Search Results for ‘phase’

my a3 has been boosted for over 25,000kms of dd use with no VTC issues at all it was just very sluggish in the top end like 5500 - limiter was painful so i decided to switch out the horrible 3 piece plastic intake manifold for a RBB 2 piece off the floor and put A2 cams with 2 sets of a3...

This is my turd. Had it for about a year and a half. Exterior/Lighting: 05-06 Front end 05-06 Rear Mugen Lip Top 1 Winglets ITR Wing ITR Emblems Morimoto 6.0 Mini H1 projectors G37 Shrouds Flat black housings Retro-Solutions NightVision 6K HID kit Yellow Fog light kit 18x9.5 +10 Cosmis...

Just put in a k20/24 and got everything running and working then i get the code for the vtc phase gap. I pulled the valve cover and can see that the colored chain links are not in the same place as i initially put them when building the motor, but i cranked it so that cylinder one was at tdc and...

Selling my Phase Linear single din headunit that came out of my RSX. It's still working, I just replaced it because after 3yrs of owning the car, I couldn't stand the silver/green lighting. The dealer had it installed in the car before I got my car because the OEM unit was stolen. SOLD

I have a 2003 RSX Base with 125,000 miles on it. No mods completely stock. I have a CEL and its throwing codes P0341 and P0420. The CEL light turns off and on every other week or so... When its on the car runs sluggish.. when its off it runs normally. According to Autozone's scanner...

just got error code 57-3 on the kpro. Variable Valve Timing Phase Gap. so before i had the cams angled and tuned i had this code, now i have it again. a few days again i was driving and i heard a pretty loud bang noise and rpm lag before it picked up again. now i think i know whats going on but...

Selling this for a friend..it is this unit by itself, no box no nothing. Works perfectly, has been tested. 110 shipped. 90 picked up.

Selling this for a friend..it is this unit by itself, no box no nothing. Works perfectly, has been tested. 100 shipped. 80 picked up.

Moving on to a newer car most likely to get a 04-08 TL all part are on the car but will pulled off soon -Mugen Intake Box - $400 Pic comming soon -Toda Header + swaybar - $600 pending to speedguy07 Pic comming soon - Jdm Valve cover - $150 -Mugen Front strut bar - $150 Pic comming soon -Mugen...

Jensen/ Phase Linear In-dash Multimedia Player with ipod cable that charges at the same time remote control plastic still on LCD only issue is last month it stoped reading my CDs 150.00 obo call or text 305-733-2793 cash pick up only...

FS: Jensen/ Phase Linear In-dash Multimedia Player ipod cable that charges at the same time plus remote control. 7INCH PLASTIC STILL ON LCD:wavey: *only problem...it wont read my CD's $150.00 OBO cash pick up only! call or text 305-733-2793...

Final Part out! Swift DC5R sway bars: $400 originally Owner, Purchased at $600 for the pair Sway bars are in overall good condition, there are some small paint chips but no dent or anything like that. It will come complete with Swift HARD bushing!, original Swift Box, JDM packaging...

JustinC and I were talking about this other day and I realized I have no clue why this is. The question is: For those who use an adjustable exhaust gear, how does the ECU not throw a phase gap code when you advance or retard the exhaust cam with it? I think the ECU references cam position by...

I'll keep this short and sweet. Put in BC Stage 2 cams and after starting the car it pulled up the P0341 Code. Erik Loza of course thought that my timing is off but I pulled the valve cover today and I think that the timing is right. Plus I have been driving the car for awhile like this and it...

The bottom of the bumper has a complete crack right thru it but the owner says he was quoted at $200 to fix it. Otherwise from the pics he sent me it seems fine. This bumper is extremely rare and is 1k+ new. its also already painted ABP already, the same color as my car. The offer is...

Phase I: HOT Beeeaych Phase II: The Purchase Phase III: The Tint %30-%20 Future Phases coming mid June :deadhorse

Heres some pics of the mods I did a couple weeks ago. I also did a G2 paint job on the calipers and did the red out/black out trick to the tail lights. I got a pretty good shot of the exhaust. and yes..I raised the rear end since these shots. I now have a finger gap between the fender and...

Hey guys has anyone purchase their cwest lip kit from Phase Nine Industries? Their prices are cheaper than streetstyler~ if u bought from them b4, how's the fitment? thx!

does anyone actually have this kit and have anything to say about it? The main thing i want to know is does it require any modification like some replica kits do? Thanks alot, peace!!