Acura RSX, ILX and Honda EP3 Forum banner


  1. Launching+kpro+burnout

    Problems & Solutions RSX
    my question is if you use launch control how can you do a burnout if my launch control is keeping me from passing 3k.. im doing burnout outs at 5k or more
  2. need help launching

    General RSX Discussion
    I just bought a 05 rsx type s about a month ago, so i decided to mess around and launch the car for the first time.From what i heard its best to launch around 3k for a stock one night i just decided to launch the car after work since it was an open road.So when i rev to 3k and launch, i...
  3. Launching in 2nd gear?

    Turbo RSX
    Ok so I won't go into to many of the details about why I want to do this because it will make this post to long to read. Short story is for me once I leave the line I aleady have to shift into 2nd. I have anti-lag setup, launching with 5lbs at 5500. Has anyone ever tried launching in 2nd gear...
  4. Launching JRSC on street tires...What are your experiences and what seems to work?

    Supercharging RSX
    So...I didn't make it out to Sac Raceway this past Wednesday cause of baby mama drama...I will be out there for sure next question is what seems to be the sweet spot for launching 300+ hp on stock Michelin's and tire psi? My current psi is set @ 35 psi F and R ...I've been practicing...
  5. Launching advice from 5500RPM's to 6500RPMS's

    1/4 Drag Racing RSX
    So I ran a 13.7 if you see one of my other posts in this section. Now I want to go back and lauch the car higher. I'm riding on 17" stockies with Drag Radials. At 5500 RPMS I popped clutch and the tires hooked, however I was spinning in first gear. I was thinnnking should I try launching at...
  6. launching with kpro

    1/4 Drag Racing RSX
    im trying to get used to using the rev limiter to launch but i still cant really get the hang of it. i tested it out set to 3k. when im launching is the gas at WOT or just enough for it to bounce off the limiter ? (which isnt too much if its set to 3k rpms). also whats the most efficient way to...
  7. Damn i suck at launching lol plus my tires suck

    1/4 Drag Racing RSX
    any tips? i would have gotten slicks but the season ends next week so ill wait til next season heres my last two slips and a youtube vid, i think i need to purchase the front innovative, i have the other 3. wheel hop owns me, what should i do with my suspension to help with my launch. complete...
  8. !!launching !!!

    1/4 Drag Racing RSX
    im haveing some prob. launching and you only get so many runs in so what do you guys have good luck with!!!!:vtec:
  9. Launching turbo on slicks w/o anti-lag??

    1/4 Drag Racing RSX
    I'm planning on going to the track either tonight or next friday night (hopefully it wont rain tonight :thumbsdow ). Anyways, I have a k24/k20 frank w/ sc60, 3" DP, kpro, etc....putting down ~360whp and 305wtq on pump 93 @11lbs. I have some 15" rims running the M&H slicks (24.5x8.5) and last...
  10. Launching

    1/4 Drag Racing RSX
    :driving: i hear that for AWD cars...getting that short sqeak sounding is the best when peeling off. would that be good for our FWD cars? or..would it be faster if we peeled for like...2-3 seconds? i recently sqeaked my a start...i think it does give me a better start
  11. launching at rev limiter

    Bolt-On Basics: RSX (Base)
    Anyone ever launch at 5500rpms when the rev limiter is on ??? If so how good does it work ????
  12. launching with rev limiter on base

    1/4 Drag Racing RSX
    Anybody ever launch at 5500 rpms when the rev limiter is on ??? If so how good did it work ?
  13. launching with drag radials

    1/4 Drag Racing RSX
    when i launch with drag radials, quafie lsd what is a good rpm too launch at ... my redline is 9k and i can set my launch control with kpro ... i was thinking launch at 6k.... but with the dr's do u really gotta roast them or just slight burn out?
  14. A Launching Questions for the '05 owners

    1/4 Drag Racing RSX
    A few years ago I was at a track every week. Its been 2 years since Ive driven any car down the track, but i know when something is not normal. This car is rediculously hard to launch. Have any of the '05 owners had the CEL flash with a hard launch? Mine went off twice tonight.
  15. Launching

    Bolt-On Basics: RSX (Base)
    I have an 02 RSX Base 5spd. And i have a Ingalls Torque damper and was just wondering waht i should launch at or what do you guys launch at ?
  16. Rev Launching

    Bolt-On Basics: RSX (Base)
    Finally the engine of my base auto was broken in and i wanted to try to rev launch. So i begin to rev but it stops me at like 2.5k. It is really frustrating, is there some limiter on it, and if so why the hell is it soo low?
  17. Launching Turboed S With Street Tires?

    1/4 Drag Racing RSX
    Basically as title states.... For you turbo S's out there who have went to the track with street tires what is your method? 1. What RPM you lanching at? 2. Are you Feathering or Clutch Dropping?Or are you CLutch dropping and feathering the Gas? 3. What PSI are you Dropping your tires to for...
  18. launching in an auto rsx

    1/4 Drag Racing RSX
    so yeah i was reading about launching and stuff with an auto, and one of the techniques was to floor the brakes completely and keep ur right foot on the gas, and then launch at like 3k rpm. i was just curious about what the problem is with dropping the car in neutral and stepping on the gas til...
  19. Launching Hoosiers

    1/4 Drag Racing RSX
    Need some help here, went to Irwindale for the 1/8 to practice launching last night. I was running my DRs at 20psi. My best 60' was a 2.02 (Yielded a 8.8 @ 81). Seems to me there is room for improvement. I've been using the ebrake and doing a modest burnout in 1st (Just until I get a little...
  20. question on launching with hondata

    1/4 Drag Racing RSX
    without hondata i usually launch at 5000rpm with hondata should i launch that high? or lower? n with people with es mm with hondata what do you guys launch at?