Acura RSX, ILX and Honda EP3 Forum banner

progress

  1. Suspension & Brakes RSX
    For sale is a REAR 24mm 02-06 Acura RSX/ 02-03 Civic Si adjustable Progress Sway Bar/Anti Roll Bar with endlinks and poly bushings. Bar is in great condition. NO bends, NO issues, NO rust. As you can see the adjustable end links are a little rusty. Includes: sway bar, both bushings, both...
  2. Member Show-Off RSX
    Alright lads, it's time to immortalize my pile of junk before I die. Parts List: I picked this up back in 2013 a few months before grad. Snowed the next day in April so I couldn't even clean it up properly. It had 98,000km when I picked it up and it's up to 116,000km now. It was a re-build...
  3. Suspension, Chassis & Brakes
    I didn't realize the progress bar used adjustable end links when I bought the hardrace OEM links last year. Will these install correctly or cause anything crazy as far as the vehicle dynamics go I should know?
  4. Suspension, Chassis & Brakes
    I have a Progress 24mm rear sway. Previous owner installed, didn't know it had spherical end links, and I already bought the hardrace OEM links. Just curious what my options are here? If I need to run sphericals, or if I could run the Hardrace ones and if I do what are the effects of that...
  5. Member Show-Off RSX
    Hey guys. As the name implies, at the time of writing this is more of a "progress thread" as my car is definitely nothing special at all, however Ive been looking for a way to document its progression and who knows, maybe one day it will amount to something. Having purchased the car back in...
  6. Problems & Solutions RSX
    For those of you that have personal experience with progress coilovers: I checked a bunch of threads but none answered specifically - I have installed the coils, but yet to torque everything and lower the car back down. The rear setup has no tension on the spring, and it just moves around...
  7. Southern California For Sale: Local Pick-Up
    sold!
  8. Member Show-Off RSX
    hey guys wanna show off my type s and also just wanna know what should be my next step for cosmetics as well as performance, list of mods are as follows exterior: 05-06 front rear conversion cosmis racing xt206R 18's type r wing p26 mitsubishi rally red custom paint a-spec rear bumper and...
  9. Forum Threads
    hey guys wanna show off my type s and also just wanna know what should be my next step for cosmetics as well as performance:hb:, list of mods are as follows exterior: 05-06 front rear conversion cosmis racing xt206R 18's type r wing p26 mitsubishi rally red custom paint a-spec rear bumper and...
  10. Suspension, Chassis & Brakes
    Anyone have a progress sway bar? Is it any good? I'm getting a good deal (at least I think), a brand new progress sway bar, skunk2 rear lower control arms, ingalls sway bar end link kit for both right and left side. All for $150. Good deal or no? Sent from my iPhone using Tapatalk
  11. Southern California For Sale: Local Pick-Up
    Hey whats up CRSX fam, unfortunately it has come to that time where i must part out my car.. I have several items for sale, so if you need any more pictures of any certain item just let me know! Located: SOCAL BEACH CITIES Contact: 1-949-396-9428 (TEXT PLEASE) Items must be picked up locally in...
  12. Exterior Mods RSX
    Here is a pic of my diffuser in progress. i still have to epoxy it, wetsand and so on and trim it afterwards. There will be a middle piece with fins also, which i will be doing last.
  13. Bolt-On Basics: RSX (Base)
    For the installation of the rear sway bar, is there anything else that I should buy so that I could replace while I am at it in installing the sway bar? I was told about lower control arms and endlinks and grade 8 washers. Are those actually needed or could I go without those things? Thank you...
  14. Suspension, Chassis & Brakes
    Hi there, I recently had to get my front left strut rebuilt after a fun little track day at Streets of Willow. Anyhow, after getting the strut reinstalled and installing the SPC front camber kit, I took the car to get aligned. The shop said they couldn't align me correctly because there was too...
  15. Exterior Mods RSX
    Sup yo, decided I'd post my progress and somewhat of a DIY/tip guide to make an exhaust tip heat shields for a bumper. I see quite a lot of people with burnt bumpers due to their exhaust tip. I haven't had any problems myself and I know the proper fix is to just hang the exhaust lower, but I...
  16. K Series Parts
    Link To RSX Link To EP3 Track Day-Autocross 425# front / 850# rear This combination includes two new specific-for-this-application spring designs. Crisp turn-in and much less body roll. Great chassis balance near the limit. The street ride is OK on smooth roads, and will 'communicate' small...
  17. Northern California For Sale: Local Pick-Up
    Sold http://forums.clubrsx.com/attachment.php?attachmentid=527793&stc=1&d=1487030448 Selling because it doesn't clear the plm header.
  18. Member Show-Off RSX
    Hey everyone, I guess its better late than never to start one of these progress threads. I picked the car up in Nov. 2016 bone stock with 113,xxx miles. I don't have all the photos of parts and repairs I've done since I wasn't planning on doing one of these; sorry! Here are a few...
  19. Want To Buy or Trade RSX
    Looking to get a rear progress sway bar located in the bay area.
  20. Southern California For Sale: Local Pick-Up
    Sold
Top