just bought a JRSC and need to upgrade the stock clutch. i've read all the countless pages of 10 year old threads on clutch recommendations, and it seems (at least a while ago) that most guys go with a stage 2 for this level of boost. my desire is reliable clutch/trans operation, and...

Hi guys, Sooooo I'm on the market to buy a front strut bar for my Rsx. The problem is, is that I have a dump tube (hood exit) is in the way. I have a k24a2. What front strut bar will clear to the front of the dump tube? I don't think the Mugen front will make it?

I am located in Chestertown, MD 21620. My RSX needs trans work and every shop I talk to around here says they don't work on this particular car/trans. (5 speed base) So if anyone could refer me to a place that does good work for the right price let me know. Preferably not too far from me...

So I have a 04 EP3 with HFP suspension I installed a while back. I just noticed one rear shock is leaking so it is probably time to start looking at replacements for all struts. I am looking at two options: replacing struts with Bilstein ones to keep the HFP springs setup, or replacing the...

I've got a 2003 RSX and since I've had it, the compressor has been locked up and needed to be replaced. I'm finally about to do this with my friend but I'm not sure which compressor manufacture would be best. My friend (an experienced mechanic) said I should look at rock auto to buy a...

Hi Guys, You may have seen my prior posts - got my built K24/k20 putting down 269whp/217wtrq and it looks like my CC Stage 1.5 clutch is starting to go. That said - does anyone have recommendations for a clutch that will hold ~300whp/~250wtrq well and still be daily drivable?

Decided to go turbo and need a little advice on what turbo to get. I've been looking at numerous builds, and different turbos so leave the search comments out:thumbsup:. So my needs are basically this... I'm only looking for a mild DD setup with occasional track days, so more of a street...

I cannot believe I could not find an existing thread for this. Does anyone have a recommendation for a good, but inexpensive, ODB II Reader? One that allows resetting the codes! Thanks!

Hello all, can any one reccomend me to a upholstery shop in the long island area. Im looking to get my red recaros in better condition an i just dont want to take them to any shop. Last thing i need is one of these shops messing up one of my seats. All and any help is welcome, thank you...

Have the family in from Florida and looking to take them out to a (nice, clean, and safe) shopping mall. Trying to avoid Roosevelt Field, Queens Center, Green Acres since I've been there way too many times and getting tired of them...Prefer to stay in NY but willing to travel to NJ. Thanks

Hey guys n gals, just got into an accident where I ran into a guy and destroyed my front end..bumper, pass fender, headlights, etc.. anyone recommend a really good shop in the lower mainland, BC to do my repairs?? It's gonna be through ICBC and I'm concerned about the color matching & quality...

I've had OEM rotors for my car always but tried different pads. I don't track my car and was looking for a street setup that works better than OEM. I'm going to try the stoptech pads that are sold on clubrsx for my Type-S. However, I've heard mixed about the centric rotors. I'm staying away...

Been driving with a bad CMC for about a while now, finally looking at replacing it. It's my second OEM CMC failure in under a year (first was direct replacement, second was Civic-sourced), so I'm no longer interested in the OEM ones. I see the K Series Parts store no longer carries Omni-Power...

i am looking to change my rims, and i would like some opinions on which colors of rims to get, my s2k is yellow. oh and some recommendation for 5 or 6 spoke rims too.

as the title says i need a good place with a good quality for cheap price tints for my rsx... im near rockville, MD i dont want to drive more than 20 miles from where i am soooooo i need your help guys..

Hi guys, I need some suspension work done, some lights checked out, and my engine inspected asap. Does anyone know a great Acura mechanic in the SoCal area? Preferably near Irvine / Riverside / Laguna. Thanks in advance guys.

Hi Guys, My car was just recently broken into and luckily nothing was taken & no signs of visible damage! I am currently using a older Compustar 2W900FMR series and I would like to upgrade to a newer/better alarm system. I was wondering what you guys recommend aka Viper or a newer...

Long story short, the head gasket in my K20A3 blown, anyone can recommend a shop or a mechanic that can do it for CHEAP? some guy quoted me $400 for parts and labor, and told me he could get it done in 2-3 hours :noes: not sure if I should trust that, but if anyone can recommend me someone that...

Hey guys, just picked up a set of '07 TL Type S wheels that are 17x8. I'm running Eibach Pro Kit and was wondering what size tire is recommended for this application. I was thinking 225/45-17. Thanks for the help.