Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 281 Results
  1. Problems & Solutions RSX
    I recently put new coilovers on my rsx-s and a few days after I installed them I started hearing the metal ping/clunking noise while turning the steering wheel so I looked at my tie rods and the boots were really messed up and wiggling so I got full k tuned tie rods and I finally start to drive...
  2. Southern California For Sale: Local Pick-Up
    Black Hybrid Racing Fuel Rail Sold locally Modulo Integra door sills sold to AcuraRSX-S2006
  3. Problems & Solutions RSX
    So I just bought a Rsx and I removed the rear bumper and on the left side by the bumper some of the car peeled off and it won't sit flush I took a video can someone please tell me how to fix this I have a link to the video on YouTube
  4. Problems & Solutions RSX
    When im first gear let say im at 3000 rpm then let go the gas it makes rubbing metal kind of noise in the front right i believe. i try this over and over it happens but what i notice is that it goes away when i press in the clutch or let it roll neutral instead. So what i got out of it that the...
  5. Problems & Solutions RSX
    Hey so I've had this problem for awhile (like since wintertime), and it doesn't seem like it's really hurting anything since it's gone on so long and I haven't had anything break, but it's really annoying and I just want to figure out what's making the noise and get it fixed. It makes the noise...
  6. Engine & Transmission RSX
    Am selling New Odyssey Battery PC680 w/Metal Jacket And Brass SAE Auto Posts w/3/8 in. Internal Threads; comes with relocator bracket. $130.00 shipped with paypal fee included. pm me or email me @ [email protected] thanks
  7. Problems & Solutions RSX
    So I'm doing an oil change, I pull out my magnetic bolt and this is on the end of it. I think it may be from the rocker arm assembly but I'm not sure. Any ideas? Thanks.
  8. Problems & Solutions RSX
    Hey everyone, I heard a scraping noise from my car and was hoping someone could help me find the problem. I was hit on the passenger side around the fender/wheel area, took it to a shop and got the damages repaired. I noticed the noise in the video (metal scraping noise) when I turn my wheel...
  9. Problems & Solutions EP3
    Hey all, have a 2002 EP3 with 137,000kms/85,000mi. Last week I changed the oil to synthetic 5W30 (was previously on regular), did trans flush and got new spark plugs. I'm hearing a metal rattling noise at 1800 RPM. Best way I can describe the noise is, it's like in GTA V when your car is all...
  10. Problems & Solutions RSX
    Hi, I have this noise for a while when I kick the vtec. I had the manifold heat shield that was making noise, and finally repaired it, I thought that the vtec noise was the same source, but I guess not! RSX Type S 2005, all stock even the air filter! I'll make an appointment next week with...
  11. Southern California For Sale: Local Pick-Up
    Preferably off Enkei or Work wheels, Rays are fine too. I have a brand new blue enkei valve stems I can trade as long as yours are new/mint or I can buy yours. Located in 626 area
  12. Member Show-Off RSX
    Hey guys, I'm Brian :wavey: I've been lurking around on the forums here for a while now. I haven't really done too much to her yet, but I've got something a little different than most (flame suite on) so I decided its finally time for me to make a small intro thread. Car was purchased 1/17/12...
  13. Problems & Solutions RSX
    My front tires are rubbing on the inner metal of the fender I have no fender liner rubs hard and I can't even turn with out it scraping and cutting my tires I tired spacers and nothing I installed a full camber kit and nothing I have k sports coilovers Is my only option to raise it My wheels...
  14. Engine & Transmission RSX
    Part No. 17263-PND-000 STAY C, AIR CLEANER from a 2002 RSX Type-S $8 shipped in contiguous US
  15. Problems & Solutions RSX
    So I just bought an 03 RSX Type S from an older lady and there's a metal rattling noise whenever I accelerate around 2,000 to 3,300 rpms and I think it's because she was putting the wrong type of gas in it... How can I fix this??
  16. Southern Cali
    Snap On Tools Presents - Masters of Metal Tour Car Meet - Win Snap On Tools! FREE FOOD! WHEN October 29, 2013 Tuesday, TIME 5:30pm until 10:00pm WHERE 3525 West Carson Street #165 Torrance, Ca 90503 Snap On Tools will bring a party to South Bay car fanatics! At the end of this month...
1-17 of 281 Results