Acura RSX, ILX and Honda EP3 Forum banner

rear

  1. Problems & Solutions RSX
    So i just finished installing 20mm spacers up front to make room for the brembos i just got, and figured I’d do 15mm in the rear while i was swapping out all of my brakes anyway. Fronts went in super easy, tapped them in with a hammer to start then used two oversized nuts with a lug nut to draw...
  2. Suspension, Chassis & Brakes
    I have Koni Yellows and Eibach Sports on my 04 Type S. I was trying to troubleshoot a little noise coming out of the rear and I thought I would swap the rear struts to see if the problem followed or not. Anyhow when I was time to put them back, I noticed that the bracket where the lower hole...
  3. Problems & Solutions RSX
    Howdy. It appears I have an electrical problem that prevents my rear lights from coming on in the park lights position so I plan to use a work around until I can solve that larger problem. I want to replace the outboard park lights with LEDs and run the wires to a 12v battery to have them...
  4. Problems & Solutions RSX
    Hey guys, did a search on this and didn't find any answers, so I'll start a thread. Just noticed today that there is a clicking sound coming from the rear left (driver side) wheel area. It's not very load at all, and if it does happen when the car is on, I can't hear it because of the exhaust...
  5. Suspension & Brakes RSX
    Hi: Im looking for the rear upper strut DC SPorts bar, if somebody has one for sale let me know. thanks
  6. Problems & Solutions RSX
    I am trying to fix my motor mount fast (within today). There is a store with a rear mount, but their site says its only compatible for years 2002-2004. Does any one know if the mount is different for 2005-2006? Here is the part in question...
  7. Want To Buy or Trade RSX
    As the title states. Putting the car back to stock and looking for the OEM arms. Thanks in advance!!!
  8. Suspension, Chassis & Brakes
    I have some eibach sportlines on my type s but the rear sags quite a bit, I guess its by default since the rear springs drop lower than the front. I want to install 30 mm strut spacers but it looks like i need to install longer studs. Does anybody have any experience installing strut...
  9. Problems & Solutions RSX
    I own a Base 2004 model. I picked up a couple of splash guards ( part # 74591-S6M-000) for the back of the rear inner fender from a 2003 wreck since my car did not have them. How do these install at the wheel well opening? Does the splash guard go in front of the wheel well lip or behind it? I...
  10. Suspension & Brakes RSX
    Selling my genuine Mugen jdm rear strut bar with minimal scratches. I’m looking for $400 shipped. I’ll be shipping the item from Manila Philippines. Pm me or text me if interested. I can send pictures through viber/messenger . My number +63 917 807 5183.
  11. Problems & Solutions RSX
    So far I've checked continuity on fuse, it's fine. And I checked the power coming into the rear window defroster, not getting any voltage there. What's next to check ? I've ruled out any issue with the rear window grid as no power is even getting to it
  12. Southern California For Sale: Local Pick-Up
    Have the last few parts of my RSX that I'm selling. Prices are FIRM. Any questions or want more pictures txt me 818.800.8772 Located in San Fernando Valley (Near Cal State Northridge) 05-06 Rep Mugen Rear Lip (Not sure what the brand is) $100 HKS Hi-Power CatBack (Type-S) $200 Function...
  13. Exterior Mods RSX
    Looking for OEM A Spec rear lip for 05-06 OEM only no replicas, color doesn't mater, but Magnesium is a plus. I can buy new, but will hate having to paint over a perfectly good paint job. I can get new shipped to my door.. Estimated Order Total:$386.69
  14. Problems & Solutions RSX
    Hi, Hope someone can please advise..... A while ago, I backed into something and some of the edges along each side of rear bumper cover slightly popped out. See photo of each side of bumper. I circled in blue the edge area that popped out. What is best way to fix? Pound on the area with...
  15. Suspension, Chassis & Brakes
    Has anyone here changed out the rear upper outer control arm bushings? It’s the bushing that is in the top of the knuckle or spindle whatever it’s called. My question is I can’t tell if there is a metal sleeve in there or if it’s just a rubber bushing. My new whiteline bushings do not have an...
  16. Wheels & Tires
    I'm ordering RPF1 17x9 +45 square set up. Got the hub centric rings 64.1 to 73mm hub rings. Will have fenders rolled. 1. Told I need spacers for rear, at least 10mm. Anyone have this setup who can comment? 10mm enough or more? 2. Does front need spacers?
  17. Suspension, Chassis & Brakes
    I didn't realize the progress bar used adjustable end links when I bought the hardrace OEM links last year. Will these install correctly or cause anything crazy as far as the vehicle dynamics go I should know?
  18. Exterior & Interior RSX
    Sup Everyone, I have pictures of all products for sale just pm your number and i can text you them. Or give me some time and I’ll post them up soon. 05-06 OEM tai lights w/new spacers, new base gasket (mint condition) -$225 or make offer 05-06 rear bumper(ABP,needs re-painted) -make offer...
  19. Want To Buy or Trade RSX
    Title, PM me
  20. Want To Buy or Trade RSX
    Looking for spoon sports dc5 rear strut bar or mugen rear strut bar please! Need authentic and must be good condition. Lmk thnx. Dont OP. Haha. Must be shipped or pick up if local near
Top