Acura RSX, ILX and Honda EP3 Forum banner

position

  1. Problems & Solutions RSX
    I got a camshaft position sensor code and the engine is running poorly and stalling when I put the clutch in. I got the parts and replaced both of the camshaft position sensors and I still have the problem. Could it be that the timing chain is off?
  2. Problems & Solutions RSX
    My K24 RSX cut out on me about a week and a half ago. The belt sheered off partially and on the drive home it just shut off on me. The car would crank but wouldn't fire. trouble shooting the problem I found that the problem was the car had no spark. Next I looked at the crank sensor to see if...
  3. Problems & Solutions RSX
    So I previously had a P0340 code and have since replaced the camshaft position sensor and when I pulled the old one it had a piece taken out of it and looked a little melted so I replaced it hoping the sensor was the issue but when I put in the new sensor the code changed to the one I currently...
  4. Problems & Solutions RSX
    First of all, I did find a post with the same problem as I have but it didn`t give an answer. I sent a PM to the guy, but since he haven`t been active for a while I ask you guys. The problem is as follows: On my 02 RSX Type-S the front wiper only work on high, not on slow or intermediate/delay...
  5. Problems & Solutions RSX
    I was in the process of changing the starter in my girlfriends 2002 Acura RSX (base model). I thought I had everything off the intake manifold, but the TPS Sensor was still plugged in. I ended up ripping the wires out of the plug trying to take the manifold off. Does anyone have any idea what...
  6. Interior Mods RSX
    Just had a quick question: Im planning to pick up some pole position replica recaro seats, was wondering if these seats fit the rsx base? (The part that mounts onto the floor) Thank you!
  7. Problems & Solutions RSX
    Would like some input on what could probably be the cause of my issue. I recently purchased my 06 Type s and it had minor quarter panel collision that was fixed by the previous owner. My rear passenger wheel isnt quite centered, it sits like half an inch to an inch closer to the rear bumper. The...
  8. Problems & Solutions RSX
    So, had this car for 7 years, I'm way past caring about it as a "tuner", its a get me to work car, sorry guys, lost my lust for performance. Anyway, its been running rough for several months now, and me not caring about the car as much I've let it go. However the car has been increasingly...
  9. Problems & Solutions RSX
    need help. throwing a p0122 check engine code and cant find anything. it says throttle position sensor low circuit input. that means im not getting enough voltage through a wire. for all my electric heads out there i have checked my grounds and i am getting the correct 5 volts to the tps sensor...
  10. Problems & Solutions RSX
    Anyone have a picture of the wire harness that connects to the Intake Manifold Tuning position sensor or a wiring diagram? In my rush to get to the starter swapped for my sister I pulled a wiring harness. Got it back together but the harness only says Y, 12 and + . The colors of the wires...
  11. The DIY Garage RSX
    deleted
  12. Problems & Solutions RSX
    Guys I need some opinions. What could have gone bad? I am only able to lock/unlock my doors when my key is in the ON position. Key fob doesn't work either, I have 2 fobs and none of them is able to lock/unlock the door. This happened when installing aftermarket radio headunit. Headunit doesn't...
  13. Southern California For Sale: Local Pick-Up
    Selling my recaro bucket seat pole position great condition no rips/tears or cracks includes recaro side mount brackets this is just for the seat and the side mount, no rails/base 550 picked up
  14. Problems & Solutions RSX
    i was wondering if when replacing the crankshaft position sensor on a 02 rsx will any oil spill out? or would i need to drain the oil then replace the sensor? reason i ask is cause the sensor is next to the crank pulley and it makes sense oil would start shooting out of the hole when i get the...
  15. All Motor RSX
    Ive read mixed reviews on this topic. Building a k20/24 and am not sure which sensor to use, the tsx or the k20? I have my k20 on it now
  16. Problems & Solutions RSX
    I had my clutch give out on me a week ago and got it back but noticed that i had lost substantial power at both low rpm and obviously no vtec. Took it in to local mechanic and code p0341 came up. Mechanic tells me i need a vtc control valve and going to run me $650 install/parts. I have been...
  17. Engine & Transmission RSX
    i have a few k series cps in working order that i no longer need, $30 each shipped feel free to text for faster response. 801-837-8555.
  18. General RSX Discussion
    Hey guys. Got a question. So, I plugged my ECU (stock K20A2) into my laptop and did some data logging. Pretty cool stuff, but I tested out the throttle position because I noticed that at the minimum it is 9%, not any lower. So then at maximum throttle position it only goes to 90.8%. I seem to be...
  19. Problems & Solutions RSX
    Like the title said. my old tranny: 05 Type-S 6 speed in NEUTRAL POSITION.. Shift stick in NEUTRAL POSITION Bought Tranny: 06 Type-S 6 speed- tranny position is UNKNOWN. How do you change gear when the tranny is not in the car?? I bought a used transmission but don't know what gear is it in...
  20. Want To Buy or Trade RSX
    recently by timing belt ripped my cord out of the plug/connector to the crankshaft position sensor. all i need is a new connector from a junk harness and ill be set. I'm willing to pay for this connector due to my 02 RSX still running in limp mode. iIt s also identical to the map sensor connector.
Top