Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 11 Results
  1. Forced Induction & Nitrous RSX
    Depending on what you are looking for I more or less have a 90% complete Lysholm TS conversion for the DC5 Jackson Racing Supercharger Manifold. The Lysholm blower is brand new, pulled it out of original packing, looked at it, and it sat for a long while :D Serious buyers pm me, we can work...
  2. Supercharging RSX
    This is also being made and currently waiting on the production line for fabrication for the first unit. Pricing will be determined soon. CPT Kirk (Andy) was the CAD designer on this one. Thanks Andy. It looks great! :thumbsup:
  3. Forced Induction & Nitrous RSX
    I picked up a Lysholm 1600AX this summer for a project with my Miata, but as it turns out I need to go to something even bigger. :) So, I have a brand new unit sitting around my garage looking for a new home. It looks like you guys have had some good success with the thing, so I thought I'd...
  4. Supercharging RSX
    Today I went to IMW to get the numbers from my latest developments on their Dyno Day. Great Event! Met A lot of nice people. I have reached 424HP and 301-304TQ with a slippin Clutch! :turtle: Setup: K20Z1 Entirely Stock Lysholm AX1600 Running at 17.psi Custom Aftercooled Jackson Racing...
  5. Supercharging RSX
    Goal for this build was to create a great daily driver that made 400ish whp. I have finally reached that goal. I wanted to make sure I ran a boost level that I would drive off the dyno and daily with and not for just peak results. So the goal was set and the time was needed to invest and figure...
  6. Supercharging RSX
    This past weekend, Jose finally made his way down here to finish his tune. This time around, he came in with a slightly smaller blower pulley, and I threw a set of Bosch 1,000cc injectors into the mix. Preliminary runs resulted in a good bit more torque on the low end, but something was...
  7. Supercharging RSX
    Well I went to T1 to get tuned and was very excited to see what the new blower put down. Just so all items are clear below are listed all the important mods to this build. Stock K20Z1 motor with A2 crank pulley Short Ram Intake (custom made for now until I can get CAI made to fit) Lysholm 1.6...
  8. Supercharging RSX
    Im not good at explaining my self but here is the factual info I have and possible problems when some of this technical charasteristics are not followed. Hope this is helpful as we move forward. _____________________________________________________ The charger is really sensitive to inlet...
  9. Supercharging RSX
    Had a customer in yesterday with a Cobalt SS on 20psi with the new Harrop 1320LSJ blower, aftercooled, with methanol injection come in for a dyno rental. Thought the results were kinda' cool. Here's a comparison vs. Jose's aftercooled Lysholm 1600AX RSX. SOLID LINE: Jose's TS K20Z1 @...
  10. Supercharging RSX
    For those who haven't been following Jose's (jmercado567) "Conversion to Twin Screw" thread, here is a link to the project: http://forums.clubrsx.com/showthread.php?t=626669 Here are some preliminary dyno results from today's testing: Jose and I learned the limits of RC 650's with a single...
1-10 of 11 Results
Top