mounting

Anyone here install hid for the fog lights on their RSX? I have some Morimoto xb 35 for both headlamp and fog lights. I mounted the ballast for the fog lights by drilling a hole to the metal frame where the radiatior sit cause space is so limited..but there is a problem..it’s get wet from the...

I would like to mount something stealthy so as to not attract attention if possible. I know the license plate mounting cameras are an easy mount but as soon as you see the license plate it will probably attract the low life's I am trying to avoid Any recommendations on the camera (brand /...

Will be mounting an EQ if I can find a stealth location. Any ideas?

Can you use ep3 rail and slider to fit a nrg eat into the driver side?. or do I have to buy a special slider and bracket? just trying to save as much as possible

I'm currently looking for a place you mount the bcu or control module for my ep3 eps. Is it okay for it to be covered with carpet or does it need room to vent? Also does anyone have the female connecter for the white/blue wire? For constant power

If this is in the wrong section, sorry. I've been searching far and wide and I haven't found anything with pictures. I'm trying to find a way to mount the 02-04 rsx fog lights from the back and I haven't found anything with pictures. I found one thread but the pictures aren't shown on it. I'm...

Let me know price shipped.

Based on the sources all 1990 Acura/Honda use the same standard plug system. Is that true? Wanted these rather than splicing wires, but there are some conflicting reports so I am sure someone on here messed with these or similar ones before and can chime in before I take a chance...

close

So how has everyone mounted their mugen side skirts from auto source? Was thinking about trying to make a quick release for them if I do I'll post a d.i.y. just want to hear everyone's input and how they mounted them. Sent from AutoGuide.com Free App

Hey team I got a go pro and i am finally going to start playing with it. I was thinking about mounting it to the sunroof for a full cockpit view. It came with two mounts with double sided tape. I want to use one for the dash for sure and I was planning to buy the suction cup mount or the...

So I bought a double din touchscreen radio and everything works but the first dash kit I bought was pretty flimsy and didnt fit nicely, so I bought a metra one, and it fits great but it didn't come with the mounting brackets for the side of the radio, just the front faceplate piece with the hole...

Does anyone know the part # for this plastic mounting bracket on fender that secures the sides of the front bumper? or what its called? thanks!

I was driving to the Gas Station with my A/C on, driving normal until I hear like the hit something. Looked back, didn't hit anything, until my Power Steering when out then my battery inductor came on. Step outside all see the two bolts that hold the P/S snapped off. The belt is fine, and...

As title states, looking for the mounting hardware for the rear aspec lip for the 05-06 model. I've looked everywhere and called every dealer imaginable, but nobody can sell the hardware seperate. If anyone has some, or knows where to get some, pm me or text me @ 210-878-5631 Also, if anyone...

I've searched and didn't come across anything. I have ordered my Air Spencer (Squash :love:) just wondering where everyone has mounted theirs! I'm trying to think of a spot to mount mine that is out of the way

So I've always loved the look of the off center license plate. Used to just use a regular mounting bracket cemented to the bumper (or screwed into it like most do) on my integra. I never like the idea of screwing holes into something I may take off later so my question is does anyone have a...

So the story is, I bought an RSX brand new back in 2003, loved it, but hardly got to enjoy it before heading to Iraq. 2 months into the deployment and literally a couple days after paying it completely off I get a call from my mom telling me my little brother rolled it into a marsh. Awesome...

I am possibly picking up a Takata harness within the month. I have hooked up a Crow and a Sparco before, but how exactly do these eye bolts work? I plan on picking up a harness bar as well.

I'm looking to actually build my own carputer using a double-DIN chassis like this one here. It looks like the enclosure is about 8.4 inches deep, plus another inch or so for cabling to tuck away. I've had a Pioneer AVIC double-din receiver in here before, without issue. But I understand...