Acura RSX, ILX and Honda EP3 Forum banner
lowering
1-18 of 500 Results
Advanced
  1. Suspension, Chassis & Brakes
    Hey all, I just had a question about the rear end of my car. I have Function7 lowering arms and subframe with a Beaks tie bar. I attached some pictures and I really wanted it to show as it is in one of those pictures. For my car, it doesn’t show as much and I was wondering how I could get it to...
  2. Suspension, Chassis & Brakes
    So I got my wheels, mugen rear, visors, exhaust, SRI, and all I'm missing right now is that drop. Im looking for some lowering springs, that give a nice drop, and at the same time a nice ride. What springs would you recommend? Right now Im looking at Eibachs
  3. Bolt-On Basics: RSX Type-S
    Hey guys was wondering if you could give me some opinions and advice on coilovers and lowering springs. I have an 03 type s as my daily driver and was seeing which would be better and some good brands as well.
  4. New Member Introduction RSX
    Hey guys! So I have my type s as my daily driver. I was wondering what you guys suggest between lowering springs and coil overs as well as brands on both options. Let me know what you’re guys advice is, thanks.
  5. Suspension, Chassis & Brakes
    Hey, so I'm looking to get the skunk2 lowering springs, it's a got a 2.25" front drop. I had friend tell me to get a camber kit but would I still need it if I get an enlightenment done?
  6. Suspension, Chassis & Brakes
    Will installing lowering springs in an oem shock/strut cause bounce? I've seen several cars that were lowered but bounced when they hit bumps.
  7. Canada East: For Sale & Want to Buy
    The springs themselves have only been on the car for a year and a half and the struts were off the car for several years while I was running coilovers so they have less than 100k on them. These Megan lowering springs drop the car 2inches. No leaks, just went back to stock ride height...
  8. Suspension, Chassis & Brakes
    Has anybody on here ever ran with the Megan Racing lowering springs? If so what shocks did you use? OEM, Koni's, KYB, other, and what did you think of the ride quality compared to stock or coils? My suspension is worn out all round so I either need a set of coilovers, or springs + shocks. Going...
  9. Suspension & Brakes RSX
    All four struts are blown on my 02 type S and I'm looking to buy some lowering springs with stock struts in decent shape. Paying for automotive school right now so coils are out of the question. Camber kits are cheap enough.
  10. Suspension, Chassis & Brakes
    So I have a 02 type s and I am running a 17x9 with +25 offset. Just wondering if anyone had any suggestions on suspension to use. I have always been a spring type of guy but am a little weary that it might be to much of a drop but I don't want to have to role my fenders. any ideas on what to use...
  11. Want To Buy or Trade RSX
    So I refuse to put my wheels on until I get coilovers and unfortunately I'm a family man so car parts come last so coilovers are not in the near future so figured I'd look into some lowering springs. For shits n giggles, if you have coilovers for sale post up and give me a price, if they're...
  12. Suspension, Chassis & Brakes
    Hi , I am looking after lowering springs to buy but which one shall I get ? Have looked at Eibach sportline kit or skunk2 for maximum drop. I will buy Coilovers later but want it lower now.
  13. Canada East: For Sale & Want to Buy
    Hey all, I have the following for sale: 2002-2004 RSX type S Leather Seats - $old -Driver seat has a rip. Passenger seat is in MINT condition! Megan Racing C-Pillar Bar - $old OEM Suspension with Megan Racing Lowering Springs - $old
  14. Southern California For Sale: Local Pick-Up
    Megan Racing Lowering Springs w/ stock struts-$240 Stock Springs-$60 Hubcentric 25mm spacers 5X114.3-$100 Contact #323-508-7906 Couldn't attach all images so I can message the rest
  15. Suspension, Chassis & Brakes
    Hello guys My setup is 18x8.5 et45 225/40/18 and i wanna drop front 45mm (1.8inch) and rear 30mm 1.2inch anyone run this setup? Thanks for help
  16. All Motor RSX
    What do you guys have your VTEC engagement set to on your k24a2 RSX full swap ? Will it also be safe to go to 4800? I have mine set to the standard 6,000 but want to go to 4800 . Post your setups :)
  17. Southern California For Sale: Local Pick-Up
    Selling a set of 2002-2004 Skunk2 lowering springs with OEM shocks complete with top hats. Shocks are about done for & price reflects for that reason. They were on my car for about a year & was recently removed to upgraded to coilovers. I would say I put approximately 4k miles on them as I...
  18. Suspension & Brakes EP3
    Hey guys I have been reading around and it looks like lowering springs are frowned upon around here because of the rates. Problem is I have another car that I do time trials in (99 si) and I don't have a large budget for coilovers on the ep3. The hatch already has kyb agx shocks that it came...
1-18 of 500 Results
Top