Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 17 Results
  1. Suspension, Chassis & Brakes
    Has anyone on here ever bought the Moog front lower control arm RK640287 or RK640288? Cause I currently have it installed but seems he Ball joint bushing is a tad bit bigger than oem and causing the ball joint to fall through so my question is what washer size are you guys using? thanks!
  2. Suspension, Chassis & Brakes
    Hey everyone. I don't have an RSX, but have an Element. I joined here way back looking for RSX wheels for my Element (which I got). I recently replaced my compliance bushings/lower control arm bushings with the MOOG K200799 units that are a spherical/ball joint style instead of the rubber. I...
  3. Suspension, Chassis & Brakes
    Just a heads up for anyone considering purchasing Moog products from Rock Auto (or any other vendor). I recently purchased 4 Moog end links from Rock Auto. What was received and what was pictured on their website were completely different. After some investigation, it appears Moog sells 3...
  4. Suspension, Chassis & Brakes
    Anyone ever tried or know anything about moog camber kit it says that it fits 03 type s. It's a good price so I hope their good. http://www.amazon.com/Moog-K90476-Camber-Adjusting-Bolt/dp/B000HPLUDO?ref_=pe_623860_70668520 http://www.amazon.com/gp/product/B000C545I6?ref_=pe_623860_70668520
  5. Suspension, Chassis & Brakes
    Found a decent deal of coilovers to replace my blown ones on my 02 t-s. Currently in the middle of a build otherwise i'd go bnib coilovers but life isn't that easy. With that being said the coilovers are going to be EP3 up front. I know i need EP3 tie rods, but which ones or which ones are...
  6. Problems & Solutions RSX
    So I bought a set of Moog Inner tie rods from rockauto and when I went to install them today they would not fit into the steering rack. There is a bolt that holds the steering rack in place in the way so it does not allow the tie rod to be inserted into the rack. Has anyone else had this...
  7. Suspension & Brakes EP3
    I just got my 06 RSX Type S rear sway bar and going to order the Moog end links along with it. Are these the right part numbers that I should look for? Thanks a lot. MOOG K750483 MOOG K750482
  8. Part Outs RSX
    I have stock 04 base struts and springs for the rsx. only thing is does not come with top hats. will have pics later. when i had my rsx, upgraded to coils so no longer needed these. nothing wrong with them im going for at 50 + shipping. MOOG Part # ES2382 longer tie rod 15$ + shipping
  9. Suspension & Brakes RSX
    I have stock 04 base struts and springs for the rsx. only thing is does not come with top hats. will have pics later. when i had my rsx, upgraded to coils so no longer needed these. nothing wrong with them im going for at 50 + shipping. MOOG Part # ES2382 longer tie rod 15$ + shipping
  10. Bolt-On Basics: RSX Type-S
    might be wrong the place, but I didn't see a suspension section. I'm looking to install my Raceland coilovers once they get here in a few days and have heard that some people need extended tie rods, and have referenced these as the go-to ends. Where can I buy them? Is it this guy...
  11. Suspension & Brakes EP3
    I just order low mileage ITR DC5R struts and springs And I was wondering what would be a better tie rod to go with? I figure moog would be a little better because it would have a grease fitting. Any insight would help Thanks!
  12. Suspension, Chassis & Brakes
    I was wonder if any one has used these. They don't have the grease packets the oem ones have but they were a lot cheaper...
  13. Mid West For Sale: Local Pick-Up
    Bought them since mines are shot, but ended up getting reverse tie rods, so selling these, things are like new! $50 for both, obo, let me know!
  14. Suspension, Chassis & Brakes
    I need new front balljoints. My shop reccomended that if i didnt want to go oem to only get moog brand ones. Acura make you buy the whole knuckle which im not sure is necessary. Im on buddyclub n+. Or is there another good aftermarket brand I can go with? Thanks
  15. Northern California For Sale: Local Pick-Up
    Selling a pair of front Moog camber bolts, picked it up on 07/18/09 from Vic Hub for $45, don't need these any more asking $25. also selling things which are sitting around Nintendo game unit with the Duck hunt and Mario game, get only wats in the pic. OFFER Bosch platinum 4+ spark plugs, all...
  16. Suspension & Brakes RSX
    I have a set of MOOG Endlinks. They are currently on my car. I ordered some Hotchkis endlinks but they wouldnt be here till the 5th and i got tired of the clunking noise. I have a receipt to prove that I just bought the MOOGs yesterday, so if anyone is interested. I will let them go at $60 OBO...
  17. Suspension & Brakes RSX
    Im selling my moog rear camber kit never installed them and sold the car. these fit ep3 and rsx chassis. paid $95each, Asking $100. for the pair! LMK i have paypal and will ship at buyers expense. Part# k90351
1-17 of 17 Results
Top