Acura RSX, ILX and Honda EP3 Forum banner
p0341
1-20 of 61 Results
  1. Problems & Solutions RSX
    i recently did a timing chain and tensioner in my 2002 rsx type s this was my first big project on any car ive owner so theres plenty of room for error but ive gotten these codes after i finished and got the car running the P0336 came on immediately i took the car around my neighborhood to see...
  2. Problems & Solutions RSX
    Info: 2002 Type S w/ 170k miles. All stock besides intake. Was driving and noticed that my CEL came on. Wasn’t running weird or anything it kind of just popped on randomly. Stopped to get it checked and it was throwing two codes. They have to be related. It seemed to come on the day after I got...
  3. Bolt-On Basics: RSX (Base)
    my a3 has been boosted for over 25,000kms of dd use with no VTC issues at all it was just very sluggish in the top end like 5500 - limiter was painful so i decided to switch out the horrible 3 piece plastic intake manifold for a RBB 2 piece off the floor and put A2 cams with 2 sets of a3...
  4. Problems & Solutions RSX
    I have a 2006 RSX-S. I bought the car with the factory motor, which was all sorts of messed up from the previous owner continuing to run it even though is was overheating. I pulled that motor out, kept some of the bolt-ons, and I scrapped the rest of it. I found a complete disassembled K20A2...
  5. Problems & Solutions RSX
    Started the car yesterday morning to move the car up the driveway, was working fine. Fast forward to the afternoon, i go in and start the car, car sounds really rough then after 5-7 seconds it stalls and dies. CEL popped up and I ran the code, P0341. What could be the problem? Motor is healthy...
  6. Problems & Solutions RSX
    When I start my Type S up it idles high, like, almost 3k and when it starts to drop it'll start sputtering then level out after I give it a lil gas. When I try to take off in fussy great, if I don't keep the Rev to 3k it'll sputtering and buck pretty bad until I either release the gas and push...
  7. Problems & Solutions RSX
    When I start my Type S up it idles high, like, almost 3k and when it starts to drop it'll start sputtering then level out after I give it a lil gas. When I try to take off in fussy great, if I don't keep the Rev to 3k it'll sputtering and buck pretty bad until I either release the gas and push...
  8. Problems & Solutions RSX
    Okay so I need help, last year I had this code pop up and my car wasn't idling well at all. was diagnosed with a stretched timing chain, then told me to replace cam chain, guides and tensioner. A full year passes (car was stored didn't want to put money on it right away because I couldn't at...
  9. Problems & Solutions EP3
    So i replaced both cam sensor and im still getting p0341. Timing chain stretched? What about crank sensor? Your help is much appreciated. Car is 2002 with 227xxxkms (canadian eh!) not sure if previous owner already changed timing chain. Thanks in advance fam!
  10. Problems & Solutions RSX
    Hey guys, so I'm very happy with my rsx, and I recently took it to the track. It ran beautifuly the entire time. As soon as we got the car back to my place and took it off the tow truck, I turned it around and went to reverse it into my spot when I stalled it. Ever since, it shuts itself off...
  11. Problems & Solutions RSX
    Hello everyone! I have a k20a2 and i have a problem after upgrading my stock cam to aftermarket ip k2 cam. My car is throwing out the error code "p0341 variable valve timing control (vtc) phase gap". The car start up and running fine but the biggest issue is that my VTEC WILL NOT ENGAGING. The...
  12. Problems & Solutions RSX
    I have a high miles (213,000) 2003 type s. I have had it for a year now with no cel codes thrown. Car is completely stock and I keep the fluids in check weekly; it runs and drives great, very sporty feel like I would think its supposed to have. I did, recently, have to switch shops for oil...
  13. Problems & Solutions RSX
    I recently brought my 02 Type S to a shop to install two things - 1. New timing chain tensioner 2. Hondata intake manifold gasket I got the car back and the car now is not running right.. There are two codes that popped up - P0341 Camshaft sensor P1457 EVAP Leak Any thoughts? I'm thinking...
  14. Problems & Solutions RSX
    Starting up my RSX after rebuilding the engine at start-up I was recieving p0341, p1166, p1167, and p0141. Codes p1166 and 1167 were because of my upstream o2 sensor being bad as well as the wiring being off. P0141 was because the wiring for the downstream sensor was wrong. The worst code was...
  15. Problems & Solutions RSX
    {{EDIT(adding reference material;) The DTC P0341 (ECU Code) / CEL/MIL Here are some things that would have helped a lot in the beginning.... In case can't find the sensor; not recommending you change it. The P0341 troubleshooting flowchart does not ever say to, sensor change relates to other...
  16. Problems & Solutions RSX
    Just put in a k20/24 and got everything running and working then i get the code for the vtc phase gap. I pulled the valve cover and can see that the colored chain links are not in the same place as i initially put them when building the motor, but i cranked it so that cylinder one was at tdc and...
  17. Problems & Solutions RSX
    05 Type S, no mods. Currently have CEL had the code read at the parts store and it showed P0341 Camshaft Position (CMP) Sensor A Intermittent Interruption. I believe the sensors are good. The car goes into limp mode. Interesting part is that when the ECU is reset after up to operating temp...
  18. Engine Building & Design
    I did a kelford 179-A can install and got error code p0341. Thing is if timing was off car would not run good or have power. The car has way more power then it did before cam install & it starts right up no problems what so ever. It runs like a champ all the way up to 7200 and then it Boggs out...
  19. Problems & Solutions RSX
    I had my clutch give out on me a week ago and got it back but noticed that i had lost substantial power at both low rpm and obviously no vtec. Took it in to local mechanic and code p0341 came up. Mechanic tells me i need a vtc control valve and going to run me $650 install/parts. I have been...
  20. Problems & Solutions RSX
    Yesterday I changed the rear main seal on my 04 Type-S. I put it all back together and the mechanic who I was working with dropped it off of the jack and it landed on the engine. Nothing looked broken, so I figured it was fine. I tried to start it, and it squealed a little, sputtered, and died...
1-20 of 61 Results
Top