Search Results for ‘rca’

I was wondering if the RCA Ball Joints from Hardrace will have clearance issues with the factory 02-04 Type S 16s? I don't want to install them and find out that the control arm will be rubbing the inside of my wheel. Anyone have this setup?

I'm close to Pasadena Text at 310-740-2039 Need it today

I bought these brand new and have not opened the packages. Only the boxes for the photos as shown. I bought them for my ep, but sold the ep shortly after when I saw a deal on an s2000 that I could not pass up. I have no use for these now since I no longer have the ep. Someone please take...

Hey all, i've had a double din touch screen installed for a while now working fine, but as long as I can remember even with the prior radio its always had a whine through the speakers. I've relocated a ground for the radio, played with the coil packs, changed around RCAs and twisted and turned...

Just did ES bushings, A SPEC suspension, dc5 tie rods, new wheel bearings, and buddy club RCA extended ball joints. To say the least it's been a long day! Finally finished with everything and on my last wheel this happened.. The ball joint has slid down and isn't seated as it should be. They...

Im in the process of wiring the remote wire to the back of the stock head unit and was wondering what color wire to tap into. Same goes for the line out converter for the rca's. really appreciate the help.

Brand new - Hard Race front sway bar end links (still in package) - $340 Brand new - Hard Race RCA's p/n HR-6476 for 02-04 DC5 - $180 (removed from packaging by online retailer for shipping) Brand new - Energy Suspension front control arm bushing set (blk) - $40 Used - PLM/ CRSX race header for...

Bought some! Moderators close please.

so i got my headunit in (kenwood dnx5140) and i have a type s but my harness took front and rear pre outputs and now i have no where to plug my rcas from aftermarket amp my question is do i have to bypass my amp to free up room for my aftermarket amp rcas

After searching I decided to go with this particular setup. I realize I need to match spring rate with tire setup as well as weight reduction mods etc. (none). My question is: For a moderate drop (1.5") will the RCA compensate for that drop? Or will I still blow through my suspension travel...

any one have any input on witch of these two might be the better part, the bc's are 10 dollars more but is that 10 paying for the pretty colors compared to the hardrace? any insight would be great, i already know that i want to get these i am just not sure what brand to get, i have a bc shift...

Like title state 650 RC injector No clips for sale 250 with shipping txt for pics 9787618058

So I finally got my control arm bushings pressed in and got my RCA's installed. However, when I installed the knuckles today, it seems that the front of the car has been raised about .5 to 1". I'm not sure if this is because of the suspension being unloaded for a while and needs time to settle...

close

Name: mike Location: portsmouth Means of contact: 757-647-1127 text any time Price: $275 firm w/o surround $350firm with RCA 6 speaker home theater 1000 watt Description: 57" Toshiba projection screen hdtv. Works in every way. Streams from 320p standard up to 1080i which honestly on this thing...

just as title says i am looking for a RCA ball joint for my 03 rsx type s and a rear camber kit to run -2 camber. LMK: 707-696-8348

I am having issues getting the Buddy Club ball joints to fit into the knuckle on my 05 type-s. I did some research on here and found a few threads talking about 02-04 BC ball joints but not a lot of info on 05+ BC ball joints. I took my whole Rotor and Hub assembly down to a machine shop with...

Brand new in box, sold my ep3 so I have no need for these $140 shipped

just wondering, the pic of the roll center adjusters has 2 little snap rings in it and i got a pair of rca's that didnt come with those. I have an 05 type s, just wondering if those rings were supposed to come with it or if the pic is just of a diff one that needs them and my car doesnt need them.

just wondering, the pic of the roll center adjusters has 2 little snap rings in it and i got a pair of rca's that didnt come with those. I have an 05 type s, just wondering if those rings were supposed to come with it or if the pic is just of a diff one that needs them and my car doesnt need them.