Acura RSX, ILX and Honda EP3 Forum banner
lines
1-16 of 370 Results
Advanced
  1. The DIY Garage RSX
    What's up guys! I'm living at Maryland now and work close to DC. I didn't need ac in Germany but the traffic here sucks soooo ac it's a must! I didn't want to use the stock lines because I'm going sidewinder with a 6262. I also didn't want to use the EP3 lines. Some welding had to be done but I...
  2. Suspension & Brakes RSX
    Type S Calipers and Stainless Steel Lines $125 Shipped K-Tuned LCA Rear, Installed and removed, Zero Miles $165 Shipped Mugen Style Strut Bars, front/rear Megan Racing C pillar Bar Would like to sell all 3 as a kit, could be cleaned and polished some $160 Shipped
  3. The DIY Garage RSX
    we did a reverse DIY on how to replace brake calipers, rotora, brake pads and stainless steel lines. we hopes this helps you guys and if you have any questions please feel free to ask https://youtu.be/ineHBj09VKQ here is a link to the DIY
  4. New Member Introduction RSX
    Love my new old whip!! Seriously the best looking vehicles ever made!!! I can’t wait to put my touch on this baby. I’ve been a truck guy. Drive a 2015 7” lift on 22x12s. Now I got the low life as well! Loving it. I am new to this tuner game, definitely looking for help with my new project. Any...
  5. Turbo RSX
    Hi guys, How do you guys run water cooling lines from engine to turbo? Can I just T off the coolant hose from cylinder head the heater core, then another T from the heater core outlet before it joint back to the front of the engine? This photo should explain it a lot clearer what I wanted to do...
  6. Want To Buy or Trade RSX
    anyone has these lmk. thanks
  7. Suspension, Chassis & Brakes
    i am redesigning my brake system so will be in need of custom hard lines or stainless ? the rears will be a long run so figured hard line for those? just need some input on who sells them or builds them?
  8. Southern California For Sale: Local Pick-Up
    Stoptech steel brakes lines for type s-50$ Type R wing-80$
  9. Suspension, Chassis & Brakes
    So I have a brake line leak on the passenger side. I ordered these stoptech lines to replace. http://www.jscspeed.com/catalog/Honda_Acura/02_06_RSX/Brakes/Stainless_Steel_Brake_Lines_for_02_06_Acura_RSX.html Was this a good idea? I know I have to find out the diameter of my brake lines. 06...
  10. Problems & Solutions EP3
    i have an ep3 and the ac lines are missing beside the one line that goes through the firewall.does anyone know if i can use rsx k20a3 lines or other si ac lines bc the ep3 lines r expensive i have found cheaper rsx lines please any help will help
  11. Suspension, Chassis & Brakes
    So continuing with my "New" RSX... im upto my extremely extremely rusted brakes rotors are so rusted they are actually chipping away the car was in a garage just sitting there for a year straight and wasnt driven. It was also in a very snowy area (Vermont) which caused further corrosion. im...
  12. Bolt-On Basics: RSX Type-S
    Please help I am trying to tuck or delete the two long lines running from the fire wall to the throttle body and intake manifold I know one is a Evap line but not sure what the other one is, was wondering if anyone has done this and or has pictures to help explain it to me!? I am also trying to...
  13. Problems & Solutions RSX
    I am looking to delete or tuck the two lines that are running from the firewall to the tb and intake manifold if anyone has a write up on how to do it or what needs to be done that would help tons! I am also looking to install a breather on my valve cover and delete the two violent hoses.. I...
  14. Turbo RSX
    Hey guys, looking for the best route for my water lines. Can you advice. Some guys are saying to weld bungs on the heater lines and call that a wrap while others are saying to tap the linea on the tb. I have deleted my iacv also. Please advise. If you have done this and can post pics also...
  15. Canada West: For Sale & Want to Buy
    Hey, Looking to sell a few parts I have lying around. Located in Vancouver. BNIB Hybrid Racing Fuel Rail and Fuel pressure gauge- $160 Greddy RS axle back for rsx type-s -$300 -comes with Titanium burnt tip, Stainless steel tip and silencer BNIB Techna-fit Clear Stainless Steel front and...
  16. Canada East: For Sale & Want to Buy
    As seen in pics. Looking for $120. Located in Mississauga Pics:
1-16 of 370 Results
Top