Search Results for ‘line’

I bought the ktuned power steering pump fitting for my 03. Does any1 know what fitting is needed to adapt off the rack? Is it 3/8npt?

Just noticed this plastic line attached to a bracket dangling from my undercarriage. Any ideas on what this could be?

Hey guys, I removed my fuel line purge filter a few months ago, but last night when i tried starting the car the engine would turn over but it just wouldnt start, When i checked the fuel regulator, i realised no gas was passing through the rail as it was showing zero PSI. I then screwed out the...

Since I just upgraded my turbo I was thinking of doing a return fuel line. So this is what I was thinking of doing: Existing line leave alone as the feed Run a new line for the return from the FPR Here is my question: I was thinking to drill a hole in the top of the gas tank right next to the...

Hey guys I’ve had a weird humming sound coming from my belt accessories. Well this morning the belt squeaked all the way to work so I popped my hood and saw that my main power steering line has fluid on it, my reservoir lost a 1/4 fluid so it’s a slow leak since I filled it up a couple of months...

I have a leak in the PS line at the point shown in the photo. Is it possible the whole line won't have to be replaced, or is that a guarantee? Any repair suggestions? '04 base model. Thanks!

whats this line for? removed and engine and labeled as much as i could but im not sure what this is for or if it can be deleted . and if it can be , how? its circled in red here are some photos,

Hey everyone. So I had a bit of a problem last weekend. I was upgrading my radiator fans when I heard some hissing sound and green dye everywhere. Found out my a/c line had touched the radiator and made a little hole and all my ac spewed out. I have no clue what this line is called but it's the...

Hey all, Owner of an 03 type s here. Love the car, but its been problem after problem with her. For some reason, even after completely overhauling every component in the clutch hydraulic system, I am still getting air bubbles every time I bleed it. What I've done: Replaced CMC w/ new OEM...

So, im trying to install my stainless brake line on the passenger side , but..as I loosened the "hard line" that attaches to the flex brake line hose, the thing wants to TWIST the whole line attached to the ABS.. is there a fix to this or do i NEED to buy a new hard line ? Thanks in advance.

New to the club and first RSX. I would like some tips of how replacing the power steering pressure line hose. Ive been looking for some information but nothing specific that could help me. Any tips of how to do it would be amazing. Its leaking a lot of oil and i need to replace it as soon as...

Hi, I'm about to replace my power steering high pressure line because it has a leak. I just wanted to know if it's any hard. I tried looking up on forums about it but there's not much info. If anyone can answer how to do it, that'd be great too. Thanks

Hey fam, I recently purchased this clutch line: http://www.ebay.com/itm/201022255496?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT it's all fine and dandy and cute but I must be getting something super wrong since while it does fit into the clutch slave cylinder, its not fitting...

For those of you that installed a ss braided clutch line did you guys install it with the oem fittings on such as in the first picture? or just bolted it straight up like in the second picture? Or it wouldn't matter with or without that adapter as seen in the first pic? I know that the banjo...

***sold***

Sup guys im finishing up my turbo type s and need some help with the vac lines. I have a vaccum block thats going to feed everything (turbo, bov ,wastegate etc.). Should i Tee off the pcv line between the intake manifold and ps?

Hi any1 have a diy install for the oil lines? For the turbo. Or a picture. Im planning on doing a diy install turbo kit but cant find the place where to put the oil lines. Pictures or explanation would help greatly please.

So I just swapped a 09 k20z3 in my RSX but the line that comes off the thermostat and goes into the firewall is different and when I hook up the rear hose I have to stretch it alot.. Has anyone had this problem or any solution? Thanks in advance