put

Hi my car started to act funny two days ago. When I take off on first gear it's ok till I hit 2k-3k rpm than the car loses all power and will not go. I can shift quick and get the car to second gear but as soon as I get to 3k rpm the car starts to jerk like it's not getting a smooth fuel or...

I just installed my coilovers and I used my Oem upper spring seat. Will I need to take apart or should I be good? Damn newbs I know haha.

So, going on over at http://forums.clubrsx.com/showthread.php?p=54478938 I was looking into getting HID lights in my car, hopefully breathe some new life into it and make it fun to drive at night again. I want to bring the discussion over to here. I'm currently looking at getting a new housing...

Will I notice a major hp loss if I switch back to sri ? Will my tune / powerband get all messed up ?

Hey guys so that's my wheel size and I put 245/40 size tires on the rim and they kinda look like there gonna be a pain in the ass to fit I'm not that low I can fit two fingers in the front and one finger in the rear and I haven't rolled my fenders or anything what do I need to do to make the...

Please explain detail from ECU to every detail because I'm still in school auto performance class still ain't learn much so asking for help to put on a HKS or GReddy turbo kit on my RSX type S K20 engine.

Hey guys I accidently put a full tank of 87 in my type S. Is it fine to use it then go back to 91? Also I hear a squirrelly noise at idle is it related?

hi? please give me some ideas. i replaced my axle on the right side. now i cannot get the nut on the ball with the cutter pin. it spins . how can i stop it from spinning. it has a shallow grove under it but i cannot hold it with a screw driver. because the grove is not deep.

okay so i know im stupid i wasnt paying attention and i put it in backwards and didnt realize until it it was backwards until i tried putting the terminals on and it until it started sparking a lot. as soon as i saw the sparks i noticed it was backwards and then i switch it back and tried...

Hello everyone, yes I did read many different threads before asking for your suggestion. I know there are 2 ways one either to cut the shield in order to put the new lug studs for front passenger side or change the whole hub and bearing assembly. It seems like changing the assembly would be pain...

Hello, so I was having a CEL which was pointing out to the tps having high voltage and it was because the type s I bought had an after market tb and the sensor could not be calibrated within spec. So I went to the dealer and bought a brand new stock TB and had my mechanic install it. After the...

Well I handed my 02 type s to my bro its got 208xxx miles on it I always checked to see if it was topped off every weekend and my bro sucks at it but every month or sohe will notice it right away needle rising up and he goes to check it and it's really low. What's the deal??

I picked up my first car, an rsx this past summer it only had a few mods thos including a mugen front bumper, carbon fiber trunk, 02-06 conversion and a few other things. I fell in love with the car the first time I drove it and still love it I bought it in Ontario and a picture of the way it...

Hi there. I got this A-Spec replica rear lip for my 2003 RSX. I looked on how to do that but the instruction manual was for an OEM one lip. The difference between OEM and Replica, is that the replicas don't got anything on the back side of it, only the piece of plastic with shape, with no marks...

a little more info on this i bought a friends old parts car to build up and drive for winter, i just put in the battery from my older winter beater which i just started and drove around to make sure the battery was good i just put the battery in and tried to see if i could at least get...

just wondering if there are any REAR seats out there, like Civic SI rear seats that i can swap into the RSX, i need something like the SI seats that do not have the middle plastic part. any ideas if the SI fit, or other model of seats i can throw there? doesnt matter cloth or leather

Smh smh. I took apart my transmission and put everything back.. Mounts, Subframe, Axles. Literally everything. I can't seem to get the sway bar back into its position. So picture everything in and the sway bar just laying on the ground. Hopefully I don't have to remove anything. Quick help...

Hey guys , i just bought a Rsx Type S 2005 and its already giving me problems.(should of checked the reverse when i bought the car) When i try to put it in reverse i have to push with alot of force over to the side then down , then when i put it back in neutral it gets stuck in neutral(stuck...

Okay, after i put my crank in and plastigaged the bearings i ordered according to the codes on the block and crank, i had readings telling me the bearing were too thin (this was without any lube on my main bolts). When i rechecked using APR Torque assemebly lube, Im getting reading from the...

Mods include: J's racing 70RS Full Titanium Catback AEM V2 Cold Air Intake Berk Technology 63.5mm Test Pipe Ballade Sports 70mm Throttle Body Here's one of the videos.. http://youtu.be/2Ko_DOK9-0A Here's the charts of the 3 pulls it made..