Acura RSX, ILX and Honda EP3 Forum banner
properly
1-20 of 57 Results
  1. Problems & Solutions RSX
    I recently purchased Acuity transmission springs for a more stiffer shifting feel (kinda like the mtech springs). As I replaced the oem springs with the new ones I went about it the right way and completed the process as far as putting everything back together. I made sure the shifter worked...
  2. Turbo RSX
    I have AEM tru boost and I dont know how to connect it to the ecu to adjust the boost.. Ive searched on the install but cant sem to find it.. any leads? thank you:fistbump:!
  3. Problems & Solutions RSX
    I have a 2005 RSX Type-S with a turbocharged k24a2 tuned with kpro. A while back my wiring harness rubbed through the heat wrap on my turbo manifold, burning and severing wires in my engine harness. I replaced the harness and had the map and tps connectors switched. I realized this pretty...
  4. Wheels & Tires EP3
    Don't mind my pathetic post count, and I will come back with some pics for this thread so others can find the answer in the future... I just picked up a VBP 2004 SIR a couple weeks ago, been buying parts and came across a great deal on some BBS's, wheel and sups specs; 17x7 +45 BBS RK (Silver...
  5. Wheels & Tires
    Tried to put on my new Work Emotion CR Kai rims and I can't get them centered around the hub, with concentric rings or not. The holes that the bolts go through don't seem to be large enough to move the wheel around and center it. I've seen lots of people on here with these rims and haven't seen...
  6. Turbo RSX
    What's going on turbo crew. I have a question about my new Tial Q BOV that was just installed recently. I currently have the 8psi spring inside. When I'm in boost and let off, it surges before it blows off. The vacuum is coming from the brake booster into a vacuum block, from the vacuum block...
  7. The DIY Garage RSX
    How do you properly remove the hatch? Is there a DIY? I did a quick search and found nothing.
  8. Suspension, Chassis & Brakes
    My ride is super bouncy, it's like I'm riding around just on springs... Increasing the dampening seems to just increase the stiffness, but the bounciness remains! At this point I'm thinking that I put too much preload on my springs when I installed them. The springs that come with the coils...
  9. The DIY Garage RSX
    ***please close****
  10. Problems & Solutions RSX
    Hey guys, I've slowly been reverting my car back to OEM because I bought it used w/some aftermarket parts I don't care for. Anyway I'm in the process of replacing the engine mounts, and I'm stuck on the mount underneath the engine (near the headers.) I can't align the holes for the long screw...
  11. Wheels & Tires
    Im wondering if this set up will work properly or anyway it can?
  12. General RSX Discussion
    Alright 2 questions in one: 1. How much would It cost to lower my Rsx (1-2 in) Ideally I would want to do it myself but I dont have the time/tools/knowledge so A shop would ultimately end up doing it. for everything part, time, allignment, install how much would it run. 2. Is there a...
  13. Problems & Solutions RSX
    I know very little about this stuff, so I had a mobile mechanic come to my home and do the work for me. He replace the a/c compressor, expansion valve, and dryer. The old compressor had blown up and there were metal shavings in the system, so he vacuumed out the system and had to flush it a...
  14. General RSX Discussion
    Hey guys, I searched around and only found that crappy scanned version of our owner's manual and I was all like: "Ew, what sort of BS is this? *vomits* There has to be something better around." lol Anyway, I Googled around and found properly made PDFs that are searchable and with links within...
  15. Problems & Solutions RSX
    My Buddys Camry (about 15 years old) has a turn signal not working properly. the right blinker works fine, but when you use the left one, it only works if you're barely pressing it down (like if you were gonna change lanes and didn't want to click it down fully) If you click it down fully, it...
  16. Problems & Solutions RSX
    Alright so I have a 02 RSX-S that I just picked up and the keyless entry is not operating correctly here is the issues and some points I found that maybe of interest. - When I press the unlock button you can here the actuator on the drivers side try to unlock it but it does not unlock. - When...
  17. Problems & Solutions RSX
    So i was recently in a side impact accident and had to take my 2005 base RSX to the shop. Apparently, they had to drain my windshield washer fluid for part of the fixing. I found this out when the jets weren't spraying. I think, simple fix. Just replace the cleaning solution, right? Well...
  18. Problems & Solutions RSX
    One day i go to fill up the tank cause its empty, i fill her up then the gas needle jumps up then falls down to E then gas light goes on, i drove like this for a while then it jumped to Full now this is inconstant because it gives the proper readings sometimes or what i think the tank should be...
  19. Car Audio, Security, & Electronics RSX
    One day i go to fill up the tank cause its empty, i fill her up then the gas needle jumps up then falls down to E then gas light goes on, i drove like this for a while then it jumped to Full now this is inconstant because it gives the proper readings sometimes or what i think the tank should be...
  20. Turbo RSX
    I recently installed a BOV on the Greddy kit and was wondering how do you properly adjust the BOV. I have a Greddy Type-RS BOV.
1-20 of 57 Results
Top