I have a exedy stage 2 clutch, I have been looking for the tq rating on this clutch. Does anyone know how much tq it can handle? Also the pedal is really stiff with this clutch. On my gsr I have a twin disc and the pedal feels like stock. Is this common on RSX's?

From what I've learned over the years, a lower Treadwear rating, lets say 100, will wear down faster, therefore indicating a soft compound meaning more grip? Whereas a rating of 600 is made of a harder compound, and will have less grip. Is this true? Can your Treadwear rating be directly related...

Hey just curious to see what rating plugs should be used with a GT28 turbo. And does the gaping still remain the same? Thanks.

►Here's another amateur question,... I'm installing 50w HID Driving lights onto my RSX. What amp relay should I use? 10a? 20a? 30a? Hella makes a 20/40 Weatherproof relay. What do they mean by 20/40? I plan on running the Power Wire for each relay straight from the battery. Thanks.

I'm boosting my car and possibly looking to get into an LSD. I was wondering what the power rating was for the Si's LSD?? My goals are for 350-400 hp. I've searched but couldn't find my answer. Doesn't help that I'm on my iPhone.

ok well i started my research and yes i have searched but im clueless on this one.. i was looking into full-race or peakboost kits..and among many of the choices is the turbo options.. ok my question is what or how is a turbo rated? idk if im putting that in the right terms but Garrett T3/T04E...

i used to have 4 federals set of tires with sizes 205/55/r16 91v i replace my two front tires and used same size federals but different speed rating which is 94w then rotated my rear tire both 91v put them on the front while new ones in the back 94w. I got my alignment done and everything also...

I got pulled over by a cocksucker cop. I was making a pass under 5k RPMs to pull into Subways and he gave me a ticket for my exhaust being too loud. It was a Borla exhaust..they're pretty much close to stock. Anyway, where can I find an instrument to measure how many decibels my exhaust is...

some people are telling me different things. Im looking to buy some coilovers soon and i want to go low as I can with staying as comfortable as possiable. I know you cant really have the good of both worlds. But someone is selling a set of 8k front and 10k rear, is this a good set up for...

im about to change my plugs for watever reason and i wanna go with NGK Iridiums i have cai, rbc, rh, exhaust, and K-Pro obviously i have to go with resistor plugs, but what cold rating do you guys recommend for my set up?:thumbsup: i've heard and read mixed things about going 2 steps colder or...

For competition purposes, i'm looking for tires with 201 and above threadwear. Currently Kumho MX's look like a good choice for me, any other ones? recommendations? reviews? Thanks

Im doing new lowering springs with struts tonight, how many lb/ft should i be torqueing the bolts back down too? Or is the impact gun tight enough? Tried searching

I tried searching and only found one guy who thinks its about 90a. Is this correct? The reason I ask is because I'm in the process of setting up my audio components in my evo and a lot of guys on the evom forum are telling me that the evo's stock alternator can't handle 1000w rms power. I don't...

Sold to elemenohp33 :)

I was wondering how many miles the stock Michelins get on the 2006 RSX-Type S? If anyone knows, please let me know. I am unsure if they are rated 50-60k?? Thanks

Ok... I have two sets of the legacy Utopias installed right now. they're both 6.5" sets though. I need the power rating for the 7" type, and the 5.25" type. since none of the online stores still stock the legacy Utopias (the ones prior to the Utopia Be) and the focal site doesn't still...

So i purchased a set of ESMM, i understand that after the install i will experiance more dash rattle and interior vibrating my question to you all is how bad or significant will it be. My dash already rattles at 7500k+ rpms Do the pro's weigh out the cons? On a scale from 1-10 (10 being the...

Here is what I'm talking about: 4100-4300k is what OEM car makers use in their cars. Manufacturers such a BMW, Mercedes, Lexus, Toyota, Honda, etc. They will stay with 4100-4300k and never go beyond it, with the exception of BMW. BMW has a seperate "color-matched" bulb that you can buy which is...

Ok, so i have a base 5 spd w/ mod I/H/E, and ever since i have had my car i always drive it hard and put mid grade octane 89. My question is, is it better to use just 89 or am i wasting my money? Does 89 give me better gas milage and performance results?

OK.... I was just wondering what the 9:1 compression 5-speed RSX internals would hold (HP Wise)..... i plan on runnin boost.... cybernation runs 7lbs on the stock 11:1 type-s i was wonderin... since the 5-speed has lower compression what kinda boost (like 12, 14 maybe?) could i run without...