I have been searching like crazy online and on clubrsx, but with little or no success.
My goal is to run approximately 20 pounds of boost. I am already running at 12 pounds, but i want to upgrade my pistons first. After carefully reading, I have decided not to change the bore size, so...
I have a K20 Darton Sleeved Block with 87mm Wiseco pistons 11.7:1. One of the pistons bite the dust and the block needs to be bored .5 to 1mm in order to get it ready again. I found a good deal in some Supertech 87.5mm 12.5:1 K24 spec pistons. Reading some info I found that the compression will...
I am selling virtually brand new Pauter Rods and JE Pistons. Pistons are 9:0:1 compression.
These items have about 6 hours use. Unfortunately I spun a bearing and had to abandon my project. To that point, one of the rods will need to be machined out to remove the material where the bearing...
So i did try to search and came up with nothing somehow when i searched pistons.. Maybe there is a thread like the end all rbc thread but for pistons?
So im wondering, idk which way i want to go with my build.. Im almost done with bolt ons and i read that the tsx cams are good gains without...
Location: San Diego Ca
Description and prices as listed below----
Ideally i would be willing to sell the 11:1 Arias pistons and BC rods for $825 shipped but individual prices are listed below. Willing to negotiate slightly on price but no trades.
THIS STUFF IS ONLY COMPATIBLE WITH A K20, NOT A K24.
Hey guys, I've decided to go a different route with my build so I am no longer in need of these. Wiseco 86.5mm 12.5:1 CR +10.5cc dome pistons with armor glide, these are brand new and still in the packaging, comes with rings and everything...
Brand new Pistons. comes with piston rings. Bose size is 86mm these are 9:0:1 ratio.
Never used or installed
asking $300 OBO
call or text 519-404-eleven twenty
only could upload one picture. PM me for more
I have a set of CP pistons that are used and in good condition. These pistons are 87.5mm and have a compression ratio of 10.5:1. I bought these with intentions on building a high reving NA k20/k24 set up however that is not happening anymore.
87.5mm CP pistons - $125obo
Please text me for...
sup guys so i have some OEM TSX parts, not to sure on what they go for so i am open for some offers but please dont low ball.
i bought a tsx long block the was over heated. i cant tell u anymore info then that cause i my self dont know. but everything seemed to be ok when i was taking the...
Up for sale- Hasnt been used since built-
Built K24a2 VIN# JH4CL96936C018366 with
Ceramic Coated CP 11.5:1 87.5mm Pistons
Blueprint Ultralite I-Beam Rods
ACL Race Bearings
Balanced Rotating Assembly
Work done by a local reputable shop- Automotive Machine & Supply...
Selling a used set of CP Forged Pistons, 87.5 11.5:1 compression, pistons have about 40k on them, came out of my k24/20 build. Tried to clean them up best I could. Not sure what these would go for used. Any questions feel free to Pm or text me 845-206-3726 Please keep negative comments out...
Brand New Supertech P4-HK87-P4 Racing Pistons (Set of 4)
For Honda / Acura K24 Blocks with K20 Cylinder Head
Includes pistons, rings, wrist pins and locks
12.5:1 Compression Ratio
1.181" (30mm) C/D
50.7 Head CCs
4.5 Dome CCs
312 Gram Weight...
Skunk 2 A3 cams around 8k miles on them (only cams no gears) $350
Heavy duty ACT pressure plate about 8k miles also $150
JE pistons 11.5:1 89mm open box but brand new $500
Prices are slightly negotiable. Any questions just ask!
I have barely used 9:0:1 JE pistons and Pauter Rods for sale. They are for a K20.
I used the setup in my car for roughly 1 hour before I spun a bearing in one of the rods. I spoke to a machinist, and they estimated the repair cost to be between $75-$100. The bearing seat will need to be...
-For sale i have (4) k24a1 rods and pistons, boxed and ready to ship IMMEDIATELY. comes with rings and bearings, used obv. but in good condition.
- k24 oil pressure sensor
- k24 knock sensor
- k24 steel oil pan.
- k24 water pump and water pump housing
- k24 thermostat
- k24 timing chain