Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 500 Results
  1. Problems & Solutions RSX
    Hi All, I'm in the process of replacing my catalytic converter on a 2005 Base Auto. When putting the new catalytic converter on, I noticed that the spring bolts shown in the picture below do not torque down. It appears that the thread(s) on the manifold are stripped. Questions: Am I supposed...
  2. Problems & Solutions RSX
    I have a 04 RSX Type-S, and I live in the midwest. It's driven in the winter, and has 241,000 miles. So the holes where the exhaust bolts to the manifold have pretty much disintegrated. I would buy a OEM exhaust manifold(18100-PRB-A01), but it seems that nobody sells them, or they are...
  3. Problems & Solutions RSX
    Hey guys what's up I'm trying to remove the intake manifold on my 02 rsx type s but am having trouble getting to the bottom middle bolt as it is directly in the center and hard to reach from the top and impossible to get my hand through the side from as that is where the throttle body is and...
  4. Southern California For Sale: Local Pick-Up
    Like title saids i have A Rbc manifold, Ready For polish I ended getting a different Manifold So i don’t need this One lmk
  5. Part Outs RSX
    Like title saids i have A Rbc manifold, Ready For polish I ended getting a different Manifold So i don’t need this One lmk
  6. Canada West: For Sale & Want to Buy
    Taking out my race header and need to put in the stock manifold and cat
  7. Southern California For Sale: Local Pick-Up
    Looking for a working oem Rsx auto intake manifold the black one got cash in my hand
  8. Bolt-On Basics: RSX Type-S
    What would be the best size intake manifold and throttle body for 02 type s
  9. Engine & Transmission RSX
    brand new
  10. Problems & Solutions RSX
    Does anyone have a good calibration/map for a 2006 Type S with RBC manifold and typical bolt ons? I have CAI and RH.. I am using the stock TB. I was quoted $500 to have the car tuned for the RBC, which imo is way too high.. If not, does anyone know a good e-tuner, or street tuner near...
  11. New Member Introduction RSX
    What is the name of the piece on the intake manifold it’s not the throttle body. 2002 rsx
  12. Forced Induction & Nitrous RSX
    Selling a used in great condition pml t3/44mm sidewinder manifold and 3in vband one piece downpipe...asking $500 shipped pm me for pics
  13. Southern California For Sale: Local Pick-Up
    does anyone have a RBC manifold cut or uncut
  14. Bolt-On Basics: RSX Type-S
    Anybody ever had a Skunk2 pro series manifold professionaly ported, like when they cut it open and weld it back together. Im planning on getting it done im just curious about the gains and improvements if any
  15. Turbo RSX
    So guys, I do plan on going FI in the future. But I have been reading/seeing a lot of things on youtube & in articles stating that the k20 engines benefit mostly from tubular manifolds. Yet everywhere I look, the ppl who have gone down the turbo path have the side winder manifold. I’ve only been...
  16. Problems & Solutions RSX
    Hi all, new to form. I had a Frank swap in my rsx(all motor setup) I decided to swap another Frank in there built for boost. This being my first time swapping a motor. Started in June. Near the end of swap and trying to reinstall intake manifold but I can’t really remember where coolant lines...
  17. Engine Building & Design
    been searching and haven't found the answer im looking for. going to build a n/a k24/k20 engine and doing research. im aiming for 280-300hp. will have build 4p P&P head and built block. my question is what intake manifold should i run. i current have a RBC not P&P but port match to 70mm on my...
  18. Northern California For Sale: Local Pick-Up
    For Sale plm race header $200 02-06 rsx type s Location Santa Rosa
  19. Engine & Transmission RSX
    RBC manifold - professionally cut by a machine shop for a K20 head (cost me $50 in labor), includes Hondata thermal IM gasket, P2R thermal throttle body gasket, Karcepts adapter, OEM support bracket, OEM vacuum hoses, and instructions/receipts. All parts were cleaned and de-greased after being...
  20. Canada East: For Sale & Want to Buy
    Looking to purchase a PRC Intake Manifold. Thanks.
1-20 of 500 Results