Search Results for ‘nut’

Was hoping to get advice on this problem. A while back while swapping sway bars i was wondering why the front sway bar bracket bolt wouldnt tighten. Turns out the nut inside in subframe somehow broke off and now theres no nut in there. I got it looked at and the mechanic said the only way to...

Just recently bought my 2006 rsx type s 98,000 miles on the clock, looking forward to the car and the community

Hi all, my passenger motor mount is broken so I bought a replacement for it. Only problem is there's a nut that won't budge at all. We tried a box wrench, pliers, ratchets, putting WD40 on it to loosen it up and I'm at a loss. If anyone has tips on getting this taken off I would greatly...

would this damage anything? what would happen in this scenario? I did the same for both struts but it seems only the left one makes a click noise when yanking the steering to the left. Im guessing since the nut was all the way down on the threads that this is way too tight once I back off the...

I've made this new post as of the O2 sensor problem. I found out that this thing: Is half of a sparkplug non fouler: This is what the half broken part looks like: Yellow: Broken in half Blue: Suppose to be the whole thing My question is how do I remove half of the sparkplug non fouler...

Hello, As title states I am in search of the washer/spacer that is inserted in the spherical bushing. Always put that cotter pin in people! Lol

I replaced both lower ball joint earlier and upon tightening the castle nut, it went past the cotter pin hole and squished the ball joint rubber boot. I can still turn the castle nut easily. Do I keep tightening until I can't anymore and then torque to spec?

Recently I posted about a clunking noise that turned out to be my passenger mount. Well the mount was under warranty so I was given a new one free from the dealership on the stipulation I bring the old one back Well I went to take off the passenger mount and the nut on the long upwards facing...

I once came across a link in a thread to a black locking nut for shift knobs, but now I can't seem to find the post in a search again. The only place I found this online was this one: http://www.kamispeed.com/product-p/jdh.dc5-in-skntr.htm?CartID=1 But it ends up being over $15 with shipping...

So I lost my lug nut lock key! Tried using an emergency lug nut remover tool I bought at auto zone but cannot find the correct size to fit my lock nut! I don't want to keep spending money on trying to get a new tool to try out. Anybody knows something that will guarantee will work?

Looking into getting these Project Kics Bull Lock Lug Nuts: http://www.kseriesparts.com/cr/MKN-W65119.html I was wondering if anyone knew if they fit the Enkei Rpf1? The item description doesn't say if they are for OEM or Aftermarket wheels. I did a little research because I havent really...

found one anyone have a top pass motor mount?

wtb high side AC line "runs from compressor to above across the motor top to nut, just need that portion of it thanks

I need help from you guys in GTA. I have lost my RAYS NUT KEY ( I believed its 27). I need to remove the lug locks for once, and I don't need to use it again coz I am not re-using the same lug nuts set. Can you have a extra Key to sell to me? Or someone can borrow the key to me for just for 5...

Sold....

Hello, I recently got my tires rotated at Mr. Tire (mistake), and it appears that they air-gunned them on. I assume this considering the factory OEM torque specs are 80lbs/ft and i was popping my wrench at 140+. SO I would like to get these off to do my bidness. I hear that WD40 is horrible to...

Does anybody know if the Password JDM lug nuts will fit on my 17" Type S rims? I'm not sure what size to get 1.25 or 1.5 and I can't seem to find a good answer online.

how hard would it be to replace the stud? possible DIY or not worthwhile with hard tools? i might have to take it in for this dumb thing and probably cost me an almost an arm too.

Just bought some 18x8 MB Battles in Gunmetal with 225/40-R18 Hankook V12 Evos. Went with something a little bigger and wider but nothing crazy for everyday driving. My question is what are the best choice of lug nuts to use with them? I want something that looks nice or matches the wheels...

I just got some XXR 526's for my 03 im looking for some lug nuts that lock any suggestions?