Search Results for ‘ktuner’

I've tried searching and I can't find anything quite the same as my problem. I'm thinking vacuum leak, I tried looking for it with a bottle of starting fluid in the engine bay, nothing. But it's odd, it doesn't really idle roughly, it want to rev up and hold it. When I push in the clutch rpms...

Why does no one run anything besides Hondata and Ktuner (sometimes Haltech)? I'm currently in process of building a boosted K20Z1 in my 06 Acura RSX Type-S and I was just wondering why no one else in the community steps outside of these two ECUs. With the limited capabilities and STILL not...

Hi y'all! So I'm going to be doing custom bolt-ons on my car and I'm wanting to setup a ECU for it. As the title says I have a 2005 base auto and Hondata doesn't have KPro for my car so i'd have to get a jumper harness and a type s O2 sensor. Then there is Ktuner which does have compatible ECU...

Need it shipped to 90631 unless close by ready for pick up thanks!?

Hello everyone I’m looking for get a reflash for my ECU I would like to go with Ktuner but I’m not sure about a place here in California I could take it and they can do it for me, I really don’t know tunners and I don’t feel too comfortable sending my ECU somewhere, and if it’s like that I would...

Which one should I buy? I have a 06 rsx type s just swapped a k24a2 which one is better? Kpro seems like a hassle since I have to find a 02-04 ecu for it to work but is it really worth it? Only looking to daily the car and want it to run smooth with the k24 swap

Will this be compatible? I would rather buy it then a KPro because I want to just run a basemap rather then pay for a tune

I've been slowly piecing together my 05' RSX Type S for the last 3 years. Finally making good ground and want to ask before committing to a specific ECU. Plan to run an Innovate PSN-1 Nitrous/AFR gauge that has a bunch of neat fail safes built into it's programming which should help keep...

Anyone know where I can get ktuner ecu for 2005 Japanese dc5 type s (k20a3) Think it’s 3 lobe cams

Does the NZDM DC5 automatic Type S (05-06) use the same ECU as the American RSX type S (which only comes in manual), or the same ECU as the American base model RSX (which comes in manual and auto). I also don’t know if the New Zealand type s is a k20a2 or k20a3

So I have a 06 Type S and I am planning on buying Ktuner for my car. My goal is to have I/H/E and a tune that I can just upload to my car like an access port/laptop. Should I just buy the KTuner Revision 1 / 05-06 RSX Type-S PRB ECU Package? I want to be able have tunes to download for my bolt...

Good day looking for a ktuner ecu set up with or without adaptor harness. Lmk

I have a smog check due in middle of February. I currently have my Ktuner ECU in my car. I will need to swap out my Ktuner back to my OEM ECU before I do my smog check so I can pass. When would be a good time to swap to the OEM ECU before the test? I read somewhere that you need at least 100...

at HA Motorsports. Get 'em while they're hot

During searching for info on kpro and ktuner, I saw that the threads were years old. How are things now in 2017? Assuming youre building a turbo type s, have a great tuner guy who knows both systems, would you spend the extra $$ on kpro or is ktuner enough?

I am looking to run a water/methanol setup and wish to run the activation through Ktuner like many have done with Kpro using the E21 input and E22 output (Nitrous tab). I can not find a schematic what wires are used for the 6 programmable outputs that are available. Any input would be greatly...

hi does any1 have a cal for this that I can use? my car is bogging and dieing only when I hit the gas pedal or cruise on low rpms. but when I steadily press the gas it dosent die or stay about 3000 rpm. otherwise the car dies below 3000 rpm and don't wanna look like a retard reving 3500rpm...