Hello, im new to this and would appreciate some help. I have an 04 rsx type s k20a2 with a skunk 2 pro series manifold, dc headers, stock cams, Cai, and a cheap cat back from Amazon. I cut my cat off and welded a pipe there so im not running any 02 sensors. I recently got hondata/kpro and chose...
Does anyone know why my A/F Ratio is not reading on KPRO ? I have a check engine light code for "P1166". I know it's a code for the primary but wouldn't it still read A/F Ratio ? I was assuming this would apply for the Secondary o2.
Any help would be appreciated.
Hey guys, so I recently got Kpro and I'm trying to run my AF to a pretty linear curve at 13:2 - 13:5. I have it relatively close, just a few more tweaks. But right around 4300 (vtec) it spikes up to about a 14:1. I've added fuel to this area but it still spikes. So my question is, is it supposed...
Is it possible to swap out for a taller 6th gear [ratio]?
I have been researching online that it is somewhat possible to help improve gas mileage to swap a taller final gear ratio into your drivetrain, but what I am looking for is specifically highway mileage to improve. I have a 120 mile...
I just saw this YouTube video by haltech showing that af ratio doesn't do much to the power when changed but even small adjustments to the ignition timing make huge differences. Does anyone have anything to elaborate on this with? I'm really curious if it's the same way for the kpro or for the...
I know a lot of people here aren't a big fans of the torque app but it helps me diagnose issues from time to time. So i have a Bluetooth adapter and I use torque to get fault codes and read real-time data off the ecu. What I noticed is that torque doesn't report the Air/Fuel ratio on my car (02...
searched the forum and couldnt find a thread on this? anyone done it. just bought a guage off ebay wasn't expensive like $50. not a wideband btw. but how do I hook it up to the 02? and were?
What should be the correct a/f readings for a Na 06 type s? Just have I/rh/e. It's reading 11.5-13 wot, 13-14 part throttle, 14-15 idle. I'm just wondering the correct a/f readings for a Na. I'm still new to kpro
Selling my stage kelford b cams never been used still in box asking 400
Also selling aem a/f ratio guage never used 170
Glowshift oil pressure guage never used 25
Both guage with pillar 200
Title says it all 281 236 5800. Works perfectly fine has wiring needed and comes with pod fit for the rsx. Throw me offers I need this off my hands. Prefer dealing locally but if buyer wants to pay shipping thats fine.
I'm selling my custom ratio tranny. Tranny was assembled by synchro tech and includes the following:
Custom 5 Spd Tranny (mph @ 7500)
Ep3 1st - 3.062 45 mph
Ep3 2nd - 1.769 78 mph
Element 3rd - 1.355 102 mph
Element 4th - 1.028 134 mph
Element 5th - .825 167 mph
All Gears WPC treated
As per the title, I'm wondering which one is a better mod for the K20A3. Increasing the displacement of the lower block or increasing its compression ratio?
Recently I changed my dual runner black abs plastic intake manifold to the RRC intake manifold from a Civic FD2 Type R...
Can I put a 02-04 RSX S tranny in 05-06? Will the car run correctly, as it doesnt matter if the speedo is off, Im racing dirt track and trying to get the best ratios for different sized tracks with one transmission.
Trying to figure out the best way to meet my goal on Pump 93 gas.
Building a K24/20 this year and wondering can I reach my goals on Lower Compression and More Timing VS Higher Compression and Less Timing?
Most builds I See are running 12.5.1 and are making the numbers I want from my Build...