Search Results for ‘reading’

Greetings, 2004 RSX Using paperclip method, blink code displays code 21-1 (passenger seatbelt pre-tensioner). Took it into the dealer (this should be covered under warranty), and their scan tool displays no codes (convenient). Anybody had this happen? Talked to the tech and he said maybe it...

I finished my battery relocation the other week and now all of a sudden my digital distribution block (Xscorpion DMANL3034P) is displaying a voltage of 0.00V. I know this is incorrect as I have a digital display on my positive battery terminal which reads the correct voltage and everything is...

Does anyone know why my A/F Ratio is not reading on KPRO ? I have a check engine light code for "P1166". I know it's a code for the primary but wouldn't it still read A/F Ratio ? I was assuming this would apply for the Secondary o2. Any help would be appreciated.

Hey everyone im new to the forum and haven't introduced myself atm but ill get to that later So I'm having this problem where the car chokes and jerk for like a second or two. Don't get me wrong I've read post about the same problems for the last 50 pages but mostly had kpros. I only have i/e...

This weekend I finally decided to install my Kpro 4 ECU (ECU is a PND that was sourced at the time, and Kpro installed) into my EP3. I removed the ground terminal on the battery, then proceeded to remove my PRD ECU. I installed the Kpro'd PND ECU and re connected the battery. Pulled out a...

I have a 03 type s with 140k and I noticed my speedometer reading is inaccurate, way off. I'm going 40mph but my speedo is showing 51mph. Also the rpm needle is a little bouncy, not bad idle bouncy I mean it's actually bounces up when acceleration almost like the actual needle is loose. Idles...

Hello, I have been researching this, but cant seem to find a definitive answer. I have a stock RSX Type S, what should my oil pressure reading say when idling and what should it say while cycling through 1st, 2nd and 3rd gear doing regular driving? I am using a Prosport EVO oil pressure gauge.

Hi all, new member here! I've been lurking around awhile, learning and fixing some small things on my EP3. I managed to get myself into some trouble this morning though. I removed the cluster to check the bulbs as most of it is dark. Some of the bulbs were ok, so I disassembled the cluster to...

Finally had the time to get on the dyno and get a tune. For some reason, my map sensor is reading 23psi at 4K rpm. The setup is a 11psi 3" supercharger pulley with k20a2 crank pulley, which should put me at 11psi. I have not changed anything on this setup since the car was running before at...

Any One....

Ok so I have just finished my k24a2/k20a2 frank build and we just started the motor and ran it today. We went through the whole break in process and noticed that my speedometer was not working. I had some tranny work done, new clutch nd carbon synchros rebuild kit. I am getting ready for a tune...

I've search up and down on multiple forums and nothing has came close to my issue. My brand new O2 sensor have 2 black wires, 1 blue and 1 white. I have done a continuity test on the A plug: A1 - is a ground to the O2 sensor A6 - connects to white wire of the O2 sensor A16 - connects to blue...

Hey for some reason my temperature in the s2k cluster keeps reading backwards from hot to cold, what could possibly be switched up?

I know a lot of people here aren't a big fans of the torque app but it helps me diagnose issues from time to time. So i have a Bluetooth adapter and I use torque to get fault codes and read real-time data off the ecu. What I noticed is that torque doesn't report the Air/Fuel ratio on my car (02...

Here is the link to the Video of the code I currently have i just finished changing the clock-spring and that fixed the horn but not the SRS light. Thanks In Advanced to the people on this site helping out. EDIT: Here is a longer CLIP of the code.

Okay I've done my searching all around the net and here. Trying to tune my car currently with tktune and my car keeps bogging when I try to go wot. Injectors surge And at partial throttle car has no power and seems like its either not getting enough fuel or too much. Also once I connect kpro...

Trying to troubleshoot a misfire cyl 1 and 2 using live data, can anyone give me the vacuum reading at idle, stock 2002. I'm only getting 9inHG.

I did a voltage reading on my TPS and got .53 at closed throttle. I know this is out of calibration, Im wondering if I will be able to adjust it back into range or will I need to replace it? I don't have a dremal or I would have already tried ;). I'm trying to diagnose sluggish performance and...

So I was helping a friend street tune his 05 RSX type-s and the p1166 code and p0134 code kept coming on. The primary o2 showed no response. He does have the 02-04 (Denso I believe) o2 in it. Since it was not reading anything we jacked my car up and pulled mine off only to find it didn't work...

delete