Search Results for ‘knuckle’

Picked up a 2006 RSX Type S that was wrecked on the front passenger side. Did some pretty good damage to the wheel and lower control arm. I decided to swap everything out on that side to be safe and have already swapped in a new subframe. The issue/questions I am running in to pertain to the...

Hey what’s up. Long story short sold my old car with itr brembo setup all around. Bought the car back with oem knuckles and lca. My question is...Is there anyway to tell if I have 02-04 or 05-06 knuckles. I need to replace a wheel bearing but I’m gonna replace the ball joints and control...

I need the communities help again. I have a fully type r brembo, knuckle, rotor and all the suspension on my car. I need new wheels bearings and dont know if I can use regular type S knuckle bearings or I need something else. Please if anyone has a part # or recommended a vehicle bearing...

Hey clubrsx, I'm having a tough time trying to remove the front hub (that's attached to the lug studs) off from the front spindle/knuckle. I am trying to replace my wheel bearings but cannot get anything to work. Both driver and passenger sides are seized. I already fudge the abs sensor plus...

hey im looking for a 05 or 06 rsx passenger side knuckle/spindle in good condition need it asap

Hey guys, I'd first like to introduce myself. My name's Phong from Toronto. I'm new here. Just got my rsx type s about two weeks ago from a private seller who put alot of upgrades into the car including a full out exhaust swap, intake manifold, CAI, etc.. I will post pics and share if you guys...

hi, i have 2004 rsx type-s, is it ok to interchange the spindle/knuckle whole assembly. i bought a spindle/knuckle, i believe it from a 2002 rsx because my suspension bolt could not go through the holes on the knuckle now my car is shaking. i just want to know if the spindle or knuckle from...

hi? please give me some ideas. i replaced my axle on the right side. now i cannot get the nut on the ball with the cutter pin. it spins . how can i stop it from spinning. it has a shallow grove under it but i cannot hold it with a screw driver. because the grove is not deep.

hi? I need a right front knuckle spindle. I have 2004 rsx type-s do you have this part please let me know I also need the trunk screen or cover

looking for 02-04 rsx base or 02-05 eps driver side knuckle pm price and location

I have a stock 04' with 150k miles still stock. What are the symptoms of failing EPS rack? vs moving ball joint in knuckle along side harsh noisy ride that sounds clanky over bumps? Was lowered on mugen ss for 3years and back to stock. I'm having suspension issues and I've changed a lot of parts...

as title states im looking for an 02-04 Type S Knuckle Just a bare Knuckle Thanks

looking for a right front knuckle for 05-06 type s. prefer in the 562 area but will meet if necessary. Please text me (562)305-6782

As the title states, my camber kit is seized and can't get it off so unfortunately I need to replace the knuckle. 05-06 Type-S. Part #: 52215-S6M-A50. Thanks in advance.

looking for strut with top hat+nuts to bolt down, spindle and knuckle front right hand suspension for the type s all shipped to 27612 Pm with pics and priced shipped and please tell me history of the car the parts belonged to..

seeing if anyone has a front passenger knuckle / spindle for 05/06 type s. prefer local but will pay for shipping. thanks.

2005 rsx type s driver side knuckle and lower control arm $100 each 2005 rsx type s passnger side knuckle $100 2005-2006 rear abs sensors $30 each 2005 rsx type s rear trailing arms $40 each 2005 rsx type s rear knuckles $50 each 02-06 front abs sensors $30 each 02-04 rear abs sensors $30 each...