ordered

Hello, I'm considering to change final drive from 4.3 to 4.7 in my 2003 RSX-S. When changing FD, I should do transmission overhaul because mileage was over 120K and there is some mission noise at idle. I want to know which part should be ordered in your website. 1. overhaul parts There...

It says its 3m tape but its only sticky on one side The sticky side is a little spongy and the other is just red Can someone explain the purpose of this tape for me I thought it was supposed to be sticky on both sides to fill in the gap

I was going to post this in ECU tuning section but more of a customer service qualm. So I ordered K-pro sunday night and waited until today for my order status to process. Haven't received a comfirmation email from KSeries Parts with the needed documents yet, called several times and goes...

Can someone clarify this for me please:firemad: I assumed in the online honda / acura parts dealers, when you go to the exterior accessories, those lips , skirts, and wings were the A-Spec ones, hence why many are discontinued. My 03 arctic blue pearl already had the A-Spec lips/sides, I just...

Ordered some HFP supplies from cheaphondaparts.com I'm just wonder if anyone else has used this site?

so i own an 06 type s. i just ordered kpro with the option for them to send me an 02-04 ecu ready to go.. since im changing my ecu completely will my compustar remote start still work? im a lil worried about what problems i might run into.

Would they fit on my 02 Type S with no problems? Or will I need body work? Same goes for Tail lights.

for people with SRS code, do that paper clip reading trick, if you pull code 15-1, 15-2, or 15-3, take your car over to acura dealer and have them exchange it for free .. car must be from 2002-2006, less then 10 years old, and less then 150k miles only thing is i have 05-06 seats, hope they...

I have had an unfortunate experience with club rsx . I purchased an item on good friday the 22nd. The item is to be shipped to a US address although I reside in Canada (in order to avoid the high shipping cost to Canada). However CRSX will not allow you to use credit card or paypal to pay for...

ill be honest, this was the hardest decision I had to make in awhile. Go with some off brand kit like Xentec that all my buddies recommended or just dish out the cash for the retro solutions kit. Hopefully I made the right decisions which was mainly influenced by the positive customer service...

I have been trying to get in contact with them about this for over a year. The car has been down so I was in no direct hurry to get it going. Anyways I read somewhere they had some fail on some customers and a year later they are still back ordered. Should I stay away from them and just go...

I just bought kpro for my 05 S from a member on here. Came with o2 sensor and all. cool guy. Anyway I know a bit about tuning, watched alot of guys street tune and such just never actually done it myself. My engine has BC spec3 cat back, DCRH, Injen short ram, and RBC IM. I do plan on...

I ordered buddy club sf 17x8.5 35mm offset gunmetals Except the bolt pattern is 5x114 Will that fit? I just found out that the pattern is 5x114.3 !

Ok I've had the clutch in the car for a couple of months.. I ordered a stage 1 but I think I got a stage 3. Its an XTD ceramic and six puck. Now my problems is that the car is real jerky when backing up and while taking off from a stop. Is this normal? I know every few days, it grabs as smooth...

like the title says i just ordered my meth kit from rodney at ais n i got to say i love the customer service i ordered the stage one kit becuz i have to use the boost activated switch for the meth since the flashpro doesnt have nitrous control as of now. also added to the order is all...

Pic's Of what i have so far, waiting on the cwest bumper considering Password JDM tried to charge me full price for an authentic one and at the same time doing business with a replica company, so yeah they were going to charge me full price then send me a replica after i paid $810.00 after...

I had warranty taking out the tranny to do some seals so i went ahead and ordered the Clutchmasters Fx100 Stage 1 w/ Heavy Duty pressure plate. i only paid $415 shipped 2nd day air. Oem was is about 370 + taxes... Does anyone have a clutchmasters fx100 around here? i'm trying to get a feel...

Pictures to come... :pray:

replacing motor mounts , INNOVATIVE 60a Street INSTALLED & UPDATE with review!! pg 3 Hey all, just so you know, yes i've done a search, thats why i'm posting. I have recently been advised by my mechanic {my father :)} that i broke my Radiator Side & Front {pass side} Engine mounts during my...