Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 72 Results
  1. Bolt-On Basics: RSX (Base)
    Just got my rsx it’s a base but want to know what I can do to make it more fun to drive Sent from my iPhone using Tapatalk
  2. Bolt-On Basics: RSX (Base)
    Hey guys I'm new here, recently came into a 02 base model 5 speed RSX. I traded up from my terribly slow NA is300 so for the time being the 5 speed is pretty peppy in comparison. I have a greddy turbo kit, but I'm not sure of the reliability of a boosted base RSX, that's not really a popular...
  3. Bolt-On Basics: RSX (Base)
    I'm new and I have a 2002 base rsx auto tranny and I want to get some things added to my car I need help knowing if it all will work together Rbc intake manifold w/ thermal gasket Pre modded 319$ Skunk 2 megapower r 70mm 533$ Injen Cai 227$ I'm getting my engine and transmission rebuilt...
  4. 1/4 Drag Racing RSX
    So Here we have my RSX has a bone stock k20z1 with a2 tranny No LSD Mods are as follow: Custom 3.5" CAI with velocity stack out the headlight 70mm skunk tb/RBC manifold Plm race header with 3" exhaust DW 800cc injectors/DW 256lhp fuel pump Tuned on e85 :D On OEM suspension Gutted rear...
  5. ECU Tuning RSX
    Hi, i am currently running a street tune on my 2006 rsx type s with the following mods, injen short ram intake, rbc intake manifold ported to 70mm, skunk2 70mm throttle body, hondata intake manifold thermal gasket, private label race header with test pipe, 2.5 inch exhaust. The street tune that...
  6. Bolt-On Basics: RSX Type-S
    Hey just curious how the combination of bigger injectors, RBC and Cams will affect the gas mileage of the k20a2 in the type s? anybody have first hand experience? does it help or hurt? Compared to a type s with just intake header and exhaust? I will have I/H/E/IM/DIC/kPRO
  7. Bolt-On Basics: RSX (Base)
    I do not have a bunch of money in this car. Actually I have $650 in it and I would like to add some mods that help with efficiency. My question is what gives you the most bang for the buck? I know the ebay chingy chongy parts are tempting but are they worth the aggravation and do they give you...
  8. Canada East: For Sale & Want to Buy
    Hey CRSX members, I recently converted my car back to stock. All the parts were installed at the same time and have been on the car for roughly 30k. The following are the parts I have for sale; 4) JDM Red valve cover, 6.5/10 condition, $150. 1) Injen CAI with windshield washer bottle...
  9. 1/4 Drag Racing RSX
    chassis : 03 civic si ep3 drive train : bone stock k20z1 swap exhaust: 05-06 rsx midpipe , 03 civic si ep3 muffler drag day 1: no bolt ons - best 1/4 mile time 15.15 drag day 2: bolt ons- rbc manifold, megan race header, short ram intale best 1/4 mile time 15.12 no noticeable...
  10. Bolt-On Basics: RSX Type-S
    chassis : 03 civic si ep3 drive train : bone stock k20z1 swap exhaust: 05-06 rsx midpipe , 03 civic si ep3 muffler drag day 1: no bolt ons - best 1/4 mile time 15.15 drag day 2: bolt ons- rbc manifold, megan race header, short ram intale best 1/4 mile time 15.12 no noticeable...
  11. Engine Building & Design
    Can anyone answer this? Im currently on a k20a2 with all boltons, is it possible to install a k24a2 with my k20 bolt ons no problem? Im ready to sell my k20 to a friend and just dumping a k24a2 from a 07 tsx on to my car and slapping on my bolt ons get it tuned? ( skunk2 alpha race header and...
  12. Bolt-On Basics: RSX Type-S
    Hey everyone im looking into upgrading my camshafts on my 04 rsx type s and i have no idea where to begin. My mods are injen cai,70mm exhaust,race header,rbc,kpro,stage 2 clutch,8lbs flywheel what stage would be safest and best to go with?
  13. All Motor RSX
    I've asked this type of question before I started my bolt-on upgrades, now I need some community opinions about what I should do next. Keep in mind, I'm still a newb in these things. I've asked my installer and he suggested for the money I should get supercharged, but I would rather pay less...
  14. Part Outs RSX
    Parting out some more stuff. Most of it is still on the car and i will get many more pictures as i get interest and time. Unfortunately I'm forced to remove everything outside in the freezing NY winter SO it may take me a little longer than I'd like. Anyway, I can at least start with a list of...
  15. General RSX Discussion
    willi lose power when installing cold air, headers, and exhausst? i already have a n1 exhaust with 2.5 piping and 4inch outlet planning on getting 421 headers and cold air next how will this affect my car?
  16. Engine & Transmission EP3
    http://www.ebay.com/itm/221054013315?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1413 Looking to trade my comp for some bolt ones...cold air intake, header, etc. Let me know what you have and see we if can work something out. eight five nine 308 two zero three eight. hit me up
  17. Southern California For Sale: Local Pick-Up
    sold sold sold
1-18 of 72 Results
Top