Acura RSX, ILX and Honda EP3 Forum banner
1-20 of 213 Results
  1. ECU Tuning RSX
    Hello all, I've lost compression in a cylinder in my reflashed 02 base auto. I had plans to do a proper k24/6speed swap BUT I bought a new car instead (couldn't pass the deal up) and am house shopping right now, so funds are limited. I've read all over that the k24a1 is a direct bolt up to...
  2. Problems & Solutions RSX
    Just rebuilt a K24A1 with Arias 8.8:1 Pistons and eagle rods. Added a K20A2 oil pump. This is the third start-up as I work out the kinks, still have not driven, or revved. There is a lot of noise (almost banging) coming from the block. Does this sound normal?
  3. ECU Tuning RSX
    I just swapped in a K24A1 with forged internals and I previously had a K20A3 Turbo. I will be getting the car tuned as soon as its running, but I need to be able to drive down there (about 30 miles). Fuel system is the same; same 650 injectors. Same turbo as well. And I have KPro Question: Am...
  4. Engine Building & Design
    I am beginning to process of converting my EP3 A3 block to an A2. I will be keeping the A3 head. My EP-A3 has been turbo'd for nearly 10 years with around 300whp. As of late, I have been burning oil and compression has fallen off. 145 across all 4 (give or take). I have decided, since I have...
  5. Bolt-On Basics EP3
    Hey guys recently bought a rebuilt head for my a3 thinking it was an a3 head but it turns out it was a k24a1 head guess the company thought thats what i was asking for i have read on another forum that the k24a1 head is the exact same except it flows better and it is a direct bolt on with no...
  6. All Motor RSX
    Hey club Got my kswap tuned Parts K24a1 stock 9:6:1 bottom end K24a1 stock head K20z1 cams / vtec killers Rbc intake K20a2 throttle body 1320 heads with 3" straight pipe 650cc inj Are these numbers ok? 206hp 154tq Any input appreciated
  7. Engine & Transmission EP3
    Fresh k24a1 longblock Head valve job and resurface New head gasket New head bolts New timing chain and tensioner $750 obo
  8. Southern California For Sale: Local Pick-Up
  9. Turbo RSX
    Hey guys, looking for the best route for my water lines. Can you advice. Some guys are saying to weld bungs on the heater lines and call that a wrap while others are saying to tap the linea on the tb. I have deleted my iacv also. Please advise. If you have done this and can post pics also...
  10. Vehicles For Sale RSX
    wassup guys! so unfortunately the time has come for me to part with my original EP3. I decided to put my daily up for sale because i want something to haul the other ep with.. or just a bike or something. since i havejust picked up the crz i have 3 cars and just a 2 car garage. and dont like the...
  11. Canada West: For Sale & Want to Buy
    Seller must be paypal verified and willing to ship at MY expense :thumbsup:
  12. Canada East: For Sale & Want to Buy
    Looking for at least a K24a1 short block from a Paypal verified seller who's willing to ship. Thanks!
  13. Florida For Sale: Local Pick-Up
    Selling k24A1 head no valve cover from a CRV including intake manifold for 120$ Haltech Platinum Pro Standalone ECU worth $1400 everywhere...literally. $1000 firm from me. Proven superior to Kpro and AEM plus this is Florida...we don't have no emissions testing and shit like that :D so no...
  14. All Motor RSX
    hey i currently have a k24a1 swapped in my rsx. i am considering to do a vtec killer set up from a k20a2 my noob questions are could i use the stock rockers on the exhaust side on the k24a1 with the k20a2 exhaust cam? As for the intake side i have to use the k20a2 rockers and pins together...
  15. Engine & Transmission RSX
    Nothing is available, Decided to go ahead with the build.
  16. Engine & Transmission RSX
    Up for sale is my k24a1 crankshaft. It is the stock forged 99mm stroke crank. I Sent this crank down to Tennessee to "Crankshaft Specialists" and had it lightened, knife edged, check balls removed, polished and magnafluxed for cracks. This crank is a beautiful piece! Perfect alternative to a...
  17. Want To Buy or Trade RSX
    Looking for an 02-04 k20a3 or K24a1 harness from RSX or CRV, can be cut, so long as everything's included. PM me price shipped, to 38506. Thanks, -Nick
  18. Bolt-On Basics: RSX Type-S
    Hi guys! I was just wondering if it was possible to swap the IACV Valve from a CR-V to an RSX? I took both out and mine is completely done(barely turns any more) and the one from the k24a1 long block I bought is in very good shape! Here are some pictures, from the look of it the only...
  19. Engine Building & Design
    I bought a DC5R a while back with a k20a2 head and k24a1 block and I want to start modifying it, i'm looking into a sk2 oil pump to get 9000 RPM. Is it safe for a stock block to to those kind of rpms?
  20. Problems & Solutions RSX
    So I'm in the process of buying a 2004 JDM dc5, as it says the motor is a k20a2 with a k24a2 block the engine light is on and the owner says it's from lean mixture because he has a k24 block with a k20 computer and it only runs lean when it's in open loop. Could this be the reason why the engine...
1-20 of 213 Results