Acura RSX, ILX and Honda EP3 Forum banner
port
1-17 of 137 Results
Advanced
  1. Forced Induction & Nitrous RSX
    I have a newly ported ct supercharger, Stiegemeier port, Stiegemeier venom cooler, VitViper inlet, and Vitviper aftercooler. The supercharger has zero miles after it was ported. The VitViper pulley has been grinded to 2.8". Asking 3500 OBO Message me if interested.
  2. Forced Induction & Nitrous RSX
    Im selling my ct supercharger, it has been poerted by Stiegemeier. The kit will include ct supercharger VitViper Gen2 aftercooler, VitViper inlet (port matched to supercharger), VitViper 2.9 inch pulley (which is now a 2.7-2.8 Stiegemeier grip service). The supercharger has not been installed...
  3. The DIY Garage RSX
    Anyone ever see these two switches?? Not able to run scanner on ODB2 and just found these...
  4. Turbo RSX
    Can't get over 6 psi, I'm wondering what I did wrong. [/URL][/IMG]I drew a diagram of exactly how my lines are installed. Should I make another connection to my vacuum block aswell?
  5. Engine & Transmission RSX
    Kansas city, mo After a few more events this season I'll be tearing down my motor and Looking to sell my p&p K20a2 head. Ported and polished locally by new kid cylinder head, will include seats, guides, and valve seals, or also the entire valve train if interested. For those interested in...
  6. Engine & Transmission RSX
    The head is in immaculate condition Had 20k before sending to get ported Only missing spring and retainers and you're ready to make up to 290 on a k20 or 300+ with a k20 For the people that know k's 163 race port is as big as it gets No other head flows better than this Any 163 race port head...
  7. Problems & Solutions RSX
    I have a ported and cut RBC manifold. Im saving up for a 2006 K24a2. I know that since my RBC is cut, Im going to need the coolant bypass port. The bypass port runs about $125 with the 1/2 NPT to 5/8 barb fitting. Im trying to make this swap as inexpensive as possible. I have an extra...
  8. Engine & Transmission RSX
    Kansas city, mo Port and polished rbc with 74mm inlet and matching tb adapter. $450 shipped Skunk2 74mm throttle body and matching thermal gasket $300 $700 shipped together
  9. Problems & Solutions RSX
    Need to pass emissions soon Picked up my car 2 days ago from the shop. Stereo, OBD II port, remote lock/unlock does not work. The cluster gauges also acting weird. moves to 4k rpm and come back down after a few seconds and works fine. I thought it could be kpro, so I removed it and...
  10. The DIY Garage RSX
    Where does this Vacuum line go to?
  11. Problems & Solutions RSX
    Check the fuses and they where still fine. i was just cleaning the car and this shit just happen to me. so any one ever had a similar problem?
  12. Engine Building & Design
    I have k24/20 build it sleeved wit 13 compression. The head is stock for now wit stage 3 prayoonto thinking getting the stage 4. Its mostly track wit few weekend daily.. My question is what manifold is best for my setup at same time not lose power. Since im not rev past 9k and keep power in...
  13. The DIY Garage RSX
    Ive seen someone done it before on show off thread. And i want to keep my stock radio but i want to install an aux port myself so i can use my ipod. So if anyone knows how to do it, id greatly appreciate your help!!
  14. ECU Tuning RSX
    Hey guys, i have an 03 type s, my buddy just got an 07 si with a Cobb access port, will i be able to use the access port on my type s, or not. my assumption is not only because the newer civics are all computerized. ANYONE HAVE ANY IDEA! THANK YOU
  15. Car Audio, Security, & Electronics RSX
    A little something I've been working on. Main reason I did this is because I was tired of the store-bought POS adapters that got in the way, didn't keep up with my phone, and eventually fall apart. Total current capacity for both ports combined is about 3A, provided by a DC/DC converter...
  16. The DIY Garage RSX
    if i have a turbo set up with stage 3 cams valves springs and lower comp pistons ive been told it would be a good idea to port and polish my head. i know the basic proccess of porting and polishing but whould it really matter or is it a good idea. and i wouldnt really want to take my head off my...
  17. The DIY Garage RSX
    if i have a turbo set up with stage 3 cams valves springs and lower comp pistons ive been told it would be a good idea to port and polish my head. i know the basic proccess of porting and polishing but whould it really matter or is it a good idea. and i wouldnt really want to take my head off my...
1-17 of 137 Results
Top