Acura RSX, ILX and Honda EP3 Forum banner
limiter
1-16 of 71 Results
  1. The DIY Garage RSX
    I recently got a bee r rev limiter and was wondering if anyone has exact instructions or wiring diagrams for hooking this up. I have tried and I wasn’t able to get it working. Thanks
  2. ECU Tuning RSX
    So I’ve had my RSX Type-S about a year and I’ve noticed that when stopped at a dead standstill the rev limiter bounces at around 5k, I was curious if this was a stock thing or if I had some sort of aftermarket tuning done to my ECU. Sent from my iPhone using Tapatalk Pro
  3. ECU Tuning RSX
    Hey everyone, I'm experimenting with Kpro v4 and a I just uploaded a new calibration and I changed the tune from the k20a2 cold air to k20a2 with toda race header, intake and exhaust, I also added in launch control in attempt to get the two step at 5000 rpm. I changed the fuel and retard...
  4. Engine & Transmission RSX
    I have a pnd cam gear with the vtc limiter from tractuff stuff , pin is installed, 65 shipped usps priority mail
  5. The DIY Garage RSX
    Hi guys I'm new here from across the pond all the way from London, UK. I have an n/a tuned Japanese import DC5 Integra Type R. I've had the Bee*R limiter Type H2 shipped over from nengun performance japan a couple weeks ago specifically made for the DC5R but still havn't fitted it. Most of my...
  6. Transmission & Drive Train RSX
    So last night on my way home from work, I accelerated up to 55 in 3rd, but something weird happened after that. It happened so fast and i was panicking so I'm not exactly sure what happened, but I think when I pressed the clutch it kept revving up and was bouncing off the rev limiter in...
  7. Problems & Solutions RSX
    so i just had a "performance shop" do a motor swap for me. put a k24a4 (lack of funds) into an 02 rsx-s. for some reason the rev limiter is at 5500....sucking. every now and then i can engage the clutch while driving and rev it past 6k but not all the time. any help?
  8. Bolt-On Basics: RSX Type-S
    I just installed my dc sport header. I turned my car on and the rev limiter keeps jumping from idle to around 2500rpm constantly :/ Im not sure if its the o2 sensors or the intake( i have a CAI) or even the intake manifold. Of course my check engine light is on. I have a 04 RSX-S. Any suggestions?
  9. ECU Tuning EP3
    Okay I've been thinking, I'm looking to invest in a kpro. Because I have little control of myself on the highway hearing the Vtec scream from 3rd to 4th. I'm wondering...is there a way to set the kpro at a max speed limit of maybeee 72-73 mph to keep it on the safe side? I know it sounds stupid...
  10. Problems & Solutions RSX
    My '02 Type-S wont rev past ~5500 RPMs. Friend says it might be the TPS or somethings up with the ECU. TPS is like a 30 buck fix, not bad; hope it's not my ECU :noes: Whats up?
  11. Problems & Solutions RSX
    I was driving and then i rev matched and went from 6th to 3rd @ around 40mph and then i gave it some gas to cut someone off. Then all of a sudden my car starts revving on its own to 9000 rpm even after i had already put it in neutral. I pulled over and turned my car off and now i noticed that my...
  12. Suspension, Chassis & Brakes
    Someone recently told me that the stock and possibly ASPEC/ITR also have a nub on them that llimits the amount of camber to be gained with bolts. They also said its possible to grind this nub and gain more neg camber from bolts. Does anyone have info.about this? Maybe a link to a thread about...
  13. General RSX Discussion
    Ive searched and also posted at clubep3, but noone seems to know. Does the K20a3 in the ep3 have the rev limiter while standing still? I recently bought one and it doesnt seem to have one. I need to know if its normal or its possible I got a reflashed ecu.
  14. General Discussion EP3
    I searched everywhere but cant find the answer. Does the K20a3 in the si have the standing rev limiter like the k20a2 does? The reason Im asking is because I revd my si and it went to 7100rpm then I stopped. It kind of freaked me out. Wondering if this is normal or not.
  15. ECU Tuning RSX
    Has anyone encountered this problem?!? My car keeps hitting rev limiter at 5500 rpm. I go into Kmanager change overall rpm limit from 5500 to 8400 and upload it to the ecu, after it uploads i go to press datalog and it automatically changes back to 5500. Ive also tried testing it out by...
1-16 of 71 Results
Top