Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 22 Results
  1. Suspension, Chassis & Brakes
    Hello guys. So, before I place an order for a new set of aftermarket bushings. I would like some clarification. I went outside and took my calipers , measured the swaybar and it gave me a reading of 22.7 now. is the swaybar 23mm or am I to round down to 22mm? Also, being it's an...
  2. Problems & Solutions RSX
    Does anyone have an OEM 2002 RSX-S cat off the car? I need a measurement if possible. Looking to know the distance from the end of the ceramic cat material to the exit flange. Michael [email protected]
  3. Bolt-On Basics EP3
    hey guys.. quick question.. i need to know the gasket measurements for my HKS. if anyone knows please let me know Thanks!
  4. Wheels & Tires
    sorry for the noob question but im new to this....i have a 02 RSX type S and i wanted to put Volk racings te37 but i was wondering what offsets.....tire size....and etc to actually flush my car. thanks guys lmk.
  5. Lighting RSX
    Fog Light Depth Measurement, does anyone know how far authentic fog lights sit behind the bumper when they are installed, trying to fit IC piping somehow..
  6. Suspension, Chassis & Brakes
    i need help with how the conventions work in the helms what do the 12 and 1.25 mm stand for i the following image from helms i tried to search up conventions, couldn't find a definite answer...hate to start a new thread dono if its been covered. help is greatly appreciated
  7. Bolt-On Basics: RSX Type-S
    ok i am looking to get the amsoil replacement filter for my cai and i need to know what are the spec on the injen cai Dimensional Measurement form what i gather around it looks like this Base OD (in) : 6.000 Flange ID (in) : 3.000 Media Height (in) : 5.000 Top OD (in) : 5.0 do this seem...
  8. Wheels & Tires
    Hey guys, Before you guys tell me SEARCH, i tried searching all over this forum for the specific hubcentric ring size I need as well as the proper lugs I should use for these wheels. The wheels I plan to mount are manufactured by a brand called Fast Wheels and the model name is Inferno (model...
  9. Suspension, Chassis & Brakes
    Hi guys, If anyone has a stock 02-04 type S suspension laying around, I'd like the measurement for the rear shock eye bushing on the bottom of the strut. I'm looking for the width of the bushing. Basically the width of the steel sleeve the bolt rides in. I'd like the measurement to be as...
  10. Suspension, Chassis & Brakes
    Just measured the front and rear from the center of hub to the fender. Front 14" Rear 14.5" I have been rollin approx 25,000 miles on the A-Specs. I understand the stock height is 15" all around. Just wondering what your A-spec measurement is at.
  11. 123

    Wheels & Tires
    walk it out
  12. Suspension, Chassis & Brakes
    Suspension measurement request stock or mugen I'm doing some suspension work this weekend including raising the car up and installing new tie rod ends since my old ones are shot. I was wondering if someone could tell me the distance in inches from the center of their wheel to the fender...
  13. Suspension, Chassis & Brakes
    ok i still havent had the chance to install my new megans but when i do i will post the measurements i made to show the drop distance. but for now can anyone with megans post how much threads between the perches should show for a specific drop range or finger gap etc.. ? i think if we make...
  14. Exterior Mods RSX
    can everyone measure the height of their type-R replica, authentic, or a-spec wings and post up the #'s? the height from the top of the lid of your hatch to top of your wing..thanks. this sounds stupid but i just wanna see if mine is the same height. i always thought it looked shorter. mine...
  15. Turbo RSX
    Questions for those of you who have a turbo... Generally people say that 3 inch piping is the good application for turboed RSX>. thats one thing I know of.. But when it comes to find the inlet of the 3 inch.. I can't find the right one.. since the measurements are in mm(mili meter) So give me...
  16. Exterior Mods RSX
    Can someone please tell me what the exact measurement for the JDM type r sidemark light? I want to install one on my RSX. and do I need to drill a hole?
1-17 of 22 Results
Top