...
  19. Engine & Transmission RSX
    Sold. Thanks fatso666
1-19 of 500 Results