Acura RSX, ILX and Honda EP3 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 48 Results
  1. Turbo RSX
    I ordered 2.5" charge pipes, but when I got them they measured 2.5" OD and 2.25 ID Is 2.25 ID enough to support 350whp on a T3/T4 turbo? These charge pipes are thick, 2mm thick, that's why it measures 2.5 on the outside and 2.25 on the inside.....
  2. Want To Buy or Trade RSX
    Just like the title says, looking for a complete set of greddy intercooler charge pipes. I know it's a long shot, but if you have them lmk! :fistbump:
  3. Bolt-On Basics: RSX Type-S
    So my car is extremely low and I currently have an apexi n1 exhaust . The piping doesn't scrape but the muffler does because it's so large. After I get my mugen rear lip I might have to hang the exhaust even lower, so I've been looking into deleting the muffler and replacing it with "blast...
  4. Southern California For Sale: Local Pick-Up
    i need WTB rsx resonator ! or mid pipes ! asap! pm me for more infor locate 92683
  5. Bolt-On Basics: RSX Type-S
    ok so i have a test pipe right now on my car its the megan racing wiht the resonator but there is a baffle broke in it that makes it rattle so i dont know if i should get the same one this time or another one here are the three im looking at. also if you know of any better or have one that you...
  6. Bolt-On Basics: RSX Type-S
    i was wondering, i just got my car and it has an exhaust leak, and ive heard around that buying a pipe pre-bent would be better than getting a crush bent. for the pre-bent known as mandrel bent, is better because it doesn't restricted air flow, ive talked to a couple of people about this and...
  7. Forced Induction & Nitrous RSX
    new it is the same as this kit: pm for price and pics
  8. Forced Induction & Nitrous RSX
    fits just like the one pictured pm for pics/price
  9. Forced Induction & Nitrous RSX
  10. Forced Induction & Nitrous RSX
    Hey guys im trying to sell my intercooler and change my setup a little bit this intercooler is amazing and it wont bother me to not sell it just seeing if anyone else love this thing as much as i do. The core of the intercooler came off of Geoff Racier's own personal civic from a while back and...
  11. Bolt-On Basics: RSX Type-S
    So my car's cat converter def needs to be replaced. ( I looked under my car and i see and hear it rattling cause someone prob bottomed out on my car and cracked it) So right now Im debating if I should get another CAT or a test pipe? I also noticed that some full race headers have a CAT delete...
  12. Bolt-On Basics: RSX Type-S
    i welded in a new flex pipe to my DCRH and it doesnt seem as loud as it use to be anymore? Just curiouse is there any way a new flex pipe could make a diffirence to sound of header? I didnt think it would or should but maybe im wrong?
  13. Engine & Transmission RSX
    I have a new (never used) o2 sensor defouler for sale. Price: $25 shipped. I also have (2) 3" exhaust pipes which can be used well for exhaust or to make a custom made intake. One was bent but not used and the other is still straight and new. Each measure 40" long. Price: $20 (each)...
  14. Northern Cali
    Who's running test pipes on there cars in SF?? I would say the whole bay area but I want to know specifically in the city since we have a crowded population in a small area, so the local PD can actually smell it. Have you guys ever gotten tickets or what not? I'm looking to either switch...
  15. Forced Induction & Nitrous RSX
    Need this gone, parts have 0 miles brand new purchased by me about a year ago, small scratch on one pipe from test fit, not visible when installed Comes with all couplers and clamps brand new 500 Shipped to your door + PPAL
  16. Forced Induction & Nitrous RSX
    Samco elbow (2" in / 2.5" out) J pipe (2.5" in / 2.5" out) (12) Straight couplers (2.5" in / 2.5" out) 145 degree coupler (2.5" in / 2.5" out) (3) flex couplers (2.5" in / 2.5" out) Big 90 degree coupler (2.5" in / 2.5" out) (3) 18" long aluminum pipes (2.5" in / 2.5" out) (3) 90...
  17. Engine & Transmission RSX
    Everything here is new... (1) 10" long flex pipe (3" in/out) (1) 12" long flex pipe (3" in/out) (1) 90 degree elbow (3" in/out) [mild steel] (1) 45 degree elbow (3" in/out) [mild steel] (1) 14.5" long polished stainless steel pipe (3" in/out) (1) 16" long polished stainless steel pipe (3"...
  18. Engine & Transmission RSX
    check my fs thread
1-20 of 48 Results