location

wanted to add in my reverse wire lead to my radio as I forgot to add it at the time of the installation of my rear view camera, so trying to find the easiest and closest lead there is to the radio location. saw people mentioning the wire is dark green with silver marks, some said it was under...

Hi Anyone know the correct dimensions/templates where to install the rear JDM Type R/Type S emblem? I know there was a thread made about it a very long time ago but I can’t find it. Thanks

Keeping track of your vehicle anywhere you are has never been easier with our user-friendly iPhone, iPad, and Android apps. Detailed drive history reports show everywhere your vehicle's been, and text alerts instantly keep you up-to-date.

My car does not have the "AMP' marked/indicated on either the interior or under hood fuse panels. Figured it was quicker to ask - searched for a few min. - no joy. What # is it & where? May also need the switching relay for the amp. I believe it is under the glove box? What type? No heated...

I would like to mount something stealthy so as to not attract attention if possible. I know the license plate mounting cameras are an easy mount but as soon as you see the license plate it will probably attract the low life's I am trying to avoid Any recommendations on the camera (brand /...

I'm currently looking for a place you mount the bcu or control module for my ep3 eps. Is it okay for it to be covered with carpet or does it need room to vent? Also does anyone have the female connecter for the white/blue wire? For constant power

I believe the downstream O2 location is suppose to be in the middle or the catalytic converter but previous owner did some Mickey Mouse shit and and put it after and I am wondering if that can cause my car to run rich?

Hello all, I've got a new ep3 that the previous owner turboed. I'm doing what i can to clean up some of the wiring. As you can see below he had the map sensor going right into the intake manifold. I'd like to move it back to the throttle body where the holes been plugged. Any pros or cons in...

Looking to install a toggle switch to bypass the parking brake safety on my touch screen head unit. I see a lot of potential places to put it but wanted to get other people's ideas before I started.

I need to do a compression test and need to disconnect them I don't know where it is located

Where is the fuel pump relay or fuel pump fuse located I need to do a compression test

Hello guys first post here so excuse my awfulness. So i was involved in an accident and it just so happened that a rock was there to ruin everything. Anyway said accident caused me to slide into a rock that smashed my bumper and went to dent my condensor. After trying to reattach my bumper (it...

Hello Everyone, Air/Fuel Ratio Relay* I have a 05 rsx type s with cel P0135 that doesn't want to leave! I've replaced my primary upstream O2 sensor with denso 234-9064. After replacing the O2 sensor the cel was still there. I made sure I took the terminals out for more than 30 mins. After...

Is the amp located under the passenger seat? If not what is there that can affect the speaker sound on the driver side and make the passenger side not work? Anytime the sear moves or something gets under there I loose my sound until I wiggle the wires under the seat or hit a bump. Please help.

well car came with fog lights and i know they worked, now the switch inside the car lights up(green little light) but fog lights do not turn on... im sure wires are good, and i cant really check the wires detailed its too cold !! lol so i want to try the fuse for the fog lights fisrt but i was...

I need some help i have read everywhere about where the map sensor should go and someplaces say it should go on the rbc manifold and other places say to keep it on the throttle body so i am unsure where to put the map sensor before i try anything else with it

So I got nowhere last time I asked this partially because I was not specific. I need help because I have a Rbc that I bought after someone only shaved it and they took off the MAP sensor mounts. So, where else can I put it? Some say 05-06 only require mani located MAP, some recommend all years...

I bought an 02 RSX Type S and it has a knock sensor code coming up (evap and 02 sensor as well). I searched around the forum and saw that it may have just been unplugged because the previous owner just had the clutch replaced and it came on after that. Jacked the car up, looked under the...

nvm

where can i get a k pro for my 02 type s in mn?:) i know there were some dealers in MN back then but i've been out of the aftermarket scene for a bit. so form what i see, kpro has dropped in price to 700? w my ecu? if i was to buy a existing ecu that has been kpro'ed..what would the cost be...