Acura RSX, ILX and Honda EP3 Forum banner

putting

  1. Thinking about putting in a strut bar, but don't really know what brand to get

    Suspension, Chassis & Brakes
    Hey guys, I want to put a strut bar in my rsx base model but don't really know what brand to get, there is so many, any ideas or thoughts? Thanks, much appreciated!!
  2. Putting a K20a2 into a 2006 Type S.

    Forum Threads
    Hello All, I recently totaled my 04 type s. I was able to purchase an 06 type s with a blown motor for a good price. I wish to put the 04 k20a2 into the 06. My 04 ecu has Kpro already. I need some advice as what needs to be done in order for the k20a2 to run properly inside of the 06 shell...
  3. Crunched this wire when putting rear coilovers on

    Problems & Solutions RSX
    :( fail crunched it good I’m gonna have to splice and rewire? Any tips? What gauge wire do I need to use ? 🤢 Sent from my iPhone using Tapatalk
  4. Idle problem after putting in park

    Problems & Solutions RSX
    2002 k20a3 base auto. So I recently noticed that after I installed my SRI that after I drive around and then put my car in park, the rpms go down to about 400 or so like it wants to die then goes back to normal idle. Other than that it runs great, could my SRI be causing the problem?? What do...
  5. Best oil? what should I be putting in?

    All Motor RSX
    Hello all, Im still new to the RSX. I've only had it for a couple weeks. So I have a 2002 RSX type s. with only 81,000 miles. All Stock. what would be the BEST oil to put in? I dont care about price. thanks in advance.
  6. putting new piston rings on, Pull motor, or pull of head and oil pan

    Engine Building & Design
    As the title says, i haven't made mind up about which would be easiest to do. my buddies recommend to just pull the engine and replace it that way, but with research it makes it seem like pulling the engine from the top is a hassle and I only have a cherry picker and i cant really just drop it...
  7. just putting this out there Camber for Track????

    Suspension, Chassis & Brakes
    Hey just was wondering for performance wise, and it may seem like a stupid question but was wondering about camber?? as appose to stock do you get better traction in corners if per say you have camber in the front like by 1.5- camber. Now I was just wanted to hear thoughts and input about track...
  8. Clunk when putting into gear at low speeds

    Transmission & Drive Train RSX
    So I posted this on ephatch, but no response as that forum's somewhat dead. This is on an EP3. The issue is whenever I shift at low speeds (from about 5-30 mph) there is a clunk. It doesn't happen if I let the revs fall to where they would be in the next gear. The clutch has only 30k on it. I...
  9. putting Revilla on blast, he's is trying to rip me off

    Buyer & Seller Disputes
    update: after all this he sent me the lsd. thanks post can be taken down
  10. When putting in a new mod.

    ECU Tuning RSX
    Recently I've put in an intake, and lowered the car on springs. ( Thank you thank you, it's about time I began to stance out this shit...) Anyways, I noticed the car seems to run a bit off, not to mention the engine light came on and the code is: P0128 (Coolant Thermostat) I'll deal with that...
  11. Putting an aftermarket seat into my daily driver

    Interior Mods RSX
    My driver's side seat is torn up pretty badly and I plan on buying an aftermarket racing seat (possibly two) and the proper hardware to install it into my 03 Type S. I don't want any lights on the dashboard after removing the stock seat/side airbag, and I don't want to have problems passing...
  12. Will putting Premium gas in my Base 02 RSX make a difference?

    Problems & Solutions RSX
    The past owner said he put Premium gas in it when it says it's a Unleaded gas car. Do I continue putting Premium gas or am I just wasting money? 2002 Acura RSX 5 Speed
  13. do you need a kpro if your putting on aftermaket headers?

    ECU Tuning RSX
    I was wondering if I get header for my 03 type s, do I need a kpro do go along with that? Or can I just put some headers on without it? Do I need it in order to put on the headers?
  14. Rpms and redlining with a swapped engine.

    Engine Building & Design
    Hey guys. I have an 03 rsx S but the engine is swapped from a k20a2 with a k24a2 from a tsx. They're both vtec and they both seem to kick in at around 6000 rpms. However my gauge says I redline at 8000, since the engine is swapped, would I still redline at 8000?
  15. Should I buy new rivet clips because im putting in fog lights

    Exterior Mods RSX
    will the rivet clips break? should i buy rivet clips?
  16. Loud crank noise after putting lowering springs

    Problems & Solutions RSX
    Hey I was wondering if anyone has had a problem when putting on some skunk 2 lowering springs on a 03 Type s , when I make a tight turn or any turn it makes a loud noise of scraping or something turning ? I don't think it's good at all? I put these on myself so idk what to do ? If I should put...
  17. Putting miles on the car..

    Auto Talk
    On average how many miles do you put on your rsx per week? the reason i ask this is because i got a new job offer thats at least a 1 1/2 hour long drive and dont feel like putting in so many miles on the RSX just to get to work, and moving over there is not possible for at least six months...
  18. stall after putting in gas ?

    ECU Tuning EP3
    My 03 ep3 k20a3 I/H/E jut had K-Pro installed and dyno tuned and it runs great. Except for the fact that after I fuel up I start the car and it kicks over but won't hold idle and stalls out. I can feather the gas and clutch and get moving. Once I get into second gear it's fine. When I come to a...
  19. i need help putting my rep ITR side skirts!

    Problems & Solutions RSX
    so i cant put my side skirts on. here are the pics.. help me please!! this is my car without sideskirts if i remove my old one and put the new one in like this where would i screw it? OR if i put it on my old side skirt it would look like this the problem with this is that it cant...
  20. Won't start after putting starter on car

    Problems & Solutions RSX
    I have had my 03 RSX (not a Type S) for several years with no problems. It was recently involved in a small accident and I just completed the repairs. Oddly, I had what appeared to be battery issues afterwards, but it turned out to be a starter problem. I replaced the starter and it spins...
Top