powder

SOLD! For sale is my 23mm Eibach rear sway bar that was professionally powder coated bright red by Paul at Columbus Powder Coat. The Eibach specific bushings are included in the sale. This bar was purchased new in 2015 and I have only 2,000 miles on this bar total! I removed it from...

Sold! For sale is my set of DC5 Type R aluminum front lower arms that I polished and then had Paul at Columbus Powder coat professionally powder coat clear. The powder coat will protect the polished finish and provides a nice glossy finish. I installed HardRace harden rubber bushings (part...

For sale are my DC5 Type R front knuckles. I pressed out the hubs, shot wheel bearings, and worn ball joints. These items were sand blasted and then professionally powder coated by Paul at Columbus Powder Coat. I am selling my RSX and no longer have use for these items. I am listing...

SOLD For sale are my RSX type S rear knuckles that I removed the old worn bushings, stripped oxidation and then sent out to be professionally powder coated gloss black. The rear brake dust shields were also powder coated at the same time and will be included in the sale These items have...

I'm looking for quality powder coating at a reasonable price does anyone know anywhere in the Long Island area prefferably but anywhere in newyork I'm interested

Sold. Mods please delete.

I have a set of Rpf1's that I purchased brand new for $1000 in the spring. I had them powder coated purple at Powder Keg located in MN. Their work is in the Midwest FS section for those who wants to powder coat their wheels. It has a 2 stage with gloss which I paid $580 for. Tires were also...

JLines SDMRL Front: 18x8 Rear: 18x9 Tires: 215/35ZR18 Hankook ventus v4es brand new Cali trade only Contact for quick response (909) 556-4621 Up for trade or sale, make offers. Traded my mac rollaway for them and bought tires, haven't drove my car. It was purchase from a s2000 owner. Will...

Specs: 17x10 et22 all around 5x114.3 only, not universal 215/45/17 Nankang 80% 215/45/17 Accelera 30% flipped camber wear Wheels were coated June 3. Location/price: Oxnard, CA Contact 7025758513 $800 firm. Please no trades. I would give the wheels an average rate of 8.9/10. Thank you.

Anybody know a good place to get my rims powder coated? Fast turn around time and not so expensive . prefer los Angeles area ..or somewhere near it willing to drive though..

Tl wheels 17x8 +48 with very good set of federals 215/40 front 215/45 rear Powder coated white Looking to trade for some 17x9 +22 rpf1's plush cash on my end of course Wheel 1 Wheel 2 Wheel 3 Wheel 4 These will need at least +3 mm spacers to clear the rear trailing arm

Jordan retro 1 powder blue 90$ obo hmu for pics and more info 9516627186

As the title says, Selling a RBC Mani, Cut, Shaved and powder coated. Installed for 1 month since powder coating. The karcepts adapter is powder coated also. 350.00 for both, Powder coating was 150.00 alone.

S O L D This color Is not wrinkle black it has less wrinkle kinda like a plasti dip texture Never mounted since it got coated 3 small spots where the powder chiped of but with coil cover u can't see it Call or text if u need better pics 267 306 7998

Fresh Power coating from GP3 Racing. Hot tanked. Striped and Coated. Gloss wrinkle Red coated valve cover for K series engines. Will fit late model Honda Civic SI, Integra, Accord, Acura RSX, TSX, and others. BRAND NEW CONDITION shoot me a txt or send me a pm. will trade for 3"...

Want to sellin this bad boys testin waters 17". 7.5. 2 225/40/17 %30 rear. 205/40/17 %80 shoot me an offer. Hit me up for more info 714- 813-0023

Not sure if this is the right sub forum to post this in, but mods move if need to be. I searched Google for the answer, but everything was very vague. Question is I have a set of Gram Lights 57D wheels that I want to get powder coated, but I read that some wheels cannot be powder coated...

Anyone know a good place to powdercoat my wheels down in san diego? Thanks!

Hey guys I am selling my Work VSXX 19' rims. I just had them re-powder coated, and just spent a grand on tires for them. Before I had a chance to put them on my car, I totaled it. The rims are 19x8.0 in the front and 19x8.5 on the back. I just had brand new Yokohama Advid ENVigors (225/45r-19)...

I have two metallic blue valve covers. They have two -10 AN bungs for vent. Both valve covers have a little of highs and lows of the metallic but overall look great. OEM breather vent is welded and shaved as well as Honda logo. I will sell each VC for $250.00 shipped